the log shows a lot "server" errors, also 3:192.168.1.133 looks suspicious, maybe wrong ip at the settings (I never used the vu+ addon, so could be normal) - do you have some log at the Enigma side that maybe could hint to some problem ?
ERROR: PVR - GetEPGForChannel - addon '3:192.168.1.133' returned an error: server error
ERROR: PVR - GetEPGForChannel - cannot get EPG for channel 'Prima +1 HD' from client '400091357': server error
ERROR: EPG - Update - failed to update table 'Prima +1 HD'
ERROR: PVR - GetEPGForChannel - addon '3:192.168.1.133' returned an error: server error
ERROR: PVR - GetEPGForChannel - cannot get EPG for channel 'TV Barrandov HD' from client '400091357': server erroradditional
NOTICE: CAESinkPi:AddPackets Underrun (delay:0.00 frames:2400)
ERROR: COMXCoreComponent::GetInputBuffer OMX.broadcom.audio_splitter wait event timeout
ERROR: CAESinkPi::AddPackets timeout
ERROR: CActiveAESink::OutputSamples - failed
ERROR: COMXCoreComponent::GetInputBuffer OMX.broadcom.audio_splitter wait event timeout
ERROR: CAESinkPi::AddPackets timeoutlooks like it get the date too slow or not at all from the vu
I was having your same issue on a raspberry pi 2..
I m not streaming from Enigma box..but streaming from a media-server that we r not allowed to talk about here..so no support for me..I understand that..
For now I resolved it buy staying on 8.2.0.1 which is working perfectly..
For now I resolved it buy staying on 8.2.0.1 which is working perfectly..
there is no 8.2.0.1 for the RPi so likely that wasn't the same problem
there is no 8.2.0.1 for the RPi so likely that wasn't the same problem
Not sure but I m using it and downloaded officially and working nicely
| release date 2017-10-29 20:43 |
128M |
Found some logs from the box (enigma)
- The stream plays for few minutes, then the audio starts glitching and after few moments screen comes black. UI is responsive sometimes so I can exit out, but it's pretty much coinflip (lags out).
Yep, can confirm same exact issue. Last known working version is 8.2.3 for me.
there is no 8.2.0.1 for the RPi so likely that wasn't the same problem
Actually, the 8.2.0.1 was hotfix for RPi devices to fix issues in 8.2.0
Actually this issue is holding me from buying the Rpi 3b+ as will have to install 8.2.4 or higher and not sure if it will work....
Did you try to go to system settings-resolution and refresh rate and choose something lower then what you are using?
If you'r getting the errors on PVR also try to edit the Pvr settings-playback-fallback framerate..
I get this on certain radio streams from TVH server on my Pi2. Don't know if its the same underlying issue though.
I am running the latest RPI image, but this problem has persisted over just about all the versions I have tried.
I have switched off visualizations to test if its related to that - but its to early to tell yet.
Shoog
Last known working version is 8.2.3 for me
if you downgrade it works ?
could you try 8.2.4 just to minimize the applied changes to review ?
btw the log tells
[eMPEGStreamParserTS] broken startcode
[eDVBPESReader] Created. Opening demuxso not really helpful
I get this on certain radio streams from TVH server on my Pi2. Don't know if its the same underlying issue though.
I am running the latest RPI image, but this problem has persisted over just about all the versions I have tried.
I have switched off visualizations to test if its related to that - but its to early to tell yet.
Shoog
Post up log, we can find a match. Maybe.
if you downgrade it works ?
could you try 8.2.4 just to minimize the applied changes to review ?
Yeah, downgrading to 8.2.3 makes the stream running okay. 8.2.4 - 8.2.5 were doing the same issue as #4 described.
To rule in/rule out the RPi firmware, can someone copy the following firmware files from 8.2.5 to their 8.2.3 installation and see if they start to experience the same issue:
/flash/bootcode.bin
/flash/fixup.dat
/flash/start.elfTo rule in/rule out the RPi firmware, can someone copy the following firmware files from 8.2.5 to their 8.2.3 installation and see if they start to experience the same issue:
Code/flash/bootcode.bin /flash/fixup.dat /flash/start.elf
After moving these files to 8.2.3, the issues occur.
13:45:47.572 T:1913648032 ERROR: COMXCoreComponent::GetInputBuffer OMX.broadcom.audio_splitter wait event timeoutfull log from 8.2.3
13:39:18.029 T:1945626272 NOTICE: ADDONS: Using repository superrepo.kodi.krypton.repositories
13:39:18.030 T:1945626272 NOTICE: ADDONS: Using repository repository.lazymanKindly remove all illegal repository/add-on crap from your Kodi setup, before asking for more support on this forum. I'm yet sure about the kodi-czsk repository...
I done it the other way round...moved firmware from previous 8.2 to 8.2.5 and now have a working 8.2.5 it that helps..
Besides black screens was occasionally getting a grey dotted screen with horizontal red lines..never seen it before in other versions...
Yep, this version is fine. As a temporary fix seems to be ok.
Mine is also giving me that version a3d7660e6749e75e2c4ce4d377846abd3b3be283 and I'm on 8.2.5 but with 8.2.2 firmware...just changed the files millhouse suggested..
Also I m starting to get issues from 8.2.3 but rarely...8.2.4 and 8.2.5 get frequent blackscreens and freezing..Noticed that my pi is also using more memory when idle...on 8.2.2 it'snormally at 30% when not being used...after 8.4 it goes up to 45% when idle..
Need to find some time and provide some logs..