Posts by deancan

    Quote

    LibreELECR:~ # vcgencmd version

    Oct 24 2017 17:13:32

    Copyright (c) 2012 Broadcom

    version a3d7660e6749e75e2c4ce4d377846abd3b3be283 (clean) (release)

    Yep, this version is fine. As a temporary fix seems to be ok.

    To rule in/rule out the RPi firmware, can someone copy the following firmware files from 8.2.5 to their 8.2.3 installation and see if they start to experience the same issue:


    Code
    1. /flash/bootcode.bin
    2. /flash/fixup.dat
    3. /flash/start.elf

    After moving these files to 8.2.3, the issues occur.

    Code
    1. 13:45:47.572 T:1913648032 ERROR: COMXCoreComponent::GetInputBuffer OMX.broadcom.audio_splitter wait event timeout

    full log from 8.2.3

    I get this on certain radio streams from TVH server on my Pi2. Don't know if its the same underlying issue though.

    I am running the latest RPI image, but this problem has persisted over just about all the versions I have tried.

    I have switched off visualizations to test if its related to that - but its to early to tell yet.


    Shoog

    Post up log, we can find a match. Maybe.



    if you downgrade it works ?

    could you try 8.2.4 just to minimize the applied changes to review ?

    Yeah, downgrading to 8.2.3 makes the stream running okay. 8.2.4 - 8.2.5 were doing the same issue as #4 described.

    Found some logs from the box (enigma)

    • The stream plays for few minutes, then the audio starts glitching and after few moments screen comes black. UI is responsive sometimes so I can exit out, but it's pretty much coinflip (lags out).

    Yep, can confirm same exact issue. Last known working version is 8.2.3 for me.


    there is no 8.2.0.1 for the RPi so likely that wasn't the same problem

    Actually, the 8.2.0.1 was hotfix for RPi devices to fix issues in 8.2.0

    ^

    Code
    1. 16:38:23.838 T:1762653088 NOTICE: AddOnLog: VU+ / Enigma2 Client: Open - VU+ Addon Configuration options
    2. 16:38:23.839 T:1762653088 NOTICE: AddOnLog: VU+ / Enigma2 Client: Open - Hostname: '192.168.1.133'
    3. 16:38:23.839 T:1762653088 NOTICE: AddOnLog: VU+ / Enigma2 Client: Open - WebPort: '80'
    4. 16:38:23.839 T:1762653088 NOTICE: AddOnLog: VU+ / Enigma2 Client: Open - StreamPort: '8001'

    Settings seem to be okay. The addon seems to be bugged when it comes to logs, because the EPG loads fine in "Television" tab in Kodi. I'll try to enable logging on Enigma to see what happens.

    The problem occurs when streaming from Enigma box. I'm facing this issue since 8.2.4; persists in 8.2.5.

    • Running Libreelec 8.2.5 on Raspberry Pi 2 Model B
    • The stream plays for few minutes, then the audio starts glitching and after few moments screen comes black. UI is responsive sometimes so I can exit out, but it's pretty much coinflip (lags out).
    • How to reproduce: Play the stream
    • Using: VU+ / Enigma2 Client
    • Log (pastebin)


    Thank you. I'll try to provide more if needed.

    +1 , 8.2.4 has been really problematic for me on RPI2. I experienced system freezes during playback which only reboot fixed. The only workaround that seem to fix this is rolling back to 8.2.3