LE9.0 remote configs ir-keytable Amlogic devices


  • To eliminate confusion with the old remote.conf

    Members can share their remote files here in this thread.

    A photo of remote may help those with obscure named boxes.


    Remote configurations for WeTek/Mecool/Minix/Tanix TX5 TX7 Tx Mini TX3 have already been baked into the COMMUNITY images.


    Update Device tree if you receive the 'no devices found' message or your remote does not work with above devices with remote baked in image.



    Note : If you have changed remote Delay and Period due to sluggish commands, please disclose.

    TX3 Mini that i used.

    Changed Repeat delay to 375 ms and repeat period to 100 ms

    Code
    1. ir-ctl -t 50000
    2. ir-keytable -D 375 -P 100

    Also please read LE9.0 remote configs ir-keytable Amlogic devices

    Further tweeks

    Edited once, last by kostaman ().

  • Hi,

    I have generated a config file for my Beelink GT1 and GT1U remote. I think the ir codes are the same with the Mini MV III II. I have mapped a few keys to use it with Libreelec. Please take a look in the beelink_gt1 file.

    Files

  • T95m/T95N remote (pic).

    * The remote from my old M8S Plus (S812), which looks very similar, works correctly right out of the box.

  • To get scancodes of other protocols than NEC and rc-6 (which are the current default setup) you can also simply use

    ir-keytable -c -p all -t


    But note that unfortunately ir-keytable -t doesn't show the protocol for decoded scancodes. That's a pity because for proper operation the protocol has to be included in the header of the keymap file.


    So, in general, when creating a keymap file it's best to manually set a single protocol, eg

    ir-keytable -c -p nec -t


    A lot of the boxes from asia seem to ship with NEC protocol remotes, so -p nec is a good start. If that doesn't work try -p rc-5 or -p rc-6, these are also very popular protocols. If you still get nothing try the other ones.


    so long,


    Hias

  • X92 modified remote with longpress buttons


    To use all described functionality:

    1. copy the file "X92" to "/storage/.config/rc_keymaps/" and "rc_maps.cfg" to "/storage/.config/"
    2. copy "keymaps.xml" to "/storage/.kodi/userdata/keymaps/" and "Lircmap.xml" to "/storage/.kodi/userdata/"
    3. copy "98-eventlircd.rules" to "/storage/.config/udev.rules.d/"
    4. ir-keytable -a /storage/.config/rc_maps.cfg -s rc0
    5. reboot

    Also I use ir-keytable -D 475 -P 125 for delays, you can test your delays.

    And ir-ctl -t 20000 for release button delay(20000 is minimal for this remote, if doesn't work try 21000 and upper)



  • This is my config for the RIII25.

    The keys above the directional keys and the power button are IR. All others are RF.


    Files

    • riii25.zip

      (730 Byte, downloaded 166 times, last: )

    'You're like a child who wanders into the middle of a movie and wants to know -..' ~ Walter Sobchak (The Big Lebowski)

  • Hi,


    Here is a a95x remote config file for lirc


    51sKkN05cHL._SY355_.jpg

    Files

    • a95x.txt

      (555 Byte, downloaded 876 times, last: )

    Edited once, last by adm: update the home button mapping ().

  • Thanks gulp79, your remote is the same as mine, I have a H96 Pro (not +)


    It works on my box


    1516218993727406599.jpg

    NUC with LibreELEC Controlled by Logitech 350 / Beelink MiniMXIII S905 2G/16G 1000M Lan CoreELEC from NAND

    MyGica 510b Now gone to the Great Media Centre in the Sky

    H96 Pro (S912) CoreELEC 8.95.5 Controlled by Harmony 650 (configured as Mecool KIII Pro)

    Mecool M8S Pro L running Android Leia RC1 / HD Homerun Duo / Plex Pass :)

  • how to add this file and where? I have also nexbox andriod tv player


    1. copy the file "a95x.txt" to "/storage/.config/rc_keymaps/"
    2. create "rc_maps.cfg" into "/storage/.config/" and write "meson-ir * a95x.txt" in it (without quotes)


    copy "remote.xml" to "/storage/.kodi/userdata/keymaps/" and "Lircmap.xml" to "/storage/.kodi/userdata/"


    I suggest you to use boot2k3's remote.xml file


    Once finished, reboot your box.


    Regards

    Edited once, last by adm ().

  • thanks, I know it is stupid question but I m simple user. How to create rc_maps.cfg?