[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

Boleh · December 23, 2017 at 6:33 AM

How do i abort "migrating add-ons"?

This started suddenly this morning when i powered up my box. I have 1.1.1 since a few days ago but this has only started today.

utiltiy · December 23, 2017 at 9:29 AM

Why?

I come from gendoo build, installed the 1.1.1 and after a reboot i must wait about 20 sec. for migrating addons and db before libreelec starts

**Wingman112** · December 23, 2017 at 9:51 AM

Quote from adamg

Apologies for this I will correct it shortly.

kszaqs thread would be best if you are using his build, NFS is supported out of the box with LE, you need either a NAS or linux box to run an NFS server.

NFS for Windows:

Networking Software for Windows

Allegro NFS for Windows

WinNFSd download | SourceForge.net

belaid38 · December 23, 2017 at 10:52 AM

GDPR-2 where is vdr ?

i need vdr 2.3.8

chessplayer · December 23, 2017 at 11:36 AM

GDPR-2 , did you by any chance forget to include the dvb drivers in your 1.1.2 build? At least when choosing the LibreELEC drivers addon, it complains that it cannot find any ...

GDPR-2 · December 23, 2017 at 11:54 AM

Quote from chessplayer

GDPR-2 , did you by any chance forget to include the dvb drivers in your 1.1.2 build? At least when choosing the LibreELEC drivers addon, it complains that it cannot find any ...

afl1 made some changes after 1.1.1 to the dvb modules, I will have to check it further, usually he deals with all things dvb

Quote from belaid38

GDPR-2 where is vdr ?

i need vdr 2.3.8

One of the vdr modules is broken in master so it can't be built just yet, CvH has made some changes to VDR which are due to go into master shortly, as soon as they do I will build the module

sinancetinkaya · December 23, 2017 at 12:06 PM

GDPR-2 afl1 I know that it's not a bug, it's a feature

I can fix this by setting display resolution to 1920x1080 but display resolution randomly goes back to 1280x720 by itself.

Code

##############################################
#                 LibreELEC                  #
#            https://libreelec.tv            #
##############################################

LibreELEC (community): devel-20171221221454-r27723-gf46dcd5 (S905.
rm)
LibreELEC:~ # paste /storage/.kodi/temp/kodi.log
http://sprunge.us/QORO
LibreELEC:~ # dmesg | paste
http://sprunge.us/AaSX
LibreELEC:~ #

Display More

**afl1** · December 23, 2017 at 12:31 PM

Quote from sinancetinkaya
GDPR-2 afl1 I know that it's not a bug, it's a feature

I can fix this by setting display resolution to 1920x1080 but display resolution randomly goes back to 1280x720 by itself.
Code
##############################################
#                 LibreELEC                  #
#            https://libreelec.tv            #
##############################################

LibreELEC (community): devel-20171221221454-r27723-gf46dcd5 (S905.
rm)
LibreELEC:~ # paste /storage/.kodi/temp/kodi.log
http://sprunge.us/QORO
LibreELEC:~ # dmesg | paste
http://sprunge.us/AaSX
LibreELEC:~ #
Display More

fw_setenv hdmimode 1080p60hz

**afl1** · December 23, 2017 at 12:34 PM

Quote from chessplayer

GDPR-2 , did you by any chance forget to include the dvb drivers in your 1.1.2 build? At least when choosing the LibreELEC drivers addon, it complains that it cannot find any ...

In 1.1.2 you have to install CrazyCat dvb driver addon:

driver.dvb.crazycat-9.0.0.zip

chessplayer · December 23, 2017 at 12:37 PM

Quote from afl1

In 1.1.2 you have to install CrazyCat dvb driver addon:

driver.dvb.crazycat-9.0.0.zip

Ok, I can certainly do that, but why introduce the CrazyCat and Hauppauge drivers in 1.1.1 and throw them out again in 1.1.2 (at least in the default install)?

**afl1** · December 23, 2017 at 1:12 PM

Quote from chessplayer

Ok, I can certainly do that, but why introduce the CrazyCat and Hauppauge drivers in 1.1.1 and throw them out again in 1.1.2 (at least in the default install)?

It was promo to introduce a new feature. Now we reduced size of the update image. You need driver addons install once and update them only when the new version is available. I removed dvb drivers from default as there are no updates and all drivers are covered in CrazyCat addon with the latest updates.

anotherwone · December 23, 2017 at 3:15 PM

GDPR-2

Do you know when we will be able to use the analog audio output on LE9? Currently I'm using a HDMI Audio Extractor to get the signal

Harmonia · December 23, 2017 at 4:21 PM

Just as information,

even in version 1.1.2 my Logitech remote not works with Genuine-SMK-Media-Center-USB-RC6-IR-Infrared-Remote-Receiver

1.1.2

Code

##############################################
#                 LibreELEC                  #
#            https://libreelec.tv            #
##############################################

LibreELEC (community): adamg-1.1.2 (S905.arm)
LibreELEC:~ # cat /proc/bus/input/devices
I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="aml_keypad"
P: Phys=keypad/input0
S: Sysfs=/devices/meson-remote.11/input/input0
U: Uniq=
H: Handlers=kbd mouse0 event0
B: PROP=0
B: EV=f
B: KEY=7fffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe
B: REL=103
B: ABS=0

I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="gpio_keypad"
P: Phys=gpio_keypad/input0
S: Sysfs=/devices/gpio_keypad.48/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=100003
B: KEY=100000 0 0 0

I: Bus=0010 Vendor=1b8e Product=0cec Version=0001
N: Name="cec_input"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=20000000 0 0 0 0 0 0 0 0 0 0 fc004 4c00 0 0 1 4 10300 51fa 40000801 1e1680 0 100000 10000ffc

LibreELEC:~ #

Display More

(for comparison) 1.1.1

Code

##############################################
#                 LibreELEC                  #
#            https://libreelec.tv            #
##############################################

LibreELEC (community): adamg-1.1.1 (S905.arm)
LibreELEC:~ # cat /proc/bus/input/devices
I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="aml_keypad"
P: Phys=keypad/input0
S: Sysfs=/devices/meson-remote.11/input/input0
U: Uniq=
H: Handlers=kbd mouse0 event0
B: PROP=0
B: EV=f
B: KEY=7fffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe
B: REL=103
B: ABS=0

I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="gpio_keypad"
P: Phys=gpio_keypad/input0
S: Sysfs=/devices/gpio_keypad.48/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=100003
B: KEY=100000 0 0 0

I: Bus=0010 Vendor=1b8e Product=0cec Version=0001
N: Name="cec_input"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=20000000 0 0 0 0 0 0 0 0 0 0 fc004 4c00 0 0 1 4 10300 51fa 40000801 1e1680 0 100000 10000ffc

I: Bus=0003 Vendor=0609 Product=031d Version=0000
N: Name="Media Center Ed. eHome Infrared Remote Transceiver (0609:031d)"P: Phys=usb-xhci-hcd.0.auto-2
S: Sysfs=/devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 0 200 10afc32e 2b76051 0 0 0 7 158000 4192 6801 9e9680 0 0 10004000
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (mceusb)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input4
U: Uniq=
H: Handlers=kbd mouse1 event4
B: PROP=0
B: EV=100017
B: KEY=30000 0 7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: REL=3
B: MSC=10

LibreELEC:~ #

Display More

and also for comparison the working release from kszaq

Code

##############################################
#                  LibreELEC                 #
#            https://libreelec.tv            #
##############################################

LibreELEC (community): 8.2.2.1 (S905.arm)
LibreELEC:~ # cat /proc/bus/input/devices
I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="aml_keypad"
P: Phys=keypad/input0
S: Sysfs=/devices/meson-remote.11/input/input0
U: Uniq=
H: Handlers=kbd mouse0 event0
B: PROP=0
B: EV=f
B: KEY=7fffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe
B: REL=103
B: ABS=0

I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="gpio_keypad"
P: Phys=gpio_keypad/input0
S: Sysfs=/devices/gpio_keypad.48/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=100003
B: KEY=100000 0 0 0

I: Bus=0010 Vendor=1b8e Product=0cec Version=0001
N: Name="cec_input"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=20000000 0 0 0 0 0 0 0 0 0 0 fc004 4c00 0 0 1 4 10300 51fa 40000801 1e1680 0 100000 10000ffc

I: Bus=0003 Vendor=0609 Product=031d Version=0000
N: Name="Media Center Ed. eHome Infrared Remote Transceiver (0609:031d)"
P: Phys=usb-xhci-hcd.0.auto-2
S: Sysfs=/devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 0 200 10afc32e 2b76051 0 0 0 7 158000 4192 6801 9e9680 0 0 10004000
B: MSC=10

LibreELEC:~ #

Display More

**afl1** · December 23, 2017 at 5:29 PM

Quote from Harmonia

Just as information,

even in version 1.1.2 my Logitech remote not works with Genuine-SMK-Media-Center-USB-RC6-IR-Infrared-Remote-Receiver

1.1.2

Code

##############################################
#                 LibreELEC                  #
#            https://libreelec.tv            #
##############################################

LibreELEC (community): adamg-1.1.2 (S905.arm)
LibreELEC:~ # cat /proc/bus/input/devices
I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="aml_keypad"
P: Phys=keypad/input0
S: Sysfs=/devices/meson-remote.11/input/input0
U: Uniq=
H: Handlers=kbd mouse0 event0
B: PROP=0
B: EV=f
B: KEY=7fffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe
B: REL=103
B: ABS=0

I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="gpio_keypad"
P: Phys=gpio_keypad/input0
S: Sysfs=/devices/gpio_keypad.48/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=100003
B: KEY=100000 0 0 0

I: Bus=0010 Vendor=1b8e Product=0cec Version=0001
N: Name="cec_input"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=20000000 0 0 0 0 0 0 0 0 0 0 fc004 4c00 0 0 1 4 10300 51fa 40000801 1e1680 0 100000 10000ffc

LibreELEC:~ #

Display More

(for comparison) 1.1.1

Code

##############################################
#                 LibreELEC                  #
#            https://libreelec.tv            #
##############################################

LibreELEC (community): adamg-1.1.1 (S905.arm)
LibreELEC:~ # cat /proc/bus/input/devices
I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="aml_keypad"
P: Phys=keypad/input0
S: Sysfs=/devices/meson-remote.11/input/input0
U: Uniq=
H: Handlers=kbd mouse0 event0
B: PROP=0
B: EV=f
B: KEY=7fffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe
B: REL=103
B: ABS=0

I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="gpio_keypad"
P: Phys=gpio_keypad/input0
S: Sysfs=/devices/gpio_keypad.48/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=100003
B: KEY=100000 0 0 0

I: Bus=0010 Vendor=1b8e Product=0cec Version=0001
N: Name="cec_input"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=20000000 0 0 0 0 0 0 0 0 0 0 fc004 4c00 0 0 1 4 10300 51fa 40000801 1e1680 0 100000 10000ffc

I: Bus=0003 Vendor=0609 Product=031d Version=0000
N: Name="Media Center Ed. eHome Infrared Remote Transceiver (0609:031d)"P: Phys=usb-xhci-hcd.0.auto-2
S: Sysfs=/devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 0 200 10afc32e 2b76051 0 0 0 7 158000 4192 6801 9e9680 0 0 10004000
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (mceusb)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input4
U: Uniq=
H: Handlers=kbd mouse1 event4
B: PROP=0
B: EV=100017
B: KEY=30000 0 7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: REL=3
B: MSC=10

LibreELEC:~ #

Display More

and also for comparison the working release from kszaq

Code

##############################################
#                  LibreELEC                 #
#            https://libreelec.tv            #
##############################################

LibreELEC (community): 8.2.2.1 (S905.arm)
LibreELEC:~ # cat /proc/bus/input/devices
I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="aml_keypad"
P: Phys=keypad/input0
S: Sysfs=/devices/meson-remote.11/input/input0
U: Uniq=
H: Handlers=kbd mouse0 event0
B: PROP=0
B: EV=f
B: KEY=7fffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe
B: REL=103
B: ABS=0

I: Bus=0010 Vendor=0001 Product=0001 Version=0100
N: Name="gpio_keypad"
P: Phys=gpio_keypad/input0
S: Sysfs=/devices/gpio_keypad.48/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=100003
B: KEY=100000 0 0 0

I: Bus=0010 Vendor=1b8e Product=0cec Version=0001
N: Name="cec_input"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=20000000 0 0 0 0 0 0 0 0 0 0 fc004 4c00 0 0 1 4 10300 51fa 40000801 1e1680 0 100000 10000ffc

I: Bus=0003 Vendor=0609 Product=031d Version=0000
N: Name="Media Center Ed. eHome Infrared Remote Transceiver (0609:031d)"
P: Phys=usb-xhci-hcd.0.auto-2
S: Sysfs=/devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 0 200 10afc32e 2b76051 0 0 0 7 158000 4192 6801 9e9680 0 0 10004000
B: MSC=10

LibreELEC:~ #

Display More

You have to install CrazyCat driver addon and enable it.

driver.dvb.crazycat-9.0.0.zip

Harmonia · December 23, 2017 at 5:50 PM

Wow,

Thank you, is working!

hyibin · December 23, 2017 at 10:53 PM

@adamg

Hi adamg, no DTS-X or Dolby Atmos sound out put after update from 1.1.1 to 1.1.2. Setting: pass-through. DTS-HD MA and Dolby TrueHD are fine.

GDPR-2 · December 23, 2017 at 11:24 PM

Quote from hyibin

@adamg

Hi adamg, no DTS-X or Dolby Atmos sound out put after update from 1.1.1 to 1.1.2. Setting: pass-through. DTS-HD MA and Dolby TrueHD are fine.

Are you sure it worked before because none of the changes made should be causing that.

hyibin · December 24, 2017 at 12:52 AM

Both DTS-X and Atmos worked before. They work when I switch back to 1.1.1.

[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

Similar Threads

[8.2.3.1] LibreELEC 8.2 for S905/S905X

[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

DVBViewer Buffing on Kodi 17.5