[8.90.6] LibreELEC 9.0 Alpha for S905/S912 devices

Quote from Brachiator

I installed LE on my internal last week and now I'm back on my SD card because the speed difference was negligible and loosing Android was not worth it.

You can have them both, you know...

Either by relocating certain folders (e.g. .kodi/userdata) to NAND/eMMc (/dev/data),

or like this:

[HOWTO] Boot from SD card, use internal memory for data

Quote from adamg

Both myself and kszaq with the help of Raybuntu have been submitting patches for the last week to have the S905 supported in LE officially rather than community builds.

That's a good news!

How I can activate analog video output. Is this possibe or is there no driver on LE 9, on LE8 it works fine. Need help.

Thanks in advance

I can't power on my Docooler M9S 2/16GB with the remote, but the remote functions normally after I force a power up (even the power button works to shut down, just won't power it up again).

I tried different remote configs, even tried making a new remote config (with instructions in another post). There is only one device tree that works with this box, the others won't boot.

I've done 9.0 on 4 different boxes, this was the only one I went straight from Android to Libreelec 9.0. Any ideas as to what I'm doing wrong?

Thanks,

Larry

Quote from afl1

In LE 9.0 repository is 'Tvheadend Server 4.3'.

If you can't see it push in Add-ons/Services left-arrow to open 'View options' and select 'Check for updates'.

Still showing tvheadend 4.2. How can I download it myself? Where is the LibreElec repository link?

Quote from sinancetinkaya

Still showing tvheadend 4.2. How can I download it myself? Where is the LibreElec repository link?

Index of /libreelec/addons/9.0/S905/arm/service.tvheadend42

afl1 This is driving me nutz. I'm scanning the same two muxes on each build (yours and LE 9.0 alpha)
Everything is same, dish, cable, weather condition. Even logs are identical f5tg9h6x

In your build I can see the channel is getting mapped.

But in LE 9.0 it says 0 services is mapped (I mapped all services)

What can cause this?

For TVH debugging use trace log for subsystem linuxdvb:

Traces - Tvheadend

Quote from afl1

For TVH debugging use trace log for subsystem linuxdvb:

Traces - Tvheadend

Pls, logs from both builds.

Quote from afl1

Pls, logs from both builds.

PS: your build's Tvheadend version is 4.2.3-20
Adamg's LE 9.0 tvheadend is 4.3 (the one in the repo)

The 12329H on Turksat 4A has occasional feeds. In TVH 4.3 those feeds are filtered.

Quote from afl1

afl1... with due respect kindly link your updated build for S905X.

Can it be installed in odroid c2? If it's possible, what device tree I have to choose?

Quote from afl1

The 12329H on Turksat 4A has occasional feeds. In TVH 4.3 those feeds are filtered.

Transponder 12329H has a popular TV channel, is there anything I can do to solve this issue?

Quote from larryf

I can't power on my Docooler M9S 2/16GB with the remote, but the remote functions normally after I force a power up (even the power button works to shut down, just won't power it up again).

I tried different remote configs, even tried making a new remote config (with instructions in another post). There is only one device tree that works with this box, the others won't boot.

I've done 9.0 on 4 different boxes, this was the only one I went straight from Android to Libreelec 9.0. Any ideas as to what I'm doing wrong?

Thanks,

Larry

Mhh sounds like a remote Problem. In my opinion, if the box is out, the remote.config has nothing to do with it.

Power on is IR <-> Hardware only. It always works on my box, even when the remote doesn't work in the System of LibreElec.

Quote from sinancetinkaya

Transponder 12329H has a popular TV channel, is there anything I can do to solve this issue?

Greetings,

Does this channel show on Android side, Sinan?

Best regards...