[8.2.3.1] LibreELEC 8.2 for S905/S905X

  • why reduce from 12 to 10, he otherwise plays the 10s wrong?

    No, 10 bit plays fine with 12 bit settings ;)

    -2re


    8.90 ⇒ MeCool KI Pro ⇒ Onkyo TX-NR656 ⇒ SAMSUNG 65"LED/UHD/PQ1300/T2CS

    LG BP50NB40 USB Blu-ray


  • Are there TV's with 12 bit panels? I thought most panels were 10 bit. My 55" LG is 10 bit (I think).

    If it ain't broken: break it, fix it, repeat

  • Greetings,


    Mecool K1 Pro and WeTek Play 2 did not work stand-by.

    But version 8.1.7 is a legend.
    Thanks.


    Best regards...

  • Suspend is not working on my memobox t95n mini m8spro.

    It goes to sleep, it just doesn't wake properly. Light turns blue, but no signal or ping. It's fast enough to do a full powerdown and poweron anyway.


    Not a complaint, just thought I'd mention it. I'd be happy to share logs, should anyone want them.

    If it ain't broken: break it, fix it, repeat

  • Thanks for the update kszaq

    Just bought a couple of these exact bt remotes and existing .evmap wasnt covering all buttons. Still using 7.0.3.12 for its livetv performance, but i will be trying this one. Awesome job as always!

    'You're like a child who wanders into the middle of a movie and wants to know -..' ~ Walter Sobchak (The Big Lebowski)

  • Just an observation in 8.1.7:

    At first the only difference between 1080 and upscaling to 2160 was that the color saturation on my TV has to be about 10 clicks higher without upscaling. But after playing some HQ movies I've came to the conclusion that; "things look the same, but don't feel the same.".

    So i did some more testing, and found that if i enable noise reduction on my TV, than i get some miner color bandings on 1080 but not on 2160. The only explanation I can come up with, is that some color dithering is consider as "noise", and when upscaling the image, color enhancement/dithering is applied after upscaling, to avoid the dithering itself to be upscaled.


    So letting the box do the upscaleing makes me feel better. ;)


    Look under his eye at pos. 0:35 when he's threading the needle.

    testflick


    -edit-: What i'm trying to say is that a dither'd upscale is better than an upscaled dither. ;)

    -2re


    8.90 ⇒ MeCool KI Pro ⇒ Onkyo TX-NR656 ⇒ SAMSUNG 65"LED/UHD/PQ1300/T2CS

    LG BP50NB40 USB Blu-ray


    Edited once, last by 2re ().

  • kszaq Is the wifi issue fixed in 8.1.7?

    Please test it on your box, I am unable to reproduce the issue on any of my boxes. There is a small change in the driver that may fix it. I did not revert the commit fully as it makes my WiFi unusable after some time in standby.


    If 8.1.7 doesn't work for you, I am preparing a testing build with completely new driver - need to test if it works at all on my boxes.

  • Please test it on your box, I am unable to reproduce the issue on any of my boxes. There is a small change in the driver that may fix it. I did not revert the commit fully as it makes my WiFi unusable after some time in standby.


    If 8.1.7 doesn't work for you, I am preparing a testing build with completely new driver - need to test if it works at all on my boxes.

    Just installed 8.1.7 and wifi is working flawless again!! Thank you very much.

  • Updated last night to 8.1.7 on my Minix U1, so far so good!

    Thanks kszaq!

    Minix Neo U1, S905 chipset, 2GB/16GB, Dual Boot Libreelec / Android 5.1 lollipop, Samsung UHS-1 32GB Micro SDHC Memory card

  • No, 10 bit plays fine with 12 bit settings ;)

    By default what is enable?
    8, 10 or 12?

    - Box Android Mini M8S II (Amlogic S905X, 2GB RAM, 8GB ROM)
    - Ugreen USB Ethernet Adapter Usb 3.0 2.0 [ASIX AX88179 Chipset]
    - LibreELEC 8.2 (Nougat Kernel) builds aimed at devices based on Amlogic S905/S905X SoC.

  • By default what is enable?
    8, 10 or 12?

    420, 8bit

    -2re


    8.90 ⇒ MeCool KI Pro ⇒ Onkyo TX-NR656 ⇒ SAMSUNG 65"LED/UHD/PQ1300/T2CS

    LG BP50NB40 USB Blu-ray