[NOT Detected] Samsung EVO 960 M.2 SSD by LibreELEC on NUC6i7KYK

Lama · March 29, 2017 at 3:48 PM

I just loaded Live and found my SSD is Not detected by the OS.

Samsung EVO 960 M.2 SSD on Intel NUC6i7KYK. This SSD for not detected Windows either till I added the specific drivers in setup.

Read speed is 3200MB/s but it will be a shame if M.2 is Not detected in future.

**Klojum** · March 29, 2017 at 8:44 PM Official Post

Does the M.2 SSD already have one or more formatted partitions?

If SSH'ing into the NUC works, give the returned URLs for:

Code

blkid | pastebinit
mount | pastebinit
dmesg | pastebinit

Lama · March 31, 2017 at 6:07 AM

Quote from Klojum
Does the M.2 SSD already have one or more formatted partitions?

If SSH'ing into the NUC works, give the returned URLs for:
Code
blkid | pastebinit
mount | pastebinit
dmesg | pastebinit

Yes.. 2 partitions (OS and Storage with NTFS)

Did those commands,.. looked ok (assuming it uploaded some telemetry data?) ?

Edit: BTW, LibreELEC didn't return from Suspend (had to power down manually).

vitorp07 · March 31, 2017 at 6:26 AM

After doing each of those 3 commands via SSH it will give you a URL(link),
you have to take those 3 URLs(links) and copy/paste here.

Lama · March 31, 2017 at 6:39 AM

O crap,.. thanks.

Here are those links

SPgQ

RBRj

NXLc

**Klojum** · March 31, 2017 at 7:53 AM Official Post

Linux tends to not mount partitions with disk errors on them, or partitions from systems that are in suspend/hibernation mode.

So please double-check. Also, if you haven't yet, run the installer itself and see if the M.2 partition(s) are visible. No need to go forward with the installation yet.

Lama · March 31, 2017 at 11:06 AM

Quote from Klojum

Linux tends to not mount partitions with disk errors on them, or partitions from systems that are in suspend/hibernation mode.

So please double-check. Also, if you haven't yet, run the installer itself and see if the M.2 partition(s) are visible. No need to go forward with the installation yet.

Nope,.. don't have any errors in my file system.

Ok, installer sees my M.2 SSD (as whole disk, no partition options yet).

Edit: ...and it's Not like M.2 disappears after putting LibreElec on suspend, M.2 is simply Not available straight after Live mode is booted. After suspend, display remains Off (maybe, your SSH maybe responding?)

**vpeter** · March 31, 2017 at 11:26 AM

Maybe nvme support is missing here?

Lama · March 31, 2017 at 3:11 PM

So,.. should I expect missing feature in next version?

Lama · April 29, 2017 at 7:38 AM

I can only hope next version of Kodi 18 along Live run of LibreElec can detect this SSD ?

**Iridium** · April 29, 2017 at 1:13 PM Official Post

Lama Not a lot of help to you, but I'm running Ubuntu 16.04 off of the same M2 SSD and it works a dream -> 3.1GB/s read rate, so Linux/Debian does support it. Maybe something small is missing from LE?.

I'm guessing the Bios has detected it.

**chewitt** · April 29, 2017 at 5:29 PM Official Post

Live mode appears to be missing support for nvme* device as vpeter indicated. That can be fixed, but the easy solution is to install to the SSD instead of running in Live mode as the install script supports nvme devices already. NB: LE installs to the entire disk not a partition. That's deliberate and will not change so if you're trying to do some kind of multi-partition/boot arrangement you'll need to boot Ubuntu or similar to create the partitions required for LE to run from and do a manual install from there.