[8.2.2.3] LibreELEC 8.2 for S912
-
kszaq -
March 3, 2017 at 7:18 PM -
Thread is Unresolved
-
-
Excuse me, do you know how to return to the default sound configuration? It's that the AV output has disappeared
-
Is there any command via SSH to see the actual output (8bit / 10bit / 12bit)?
It's not that I don't believe my Minix U9 outputs 10 bit - but my TV gives very little info about it and my AVR (that did this before) is 1080p / 8bit only.
So it would be nice to have these infos via SSH.
-
Is there any command via SSH to see the actual output (8bit / 10bit / 12bit)?
It's not that I don't believe my Minix U9 outputs 10 bit - but my TV gives very little info about it and my AVR (that did this before) is 1080p / 8bit only.
So it would be nice to have these infos via SSH.
Auto frame rate switching & dynamic range matching - 4K (HDR10) capable Hardware
-
thank you - but as far as I can see, the commands used just show, what the display is capable of, not what the box is actual outputting?
-
echo '444,10bit' > /sys/class/amhdmitx/amhdmitx0/attr - This command will set the box to output 10bit. Change will take affect after resolution or refresh rate change.
cat /sys/class/amhdmitx/amhdmitx0/attr - Will display your current setting. (Empty = 8 bit).
-
my tv lg oled 55c7 supports 1080p120Hz.
please tell me how to add 120Hz to the menu KIII pro?
I found this is 120hz supported?
is this correct or not?
Thank you
-
echo '444,10bit' > /sys/class/amhdmitx/amhdmitx0/attr - This command will set the box to output 10bit. Change will take affect after resolution or refresh rate change.
cat /sys/class/amhdmitx/amhdmitx0/attr - Will display your current setting. (Empty = 8 bit).
Thank you The Coolest !
-
-
Why do you need 120Hz out of a TV box? I don't even know if it's capable of that.
Well let's try
Tell me how?
100hz and 120hz
-
Code
echo 1080p120hz > /sys/class/display/mode -
-
Thank you
box can not 120Hz
120hz is done by your tv by doubling the input refresh rate and not by the box, it's like Tv's with 1200hz refresh rate.
You really need to quit with trying commands you have absolutely no understanding of.
-
There are some models that can accept 1080P @ 120Hz signal (like from a PC).
I have a Vizio M60-D1, had a Vizio M55-C2 and have a LG B7, which is also capable of real 120Hz input.
The 9 series Sony models from the last few years can also accept 1080@120Hz.
-
Well let's try
Tell me how?
100hz and 120hz
From a video playback perspective there is NO normal source video content shot at 100 or 120fps to even output at those frame rates.
Conclusion.
There is no support on any normal media players for those video playback frame rates.
-
Is it a known issue, that progressive tv streams (like in germany ARD HD or ZDF HD) do not work correctly?
I get very heavy stuttering and no audio?
Is it a kernel / hardware decoding issue?
-
Is it a known issue, that progressive tv streams (like in germany ARD HD or ZDF HD) do not work correctly?
It´s not a bug - It´s a feature.
Many posts in this forum about stuttering etc.
Don´t think it´s a kernel issue.
Which addon do You use ?
-
I'm using DVBViewer addon, the one that comes with the latest stable krypton release.
