Hi,
I've installed LibreELEC 8.0.0 on an old Leveno Thinkpad T500 that fails to start Xorg Server in 50% booting. The reason is that the notebook has two graphic cards (intel and AMD). If it detects the AMD graphic card first, it fails to boot and fails to start Xorg Server. There are problems detecting the correct AMD graphic card, that's why it fails loading the corresponding driver through xorg-radeon.conf:
Code
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV635/M86 [Mobility Radeon HD 3650] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: radeon
If LibreELEC detects the Intel graphic card first, it chooses xorg-i915.conf for configuration and LibreELEC is running.
Full lspci -v:
Code
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo Mobile 4 Series Chipset Memory Controller Hub
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: bff00000-bfffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Capabilities: [88] Subsystem: Lenovo Mobile 4 Series Chipset PCI Express Graphics Port
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [a0] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [140] Root Complex Link
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Lenovo Mobile 4 Series Chipset Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at fc000000 (64-bit, non-prefetchable) [size=4M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 1800 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 3
Kernel driver in use: i915
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo Mobile 4 Series Chipset MEI Controller
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at fc626800 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) (prog-if 02 [16550])
Subsystem: Lenovo Mobile 4 Series Chipset AMT SOL Redirection
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
I/O ports at 1830 [size=8]
Memory at fc624000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo 82567LM Gigabit Network Connection
Flags: bus master, fast devsel, latency 0, IRQ 31
Memory at fc600000 (32-bit, non-prefetchable) [size=128K]
Memory at fc625000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 1840 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] PCI Advanced Features
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 1860 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1880 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at 18a0 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo 82801I (ICH9 Family) USB2 EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fc626c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo 82801I (ICH9 Family) HD Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at fc620000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 7c000000-7c1fffff
Prefetchable memory behind bridge: 000000007c200000-000000007c3fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Lenovo 82801I (ICH9 Family) PCI Express Port 1
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f4200000-f42fffff
Prefetchable memory behind bridge: 000000007c400000-000000007c5fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Lenovo 82801I (ICH9 Family) PCI Express Port 2
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 27
Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4100000-00000000f41fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Lenovo 82801I (ICH9 Family) PCI Express Port 5
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 18c0 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 18e0 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 1c00 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo 82801I (ICH9 Family) USB2 EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at fc627000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00005000-00008fff
Memory behind bridge: f4300000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Capabilities: [50] Subsystem: Lenovo 82801 Mobile PCI Bridge
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo ICH9M-E LPC Interface Controller
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 30
I/O ports at 1c48 [size=8]
I/O ports at 183c [size=4]
I/O ports at 1c40 [size=8]
I/O ports at 1838 [size=4]
I/O ports at 1c20 [size=32]
Memory at fc626000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo 82801I (ICH9 Family) SMBus Controller
Flags: medium devsel, IRQ 23
Memory at fc627400 (64-bit, non-prefetchable) [size=256]
I/O ports at 1c60 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV635/M86 [Mobility Radeon HD 3650] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: radeon
03:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
Subsystem: Intel Corporation Ultimate N WiFi Link 5300
Flags: bus master, fast devsel, latency 0, IRQ 33
Memory at f4200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-16-ea-ff-ff-e6-46-d6
Kernel driver in use: iwlwifi
Kernel modules: wl, iwlwifi
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
Subsystem: Lenovo RL5c476 II (ThinkPad R61)
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at f4300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: f0000000-f3ffffff (prefetchable)
Memory window 1: 80000000-83ffffff
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001
Capabilities: [dc] Power Management version 2
15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
Subsystem: Lenovo R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (ThinkPad W500)
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at f4301000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Kernel driver in use: sdhci-pci
15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 11)
Subsystem: Lenovo R5C843 MMC Host Controller
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at f4301400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Kernel driver in use: sdhci-pci
15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
Subsystem: Lenovo R5C592 Memory Stick Bus Host Adapter (ThinkPad T61)
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at f4301800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
Subsystem: Lenovo xD-Picture Card Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at f4301c00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2Here is the log file /var/log/Xorg.0.log when LibreELEC detects AMD graphic card first and fails to start:
Code
_XSERVTransTransNoListen: unable to find transport: tcp
Failed to disable listen for tcp transport_XSERVTransTransNoListen: unable to find transport: tcp
Failed to disable listen for tcp transport[1799917.751]
X.Org X Server 1.19.1
Release Date: 2017-01-11
[1799917.751] X Protocol Version 11, Revision 0
[1799917.751] Build Operating System: Linux 4.4.0-59-generic x86_64 LibreELEC.tv
[1799917.751] Current Operating System: Linux kronos 4.9.8 #1 SMP Sat Feb 18 05:05:56 GMT 2017 x86_64
[1799917.751] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage quiet
[1799917.751] Build Date: 17 February 2017 03:20:32PM
[1799917.751]
[1799917.751] Current version of pixman: 0.34.0
[1799917.751] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[1799917.751] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[1799917.751] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 23 14:03:22 2017
[1799917.751] (++) Using config file: "/etc/X11/xorg-radeon.conf"
[1799917.751] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[1799917.752] (==) No Layout section. Using the first Screen section.
[1799917.752] (==) No screen section available. Using defaults.
[1799917.752] (**) |-->Screen "Default Screen Section" (0)
[1799917.752] (**) | |-->Monitor "<default monitor>"
[1799917.752] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[1799917.752] (**) | |-->Device "AMD Graphics"
[1799917.752] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[1799917.752] (==) Automatically adding devices
[1799917.752] (==) Automatically enabling devices
[1799917.752] (==) Automatically adding GPU devices
[1799917.752] (==) Max clients allowed: 256, resource mask: 0x1fffff
[1799917.752] (==) FontPath set to:
/usr/share/fonts/misc,
built-ins
[1799917.752] (==) ModulePath set to "/usr/lib/xorg/modules"
[1799917.752] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[1799917.752] (II) Loader magic: 0x5c6880
[1799917.752] (II) Module ABI versions:
[1799917.752] X.Org ANSI C Emulation: 0.4
[1799917.752] X.Org Video Driver: 23.0
[1799917.752] X.Org XInput driver : 24.1
[1799917.752] X.Org Server Extension : 10.0
[1799917.753] (II) xfree86: Adding drm device (/dev/dri/card0)
[1799918.893] (II) xfree86: Adding drm device (/dev/dri/card1)
[1799918.909] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:2115 rev 7, Mem @ 0xfc000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/131072
[1799918.909] (--) PCI: (0:1:0:0) 1002:9591:17aa:2116 rev 0, Mem @ 0xc0000000/268435456, 0xbfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[1799918.909] (II) LoadModule: "glx"
[1799918.910] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[1799918.912] (II) Module glx: vendor="X.Org Foundation"
[1799918.912] compiled for 1.19.1, module version = 1.0.0
[1799918.912] ABI class: X.Org Server Extension, version 10.0
[1799918.912] (II) LoadModule: "radeon"
[1799918.912] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[1799918.913] (II) Module radeon: vendor="X.Org Foundation"
[1799918.913] compiled for 1.19.1, module version = 7.8.0
[1799918.913] Module class: X.Org Video Driver
[1799918.913] ABI class: X.Org Video Driver, version 23.0
[1799918.913] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
ATI Radeon 9800PRO, ATI Radeon 9800XT,
ATI Radeon Mobility 9600/9700 (M10/M11),
ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
ATI FireGL V3350, ATI Mobility Radeon X1450,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
ATI FireGL V3400, ATI Mobility FireGL V5250,
ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
MULLINS, KAVERI, HAWAII
[1799918.914] (++) using VT number 1
[1799918.915] (II) [KMS] Kernel modesetting enabled.
[1799918.915] (EE) No devices detected.
[1799918.915] (EE)
Fatal server error:
[1799918.915] (EE) no screens found(EE)
[1799918.915] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[1799918.915] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[1799918.915] (EE)
[1799918.967] (EE) Server terminated with error (1). Closing log file.Here is the log file /var/log/Xorg.0.log when LibreELEC detects Intel graphic card first and starts LibreELEC without problems:
Code
_XSERVTransTransNoListen: unable to find transport: tcp
Failed to disable listen for tcp transport_XSERVTransTransNoListen: unable to find transport: tcp
Failed to disable listen for tcp transport[1800303.824]
X.Org X Server 1.19.1
Release Date: 2017-01-11
[1800303.824] X Protocol Version 11, Revision 0
[1800303.824] Build Operating System: Linux 4.4.0-59-generic x86_64 LibreELEC.tv
[1800303.824] Current Operating System: Linux kronos 4.9.8 #1 SMP Sat Feb 18 05:05:56 GMT 2017 x86_64
[1800303.824] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage quiet
[1800303.824] Build Date: 17 February 2017 03:20:32PM
[1800303.824]
[1800303.824] Current version of pixman: 0.34.0
[1800303.824] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[1800303.824] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[1800303.824] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 23 14:09:48 2017
[1800303.824] (++) Using config file: "/etc/X11/xorg-i915.conf"
[1800303.824] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[1800303.828] (==) No Layout section. Using the first Screen section.
[1800303.828] (==) No screen section available. Using defaults.
[1800303.828] (**) |-->Screen "Default Screen Section" (0)
[1800303.828] (**) | |-->Monitor "<default monitor>"
[1800303.828] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[1800303.828] (**) | |-->Device "Device0"
[1800303.828] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[1800303.828] (==) Automatically adding devices
[1800303.828] (==) Automatically enabling devices
[1800303.828] (==) Automatically adding GPU devices
[1800303.828] (==) Max clients allowed: 256, resource mask: 0x1fffff
[1800303.828] (==) FontPath set to:
/usr/share/fonts/misc,
built-ins
[1800303.828] (==) ModulePath set to "/usr/lib/xorg/modules"
[1800303.828] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[1800303.828] (II) Loader magic: 0x5c6880
[1800303.828] (II) Module ABI versions:
[1800303.828] X.Org ANSI C Emulation: 0.4
[1800303.828] X.Org Video Driver: 23.0
[1800303.828] X.Org XInput driver : 24.1
[1800303.828] X.Org Server Extension : 10.0
[1800303.829] (II) xfree86: Adding drm device (/dev/dri/card0)
[1800303.829] (II) xfree86: Adding drm device (/dev/dri/card1)
[1800303.837] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:2115 rev 7, Mem @ 0xfc000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/131072
[1800303.837] (--) PCI: (0:1:0:0) 1002:9591:17aa:2116 rev 0, Mem @ 0xc0000000/268435456, 0xbfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[1800303.837] (II) LoadModule: "glx"
[1800303.838] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[1800303.867] (II) Module glx: vendor="X.Org Foundation"
[1800303.867] compiled for 1.19.1, module version = 1.0.0
[1800303.867] ABI class: X.Org Server Extension, version 10.0
[1800303.867] (II) LoadModule: "intel"
[1800303.867] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[1800303.873] (II) Module intel: vendor="X.Org Foundation"
[1800303.873] compiled for 1.19.1, module version = 2.99.917
[1800303.873] Module class: X.Org Video Driver
[1800303.873] ABI class: X.Org Video Driver, version 23.0
[1800303.873] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[1800303.873] (II) intel: Driver for Intel(R) HD Graphics
[1800303.873] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[1800303.873] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[1800303.873] (++) using VT number 1
[1800303.878] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[1800303.880] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[1800303.880] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1; using a maximum of 2 threads
[1800303.880] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[1800303.880] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[1800303.880] (==) intel(0): RGB weight 888
[1800303.880] (==) intel(0): Default visual is TrueColor
[1800303.880] (**) intel(0): Option "TripleBuffer" "false"
[1800303.880] (**) intel(0): Option "TearFree" "false"
[1800303.880] (II) intel(0): Output LVDS2 has no monitor section
[1800303.880] (II) intel(0): Enabled output LVDS2
[1800303.880] (II) intel(0): Output VGA2 has no monitor section
[1800303.880] (II) intel(0): Enabled output VGA2
[1800303.880] (II) intel(0): Output DP2 has no monitor section
[1800303.880] (II) intel(0): Enabled output DP2
[1800303.880] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[1800303.880] (II) intel(0): Output VIRTUAL1 has no monitor section
[1800303.880] (II) intel(0): Enabled output VIRTUAL1
[1800303.880] (--) intel(0): Output LVDS2 using initial mode 1680x1050 on pipe 1
[1800303.880] (**) intel(0): TearFree disabled
[1800303.880] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[1800303.880] (==) intel(0): DPI set to (96, 96)
[1800303.880] (II) Loading sub module "dri3"
[1800303.880] (II) LoadModule: "dri3"
[1800303.880] (II) Module "dri3" already built-in
[1800303.880] (II) Loading sub module "dri2"
[1800303.880] (II) LoadModule: "dri2"
[1800303.880] (II) Module "dri2" already built-in
[1800303.880] (II) Loading sub module "present"
[1800303.880] (II) LoadModule: "present"
[1800303.880] (II) Module "present" already built-in
[1800303.880] (==) Depth 24 pixmap format is 32 bpp
[1800303.884] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend
[1800303.884] (==) intel(0): Backing store enabled
[1800303.884] (==) intel(0): Silken mouse enabled
[1800303.884] (II) intel(0): HW Cursor enabled
[1800303.884] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[1800303.885] (==) intel(0): DPMS enabled
[1800303.885] (==) intel(0): Display hotplug detection enabled
[1800303.885] (II) intel(0): [DRI2] Setup complete
[1800303.885] (II) intel(0): [DRI2] DRI driver: i965
[1800303.885] (II) intel(0): [DRI2] VDPAU driver: va_gl
[1800303.885] (II) intel(0): direct rendering: DRI2 enabled
[1800303.885] (II) intel(0): hardware support for Present enabled
[1800303.885] (--) RandR disabled
[1800303.950] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[1800303.950] (II) AIGLX: enabled GLX_ARB_create_context
[1800303.950] (II) AIGLX: enabled GLX_ARB_create_context_profile
[1800303.950] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[1800303.950] (II) AIGLX: enabled GLX_INTEL_swap_event
[1800303.950] (II) AIGLX: enabled GLX_SGI_swap_control
[1800303.950] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[1800303.950] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[1800303.950] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[1800303.950] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[1800303.950] (II) AIGLX: Loaded and initialized i965
[1800303.950] (II) GLX: Initialized DRI2 GL provider for screen 0
[1800303.958] (II) intel(0): switch to mode [email protected] on LVDS2 using pipe 1, position (0, 0), rotation normal, reflection none
[1800303.967] (II) intel(0): Setting screen physical size to 444 x 277
[1800304.018] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[1800304.018] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[1800304.018] (II) LoadModule: "evdev"
[1800304.018] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[1800304.021] (II) Module evdev: vendor="X.Org Foundation"
[1800304.021] compiled for 1.19.1, module version = 2.10.4
[1800304.021] Module class: X.Org XInput Driver
[1800304.021] ABI class: X.Org XInput driver, version 24.1
[1800304.021] (II) Using input driver 'evdev' for 'Power Button'
[1800304.021] (**) Power Button: always reports core events
[1800304.021] (**) evdev: Power Button: Device: "/dev/input/event2"
[1800304.021] (--) evdev: Power Button: Vendor 0 Product 0x1
[1800304.021] (--) evdev: Power Button: Found keys
[1800304.021] (II) evdev: Power Button: Configuring as keyboard
[1800304.021] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[1800304.021] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[1800304.021] (**) Option "xkb_rules" "evdev"
[1800304.021] (**) Option "xkb_model" "pc105"
[1800304.021] (**) Option "xkb_layout" "de,us"
[1800304.021] (**) Option "xkb_variant" ","
[1800304.021] (**) Option "xkb_options" "grp:alt_shift_toggle"
[1800304.057] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[1800304.057] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[1800304.057] (II) Using input driver 'evdev' for 'Video Bus'
[1800304.057] (**) Video Bus: always reports core events
[1800304.057] (**) evdev: Video Bus: Device: "/dev/input/event3"
[1800304.057] (--) evdev: Video Bus: Vendor 0 Product 0x6
[1800304.057] (--) evdev: Video Bus: Found keys
[1800304.057] (II) evdev: Video Bus: Configuring as keyboard
[1800304.057] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[1800304.057] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[1800304.057] (**) Option "xkb_rules" "evdev"
[1800304.057] (**) Option "xkb_model" "pc105"
[1800304.057] (**) Option "xkb_layout" "de,us"
[1800304.057] (**) Option "xkb_variant" ","
[1800304.057] (**) Option "xkb_options" "grp:alt_shift_toggle"
[1800304.057] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[1800304.057] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[1800304.057] (II) Using input driver 'evdev' for 'Video Bus'
[1800304.057] (**) Video Bus: always reports core events
[1800304.057] (**) evdev: Video Bus: Device: "/dev/input/event4"
[1800304.058] (--) evdev: Video Bus: Vendor 0 Product 0x6
[1800304.058] (--) evdev: Video Bus: Found keys
[1800304.058] (II) evdev: Video Bus: Configuring as keyboard
[1800304.058] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input4/event4"
[1800304.058] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[1800304.058] (**) Option "xkb_rules" "evdev"
[1800304.058] (**) Option "xkb_model" "pc105"
[1800304.058] (**) Option "xkb_layout" "de,us"
[1800304.058] (**) Option "xkb_variant" ","
[1800304.058] (**) Option "xkb_options" "grp:alt_shift_toggle"
[1800304.058] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[1800304.058] (II) No input driver specified, ignoring this device.
[1800304.058] (II) This device may have been added with another device file.
[1800304.059] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[1800304.059] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[1800304.059] (II) Using input driver 'evdev' for 'Sleep Button'
[1800304.059] (**) Sleep Button: always reports core events
[1800304.059] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[1800304.059] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[1800304.059] (--) evdev: Sleep Button: Found keys
[1800304.059] (II) evdev: Sleep Button: Configuring as keyboard
[1800304.059] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[1800304.059] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[1800304.059] (**) Option "xkb_rules" "evdev"
[1800304.059] (**) Option "xkb_model" "pc105"
[1800304.059] (**) Option "xkb_layout" "de,us"
[1800304.059] (**) Option "xkb_variant" ","
[1800304.059] (**) Option "xkb_options" "grp:alt_shift_toggle"
[1800304.060] (II) config/udev: Adding input device MLK USB Multi-Smart Mouse (/dev/input/event6)
[1800304.060] (**) MLK USB Multi-Smart Mouse: Applying InputClass "evdev pointer catchall"
[1800304.060] (**) MLK USB Multi-Smart Mouse: Applying InputClass "evdev keyboard catchall"
[1800304.060] (II) Using input driver 'evdev' for 'MLK USB Multi-Smart Mouse'
[1800304.060] (**) MLK USB Multi-Smart Mouse: always reports core events
[1800304.060] (**) evdev: MLK USB Multi-Smart Mouse: Device: "/dev/input/event6"
[1800304.060] (--) evdev: MLK USB Multi-Smart Mouse: Vendor 0x4fc Product 0x801
[1800304.060] (--) evdev: MLK USB Multi-Smart Mouse: Found 16 mouse buttons
[1800304.060] (--) evdev: MLK USB Multi-Smart Mouse: Found scroll wheel(s)
[1800304.060] (--) evdev: MLK USB Multi-Smart Mouse: Found relative axes
[1800304.060] (--) evdev: MLK USB Multi-Smart Mouse: Found x and y relative axes
[1800304.060] (--) evdev: MLK USB Multi-Smart Mouse: Found absolute axes
[1800304.060] (II) evdev: MLK USB Multi-Smart Mouse: Forcing absolute x/y axes to exist.
[1800304.060] (--) evdev: MLK USB Multi-Smart Mouse: Found keys
[1800304.060] (II) evdev: MLK USB Multi-Smart Mouse: Configuring as mouse
[1800304.060] (II) evdev: MLK USB Multi-Smart Mouse: Configuring as keyboard
[1800304.060] (II) evdev: MLK USB Multi-Smart Mouse: Adding scrollwheel support
[1800304.060] (**) evdev: MLK USB Multi-Smart Mouse: YAxisMapping: buttons 4 and 5
[1800304.060] (**) evdev: MLK USB Multi-Smart Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1800304.060] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:04FC:0801.0001/input/input8/event6"
[1800304.060] (II) XINPUT: Adding extended input device "MLK USB Multi-Smart Mouse" (type: KEYBOARD, id 10)
[1800304.060] (**) Option "xkb_rules" "evdev"
[1800304.060] (**) Option "xkb_model" "pc105"
[1800304.060] (**) Option "xkb_layout" "de,us"
[1800304.060] (**) Option "xkb_variant" ","
[1800304.060] (**) Option "xkb_options" "grp:alt_shift_toggle"
[1800304.061] (II) evdev: MLK USB Multi-Smart Mouse: initialized for relative axes.
[1800304.061] (WW) evdev: MLK USB Multi-Smart Mouse: ignoring absolute axes.
[1800304.061] (**) MLK USB Multi-Smart Mouse: (accel) keeping acceleration scheme 1
[1800304.061] (**) MLK USB Multi-Smart Mouse: (accel) acceleration profile 0
[1800304.061] (**) MLK USB Multi-Smart Mouse: (accel) acceleration factor: 2.000
[1800304.061] (**) MLK USB Multi-Smart Mouse: (accel) acceleration threshold: 4
[1800304.062] (II) config/udev: Adding input device MLK USB Multi-Smart Mouse (/dev/input/mouse0)
[1800304.062] (II) No input driver specified, ignoring this device.
[1800304.062] (II) This device may have been added with another device file.
[1800304.062] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[1800304.062] (II) No input driver specified, ignoring this device.
[1800304.062] (II) This device may have been added with another device file.
[1800304.062] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[1800304.062] (II) No input driver specified, ignoring this device.
[1800304.062] (II) This device may have been added with another device file.
[1800304.062] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event11)
[1800304.063] (II) No input driver specified, ignoring this device.
[1800304.063] (II) This device may have been added with another device file.
[1800304.063] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event12)
[1800304.063] (II) No input driver specified, ignoring this device.
[1800304.063] (II) This device may have been added with another device file.
[1800304.063] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[1800304.063] (II) No input driver specified, ignoring this device.
[1800304.063] (II) This device may have been added with another device file.
[1800304.064] (II) config/udev: Adding input device X10 Wireless Technology Inc USB Receiver (/dev/input/event14)
[1800304.064] (**) X10 Wireless Technology Inc USB Receiver: Applying InputClass "evdev keyboard catchall"
[1800304.064] (II) Using input driver 'evdev' for 'X10 Wireless Technology Inc USB Receiver'
[1800304.064] (**) X10 Wireless Technology Inc USB Receiver: always reports core events
[1800304.064] (**) evdev: X10 Wireless Technology Inc USB Receiver: Device: "/dev/input/event14"
[1800304.064] (--) evdev: X10 Wireless Technology Inc USB Receiver: Vendor 0xbc7 Product 0x6
[1800304.064] (--) evdev: X10 Wireless Technology Inc USB Receiver: Found keys
[1800304.064] (II) evdev: X10 Wireless Technology Inc USB Receiver: Configuring as keyboard
[1800304.064] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/rc/rc0/input16/event14"
[1800304.064] (II) XINPUT: Adding extended input device "X10 Wireless Technology Inc USB Receiver" (type: KEYBOARD, id 11)
[1800304.064] (**) Option "xkb_rules" "evdev"
[1800304.064] (**) Option "xkb_model" "pc105"
[1800304.064] (**) Option "xkb_layout" "de,us"
[1800304.064] (**) Option "xkb_variant" ","
[1800304.064] (**) Option "xkb_options" "grp:alt_shift_toggle"
[1800304.065] (II) config/udev: Adding input device DVBSky S960/S860 (/dev/input/event15)
[1800304.065] (**) DVBSky S960/S860: Applying InputClass "evdev keyboard catchall"
[1800304.065] (II) Using input driver 'evdev' for 'DVBSky S960/S860'
[1800304.065] (**) DVBSky S960/S860: always reports core events
[1800304.065] (**) evdev: DVBSky S960/S860: Device: "/dev/input/event15"
[1800304.065] (--) evdev: DVBSky S960/S860: Vendor 0x572 Product 0x6831
[1800304.065] (--) evdev: DVBSky S960/S860: Found keys
[1800304.065] (II) evdev: DVBSky S960/S860: Configuring as keyboard
[1800304.065] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc1/input18/event15"
[1800304.065] (II) XINPUT: Adding extended input device "DVBSky S960/S860" (type: KEYBOARD, id 12)
[1800304.065] (**) Option "xkb_rules" "evdev"
[1800304.065] (**) Option "xkb_model" "pc105"
[1800304.065] (**) Option "xkb_layout" "de,us"
[1800304.065] (**) Option "xkb_variant" ","
[1800304.065] (**) Option "xkb_options" "grp:alt_shift_toggle"
[1800304.066] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[1800304.066] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[1800304.066] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[1800304.066] (**) AT Translated Set 2 keyboard: always reports core events
[1800304.066] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[1800304.066] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[1800304.066] (--) evdev: AT Translated Set 2 keyboard: Found keys
[1800304.066] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[1800304.066] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[1800304.066] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[1800304.066] (**) Option "xkb_rules" "evdev"
[1800304.066] (**) Option "xkb_model" "pc105"
[1800304.066] (**) Option "xkb_layout" "de,us"
[1800304.066] (**) Option "xkb_variant" ","
[1800304.066] (**) Option "xkb_options" "grp:alt_shift_toggle"
[1800304.067] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[1800304.067] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[1800304.067] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[1800304.067] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[1800304.067] (II) LoadModule: "synaptics"
[1800304.067] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[1800304.069] (II) Module synaptics: vendor="X.Org Foundation"
[1800304.069] compiled for 1.19.1, module version = 1.9.0
[1800304.069] Module class: X.Org XInput Driver
[1800304.069] ABI class: X.Org XInput driver, version 24.1
[1800304.069] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[1800304.069] (**) SynPS/2 Synaptics TouchPad: always reports core events
[1800304.069] (**) Option "Device" "/dev/input/event7"
[1800304.095] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5598 (res 67)
[1800304.095] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4670 (res 111)
[1800304.095] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[1800304.095] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[1800304.095] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[1800304.095] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[1800304.095] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[1800304.095] (**) SynPS/2 Synaptics TouchPad: always reports core events
[1800304.121] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[1800304.121] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[1800304.121] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[1800304.121] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[1800304.121] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[1800304.122] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[1800304.122] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[1800304.122] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[1800304.122] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[1800304.122] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[1800304.122] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[1800304.122] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[1800304.122] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
[1800304.122] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[1800304.122] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[1800304.122] (**) TPPS/2 IBM TrackPoint: always reports core events
[1800304.122] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
[1800304.123] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[1800304.123] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[1800304.123] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[1800304.123] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[1800304.123] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[1800304.123] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[1800304.123] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[1800304.123] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input9/event8"
[1800304.123] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 15)
[1800304.123] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[1800304.123] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[1800304.123] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[1800304.123] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[1800304.123] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[1800304.123] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[1800304.123] (II) No input driver specified, ignoring this device.
[1800304.123] (II) This device may have been added with another device file.
[1800304.134] (II) config/udev: removing device DVBSky S960/S860
[1800304.142] (II) evdev: DVBSky S960/S860: Close
[1800304.142] (II) UnloadModule: "evdev"
[1800304.142] (II) config/udev: Adding input device DVBSky S960/S860 (/dev/input/event15)
[1800304.142] (**) DVBSky S960/S860: Applying InputClass "evdev keyboard catchall"
[1800304.142] (II) Using input driver 'evdev' for 'DVBSky S960/S860'
[1800304.142] (**) DVBSky S960/S860: always reports core events
[1800304.142] (**) evdev: DVBSky S960/S860: Device: "/dev/input/event15"
[1800304.142] (--) evdev: DVBSky S960/S860: Vendor 0x572 Product 0x6831
[1800304.142] (--) evdev: DVBSky S960/S860: Found keys
[1800304.142] (II) evdev: DVBSky S960/S860: Configuring as keyboard
[1800304.142] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc1/input18/event15"
[1800304.142] (II) XINPUT: Adding extended input device "DVBSky S960/S860" (type: KEYBOARD, id 12)
[1800304.142] (**) Option "xkb_rules" "evdev"
[1800304.142] (**) Option "xkb_model" "pc105"
[1800304.142] (**) Option "xkb_layout" "de,us"
[1800304.142] (**) Option "xkb_variant" ","
[1800304.142] (**) Option "xkb_options" "grp:alt_shift_toggle"
[1800305.881] (II) intel(0): EDID vendor "LEN", prod id 16467
[1800305.881] (II) intel(0): Printing DDC gathered Modelines:
[1800305.881] (II) intel(0): Modeline "1680x1050"x0.0 122.00 1680 1712 1776 1904 1050 1051 1054 1066 -hsync -vsync (64.1 kHz eP)
[1800305.881] (II) intel(0): Modeline "1680x1050"x0.0 101.67 1680 1712 1776 1904 1050 1051 1054 1066 -hsync -vsync (53.4 kHz e)Is there a way to force LibreELEC always using the Intel graphic card? /etc/X11/ is mounted readonly due to the squashfs loop device that's why I can't simply replace xorg-radeon.conf. 
Any ideas?
