S802/S812-Libreelec images for 7/8/x

  • The latest Image runs very smooth on Tronsmart Vega S89-H, but sadly no ir control possible with it. As far i understand it is buggy actually and there is a fix provided in newer versions, can we probably have an updated image with ir fix included?

  • I finally managed to install an earlier OE version for tronsmart s82 v6. After that I copied via LAN the .tar in the update folder and installed LE 8.2.3 .

    The problem is that I cannot use my remote after this. In OE worked fine. Now nothing. What should I do?

  • I finally managed to install an earlier OE version for tronsmart s82 v6. After that I copied via LAN the .tar in the update folder and installed LE 8.2.3 .

    The problem is that I cannot use my remote after this. In OE worked fine. Now nothing. What should I do?

    Try to find the original remote.conf for the box. You can do this in Android (the image that came loaded onto the box) by searching for it with ES File Explorer. I believe its in the root of Android in the .etc folder. Once you find it save a copy to a USB stick.

    You may also find it by searching google, or you may also find it here -

    remote.conf repository - Page 14 - Amlogic - LibreELEC Forum

    The remote.conf needs to be copied into the configfiles folder in Libreelec. You need to ssh into the box via Windows, or use Winscp to transfer the file via a Windows PC to Libreelec.

    Reboot and see if it worked.

    MXIII-G, M8 and Beeklink MXIII Plus LE 8.2.2 - Demetris, M8S balbes150 8.2.3.1, Mecool M8S Pro+ Coreelec 8.95.0, ABOX A1 MAX - Coreelec and Libreelec 8.2.3.1. Thanks to all.

  • Try to find the original remote.conf for the box. You can do this in Android (the image that came loaded onto the box) by searching for it with ES File Explorer. I believe its in the root of Android in the .etc folder. Once you find it save a copy to a USB stick.

    You may also find it by searching google, or you may also find it here -

    remote.conf repository - Page 14 - Amlogic - LibreELEC Forum

    The remote.conf needs to be copied into the configfiles folder in Libreelec. You need to ssh into the box via Windows, or use Winscp to transfer the file via a Windows PC to Libreelec.

    Reboot and see if it worked.

    Thank you for your help. I finally made it. I found a working remote.conf of a beeline m18 that seemed alike and did the job using ssh from my mac.

  • Thank you for your help. I finally made it. I found a working remote.conf of a beeline m18 that seemed alike and did the job using ssh from my mac.

    Good news, glad I could help.

    MXIII-G, M8 and Beeklink MXIII Plus LE 8.2.2 - Demetris, M8S balbes150 8.2.3.1, Mecool M8S Pro+ Coreelec 8.95.0, ABOX A1 MAX - Coreelec and Libreelec 8.2.3.1. Thanks to all.

  • Good news, glad I could help.

    Would you be do kind and help me with my my vega s89-h remote too? I have a remote conf that worked in all Libreelec or openelec versions but somehow it's not recognized in latest m8 image with s82 I had even problems with power button on the box.

  • Am going to start LE 9 builds when kodi 18(Leia) goes into beta/rc stage so stay tuned :)

    Wow, 8.2.3 is the most complete fully working build I had on my MXIII-2GB(S802). Can't wait to test out the new 9.0 builds. Thanks for still supporting these old boxes.
    Now that Beta2 is out, I presume you will be doing test builds shortly :thumbup:

    Kodi 17.6 DSPlayer Windows | LibreELEC 8.2.3 for MX-III 2GB Amlogic S802 by Demetris

  • Would you be do kind and help me with my my vega s89-h remote too? I have a remote conf that worked in all Libreelec or openelec versions but somehow it's not recognized in latest m8 image with s82 I had even problems with power button on the box.

    Follow the same steps as shown in post 1534.

    MXIII-G, M8 and Beeklink MXIII Plus LE 8.2.2 - Demetris, M8S balbes150 8.2.3.1, Mecool M8S Pro+ Coreelec 8.95.0, ABOX A1 MAX - Coreelec and Libreelec 8.2.3.1. Thanks to all.

  • Follow the same steps as shown in post 1534.

    I have put the remote.conf in the config directory, this one was always working but it does not in the latest image somehow. It's same box as beelink and orbsmart and in the image from the user dreshel it was working with the s82 image. This tree s82 image is doing something different unfortunately.

  • I have put the remote.conf in the config directory, this one was always working but it does not in the latest image somehow. It's same box as beelink and orbsmart and in the image from the user dreshel it was working with the s82 image. This tree s82 image is doing something different unfortunately.

    Try this - Create remote.conf from scratch

    MXIII-G, M8 and Beeklink MXIII Plus LE 8.2.2 - Demetris, M8S balbes150 8.2.3.1, Mecool M8S Pro+ Coreelec 8.95.0, ABOX A1 MAX - Coreelec and Libreelec 8.2.3.1. Thanks to all.