Nightly Builds

    edit says #2:

    Good morning
    (LibreELEC-RPi5.aarch64-13.0-nightly-20260715-314b0bf)
    I think/suspect I’ve found the culprit
    LibreELEC --> Settings --> System --> Input --> Peripherals --> CEC Adapter (7.1.1 old adapter)
    (this is a workaround for me)
    ...
    On start-up ... (ms) 0
    Repeat ... (ms) 0
    ...
    ...
    ...
    ...
    ...
    Repeat delay ... (ms) 50 / (can’t go any lower)
    Saved
    (made a backup just in case)
    Updated to
    LibreELEC-RPi5.aarch64-13.0-nightly-20260716-05f71dc
    Done
    Seems to be working for now (in my humble opinion)
    Funnily enough, there are now
    >> 2x (two) <<
    LibreELEC --> Settings --> System --> Input --> Peripherals --> CEC Adapter --> 8.0.0 - firmware v0
    are present
    I’ve no idea what’s going on
    I can’t get it to work any other way
    this is a workaround for >>me<<
    Best regards, jd
    If anyone spots any errors, please correct them
    Translated with DeepL

    Yes, use your previous settings. Double-check them and/or reset to default and set them as desired - the two cec adapters might have caused some mess to kodi's cec settings file.

    so long,

    Hias

    Hello Kodi Team,

    I’m experiencing the same issue as in #162 & #163 in the version

    LibreELEC-RPi5.aarch64-13.0-nightly-20260730-cad29d6

    again. 2x 8.1.1 firmware v0 (HDMI 1 & HDMI 2)

    Kind regards, jd

    Translated with DeepL

    johnny depp the two CEC adapters are expected and kodi now supports separate configuration of both.

    If you have CEC issues make sure you start with clean settings, whatever you changed before in CEC settings may now interfere.

    Stop kodi, remove the old CEC settings and reboot:

    Code
    systemctl stop kodi
rm /storage/.kodi/userdata/peripheral_data/cec*
reboot

    If you get "double button presses" from CEC then try increasing the Remote button double press timeout setting, eg to 30 or 50ms - that can be needed on some buggy TVs.

    so long,

    Hias

    Quote from HiassofT

    If you get "double button presses" from CEC then try increasing the Remote button double press timeout setting, eg to 30 or 50ms - that can be needed on some buggy TVs.

    Checking through the libcec issues I noticed you might need to set that to even higher values like 200 or 250ms - just check what works best for you.

    so long,

    Hias

    Oops

    That was quick as a flash ("ruck-zuck" in German)

    CEC reset (renamed)

    LibreELEC-RPi5.aarch64-13.0-nightly-20260730-cad29d6 in .update

    Restart

    And it’s working!

    Thanks jd

    Translated with DeepL