DTS, Dolby, Dolby+, DTS-HD MA, Atmos works only on 1080p 60HZ with micro cuts
In my case
For Orange pi plus one H6 , 4K 30Hz doesnt work! Canot sound on this resolution
HDR content seems warm / yellow colorized on TV . It's not the TV with the PC I see the colors well. IS possible to fix it?
Thanks!
DTS, Dolby, Dolby+, DTS-HD MA, Atmos works only on 1080p 60HZ with micro cuts
In my case
For Orange pi plus one H6 , 4K 30Hz doesnt work! Canot sound on this resolution
This sounds like you're using old image. Can you check and report which version of the image you're using? What do you mean "doesn't work!"? No image at all or only no sound? I fixed plenty of H6 display related issues recently and all my monitors and TV work ok. There might be case where 4k@60 may not work perfectly, but 4k@30 work on both 4k capable devices I have.
HDR content seems warm / yellow colorized on TV . It's not the TV with the PC I see the colors well. IS possible to fix it?
HDR is fine, 10-bit output is not yet implemented. BTW, this is no passthrough related, so off topic.
This sounds like you're using old image. Can you check and report which version of the image you're using? What do you mean "doesn't work!"? No image at all or only no sound? I fixed plenty of H6 display related issues recently and all my monitors and TV work ok. There might be case where 4k@60 may not work perfectly, but 4k@30 work on both 4k capable devices I have.
version LibreELEC-H6.arm-9.80-devel-20200708214100-87cbddb ...Ooooops my fault I try the new version Thanks
I mean 'doesnt work' --> no sound.. of course
Anyway thanks for the project!. Its fantastic!
EDIT: I have uptate version to LibreELEC-H6.arm-9.80-devel-20210204215059-a05199a there is no sound in Orange Pi One Plus H6 on 4K@30hz . If I change to 1080p@60hz , works well all formats with micro cuts
caracolo I try to test your use case with my Orange pi Lite 2 (H6) but sadly nothing work well on that little thing...
- No Ethernet port
- Only usb2 work (no usb3)
- try to put a usb hub with the dongle for the remote and an ethernet USB adapter but I can start only 1080p content... Ehternet adapater no enough fast I think.
So, sorry I can help you... But I can confirm that passthrough work in 4K 30hz with my Pine H64.
Finally, I successfully play a 4K HDR Atmos in the definition 2160p at 30hz with my Orange pi Lite 2 (The first time, I burned the worng image, my bad )
It's a real pain using Lite 2 compare to the Pine H64 !! It doesn't stop rebooting each time I use a little bit too much ressources... And I must reboot it between two test else it freeze.
But anyway, is' not the subject of this thread.
In 2160p 30Hz
Atmos -> Ok
DTS HD MA -> Ok
DTS:X -> Ok
I stopped there, other sound formats are not a real challenge...
But with little sound cutoff...
DTS on Orange Pi 2 mini with Samsung TV and Yamaha soundbar no issues found
jernej Is it possible to have a new release of your "librelec passthrough edition" with all modifications you did since febuary ?
jernej No problem for me ! Thank you !
Maybe this is the right place to post it...:
Input channels on AVR wrong setup
I have problem on my speakers channel
Done, currently based on 9.95.1 - 10beta1. Please report if it works better or worse.
Sadly, with the new passthrough version sound doesn't work any more on my Orange Pi PC. There is always a quiet, but noticeable noise. The UI sounds work, but all sound in media files or streams do not. In irregular periods there are sounds to hear for a fraction of a second. It makes no difference if I have set 'passthrough' on or off.
Kristian Test images are updated to beta2. This time I actually test them and they work as well as before.
Sorry for the late reply, I was away from the device the last days.
Sadly, it still does not work. It is "playing" the sound for a fraction of a second, but then silent. UI sounds work. No difference whether passthrough is set to on or off. Then I installed the normal 10.0 beta 2 version. That works without problems, of course no passthrough. My devices: Orange Pi PC and Onkyo TX-SR507 (a HDMI 1.3a 5.1 receiver).
