Unofficial LE for RK356x RK3328\RK3399 RK3588(s)

Quote from balbes150

This has been fixed in the new images.

Since which date? From 20200214 and on?

Ive tried today's image and emmc installation doesn't work for me.

The box doesn't see internal storage.

Maybe I get something wrong?

Do I have to kinda mount it manually or something?

I have to mention that earlier releases (summer ones, which were removed from yandex recently) did work. And I'm using the same dtb "rockpro64".

I did a clean install as recommended and now I can't move the system to emmc and roll back to a legacy build as it's no longer present in the cloud.

Quote from balbes150

Use the latest versions, where NVMe is defined on RockPI4b.i

20200214 works as 20200201, nvme was found after loading external kernel modules after mounting storage.

If I config storage to nvme, system halted, nvme is not visible. If I manualy insmod dw-edma.ko dw-edma-pcie.ko nvme-core.ko nvme.ko, nvme was become visible. That files from /sysroot/usr/lib/kernel-overlays/base/lib/modules/5.5.1/kernel/drivers/....

Quote from balbes150

Do you copy the old DTB manually into the system ?

No. Using the one stored in the new image

hey balbes150 Can you post your source? I'd like to test few changes wrt packages etc.

balbes150 I have a RK3399 Hugsun X99 TV Box

I tried kwiboo's source and when I put it on sd card it no longer boots. However all your build are flawless

Thanks,

Quote from balbes150

Тестируйте изображения LibreELEC с KODI-19 для S9xxx

Hi balbes150.I don't can start up your builds for rockpro64. I get boot screen LE and then the boot does not go. I tried 4 latest builds:

LibreELEC-ARM-ALL.arm-9.80-devel-20200331083128-569f834-rk3399.img

LibreELEC-ARM-ALL.arm-9.80-devel-20200327143100-569f834-rk3399.img

LibreELEC-ARM-ALL.arm-9.80-devel-20200326142055-569f834-rk3399.img

LibreELEC-ARM-ALL.aarch64-9.80-devel-20200324091141-569f834-rk3399.img

Please help me.

Quote from balbes150

If you have any working system on the SD card that starts normally, you will be able to check the LE. You need to try to replace the u-boot in LE, on the version with a working SD card. You need to perform a few additional steps when preparing an SD card.

1. Remove from working SD card u-boot. This can be done with this command on a Linux PC.

dd if=/dev/<name_you_SD_works_card> of=u-boot-rockpro.img bs=1M count=16

2. Write LE to SD card, configure DTB and replace u-boot with taken from working SD card. U-boot replacement is performed by two commands.

dd if=u-boot-rockpro.img of=/dev/<new_SD_card_LE> conv=fsync bs=1 count=442

dd if=u-boot-rockpro.img of=/dev/<new_SD_card_LE> conv=fsync bs=512 skip=1 seek=1

After that, you can try running LE on RockPro. The last two commands write a working u-boot and save the existing partition table for the system written to the SD card. By the way, in the same way you can replace u-boot for Armbian system and check the start of any image.

Display More

Can i do replace u-boot on Windows?

I have H96 Max Plus (Rockchip 3328) board.
Image works is LibreELEC-RK3328.arm-9.80-devel-20191231082706-fae7724-rockbox.img.gz (kwiboo)
with dtb(easyb) rk3328-box-h96mp.dtb

There are some interface issues (when change the source on TV or turn on/off or unplug-plug in HDMI) then the whole image is red filter
And repositories do not work (failed to connect)

Quote from blackride

Hi balbes150.I don't can start up your builds for rockpro64. I get boot screen LE and then the boot does not go. I tried 4 latest builds:

LibreELEC-ARM-ALL.arm-9.80-devel-20200331083128-569f834-rk3399.img

LibreELEC-ARM-ALL.arm-9.80-devel-20200327143100-569f834-rk3399.img

LibreELEC-ARM-ALL.arm-9.80-devel-20200326142055-569f834-rk3399.img

LibreELEC-ARM-ALL.aarch64-9.80-devel-20200324091141-569f834-rk3399.img

Please help me.

Display More

Hi,

I can confirm this a little bit, but my RockPro64 starts, "just" Kodi crashes. I can see that the RockPro gets a ethernet address assigned and can then access it via Samba for a short time, before it reboots. I use the normal DTB and not the V2

Attached is the zip file with all the logs.The only error I see is: "ERROR: DBus error: org.freedesktop.DBus.Error.ServiceUnknown - The name org.freedesktop.UPower was not provided by any .service files"

Quote from balbes150

You have configured DTB in the file (uEnv.txt) ?

Yes. I tried rk3399-rockpro64.dtb and rk3399-rockpro64-v2.dtb.