After the update of Libre-elec to 9.0.2 I can't atch tv anymore I got a warning htsp client server unreachable. In tv-headend, there's no adapter showing up. Dmesg gives this outp[ut. Anybody knows what to do?
Code
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.36 (jenkins@tsuboi) (gcc version 8.2.0 (GCC)) #1 SMP Sat May 4 17:23:44 CEST 2019
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x2f800000
[ 0.000000] On node 0 totalpages: 196608
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4a4 with crng_init=0
[ 0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s41036 r8192 d24500 u73728
[ 0.000000] pcpu-alloc: s41036 r8192 d24500 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880
[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1360 bcm2708_fb.fbheight=768 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=2901-3633 disk=UUID=b4dcdfde-4873-4c35-9e80-6506818fb1ce quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 754556K/786432K available (9216K kernel code, 689K rwdata, 1992K rodata, 3072K init, 527K bss, 23684K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xb0800000 - 0xff800000 (1264 MB)
[ 0.000000] lowmem : 0x80000000 - 0xb0000000 ( 768 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (3072 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 690 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 528 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 29560 entries in 87 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000018] Switching to timer-based delay loop, resolution 52ns
[ 0.000274] Console: colour dummy device 80x30
[ 0.000298] console [tty0] enabled
[ 0.000347] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
[ 0.000370] pid_max: default: 32768 minimum: 301
[ 0.000617] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000638] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001564] CPU: Testing write buffer coherency: ok
[ 0.002112] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002925] Setting up static identity map for 0x100000 - 0x10003c
[ 0.003107] rcu: Hierarchical SRCU implementation.
[ 0.005873] smp: Bringing up secondary CPUs ...
[ 0.006965] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.008092] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.009153] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.009310] smp: Brought up 1 node, 4 CPUs
[ 0.009325] SMP: Total of 4 processors activated (153.00 BogoMIPS).
[ 0.009335] CPU: All CPU(s) started in HYP mode.
[ 0.009344] CPU: Virtualization extensions available.
[ 0.010276] devtmpfs: initialized
[ 0.023042] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.023301] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.023326] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.023978] pinctrl core: initialized pinctrl subsystem
[ 0.024981] NET: Registered protocol family 16
[ 0.028628] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.033826] cpuidle: using governor ladder
[ 0.033870] cpuidle: using governor menu
[ 0.034425] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.034436] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.034667] Serial: AMBA PL011 UART driver
[ 0.038585] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.079904] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.081962] SCSI subsystem initialized
[ 0.082188] usbcore: registered new interface driver usbfs
[ 0.082249] usbcore: registered new interface driver hub
[ 0.082370] usbcore: registered new device driver usb
[ 0.087891] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-06 14:47, variant start_x
[ 0.090384] raspberrypi-firmware soc:firmware: Firmware hash is b403ee6ed819f9ac7a96834ac437b6cfdd4512ad
[ 0.095275] clocksource: Switched to clocksource arch_sys_counter
[ 0.193807] FS-Cache: Loaded
[ 0.204871] NET: Registered protocol family 2
[ 0.205619] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.205662] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.205777] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.205966] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.206123] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.206173] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.206490] NET: Registered protocol family 1
[ 0.207188] RPC: Registered named UNIX socket transport module.
[ 0.207198] RPC: Registered udp transport module.
[ 0.207208] RPC: Registered tcp transport module.
[ 0.207217] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.365219] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.367790] Initialise system trusted keyrings
[ 0.367989] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.377582] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.378416] FS-Cache: Netfs 'nfs' registered for caching
[ 0.379262] NFS: Registering the id_resolver key type
[ 0.379300] Key type id_resolver registered
[ 0.379310] Key type id_legacy registered
[ 0.379330] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.379839] FS-Cache: Netfs 'cifs' registered for caching
[ 0.388279] Key type asymmetric registered
[ 0.388294] Asymmetric key parser 'x509' registered
[ 0.388373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.388386] io scheduler noop registered (default)
[ 0.388397] io scheduler deadline registered
[ 0.388630] io scheduler cfq registered
[ 0.388642] io scheduler mq-deadline registered
[ 0.388653] io scheduler kyber registered
[ 0.388822] io scheduler bfq registered
[ 0.393308] BCM2708FB: allocated DMA memory 0xef850000
[ 0.393344] BCM2708FB: allocated DMA channel 0
[ 0.432001] Console: switching to colour frame buffer device 170x48
[ 0.452313] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.452557] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.453272] vc-sm: Videocore shared memory driver
[ 0.466158] brd: module loaded
[ 0.466300] loop: module loaded
[ 0.488522] usbcore: registered new interface driver rtsx_usb
[ 0.488536] Loading iSCSI transport class v2.0-870.
[ 0.489038] iscsi: registered transport (tcp)
[ 0.489532] libphy: Fixed MDIO Bus: probed
[ 0.489586] tun: Universal TUN/TAP device driver, 1.6
[ 0.489839] usbcore: registered new interface driver lan78xx
[ 0.489893] usbcore: registered new interface driver dm9601
[ 0.489955] usbcore: registered new interface driver smsc95xx
[ 0.490013] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.518011] dwc_otg 3f980000.usb: base=(ptrval)
[ 0.718316] Core Release: 2.80a
[ 0.718329] Setting default values for core params
[ 0.718359] Finished setting default values for core params
[ 0.918723] Using Buffer DMA mode
[ 0.918733] Periodic Transfer Interrupt Enhancement - disabled
[ 0.918743] Multiprocessor Interrupt Enhancement - disabled
[ 0.918755] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.918778] Dedicated Tx FIFOs mode
[ 0.919451] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = af844000 dma = 0xef844000 len=9024
[ 0.919481] FIQ FSM acceleration enabled for :
[ 0.919481] Non-periodic Split Transactions
[ 0.919481] Periodic Split Transactions
[ 0.919481] High-Speed Isochronous Endpoints
[ 0.919481] Interrupt/Control Split Transaction hack enabled
[ 0.919492] dwc_otg: Microframe scheduler enabled
[ 0.919555] WARN::hcd_init_fiq:457: FIQ on core 1
[ 0.919566] WARN::hcd_init_fiq:458: FIQ ASM at 80724154 length 36
[ 0.919578] WARN::hcd_init_fiq:484: MPHI regs_base at f0006000
[ 0.919666] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.919704] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.919745] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 0.919797] Init: Port Power? op_state=1
[ 0.919806] Init: Power Port (0)
[ 0.920151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.920166] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.920179] usb usb1: Product: DWC OTG Controller
[ 0.920192] usb usb1: Manufacturer: Linux 4.19.36 dwc_otg_hcd
[ 0.920204] usb usb1: SerialNumber: 3f980000.usb
[ 0.920872] hub 1-0:1.0: USB hub found
[ 0.920948] hub 1-0:1.0: 1 port detected
[ 0.921662] dwc_otg: FIQ enabled
[ 0.921671] dwc_otg: NAK holdoff enabled
[ 0.921681] dwc_otg: FIQ split-transaction FSM enabled
[ 0.921696] Module dwc_common_port init
[ 0.922040] usbcore: registered new interface driver usb-storage
[ 0.922248] mousedev: PS/2 mouse device common for all mice
[ 0.922678] i2c /dev entries driver
[ 0.924553] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.924947] bcm2835-cpufreq: min=600000 max=1200000
[ 0.925667] sdhci: Secure Digital Host Controller Interface driver
[ 0.925676] sdhci: Copyright(c) Pierre Ossman
[ 0.926198] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 0.926782] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.926962] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.930100] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.930208] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.931667] usbcore: registered new interface driver usbhid
[ 0.931672] usbhid: USB HID core driver
[ 0.932205] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.933350] [vc_sm_connected_init]: start
[ 0.942813] [vc_sm_connected_init]: end - returning 0
[ 0.945084] NET: Registered protocol family 10
[ 0.946310] Segment Routing with IPv6
[ 0.946406] NET: Registered protocol family 17
[ 0.946552] Key type dns_resolver registered
[ 0.946903] Registering SWP/SWPB emulation handler
[ 0.947613] Loading compiled-in X.509 certificates
[ 0.953461] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.953519] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.954954] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.954962] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.978992] sdhost: log_buf @ (ptrval) (ef847000)
[ 1.011182] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.012505] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.013859] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.016423] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.025307] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.027135] console [netcon0] enabled
[ 1.027146] netconsole: network logging started
[ 1.027156] of_cfs_init
[ 1.027205] of_cfs_init: OK
[ 1.049217] Freeing unused kernel memory: 3072K
[ 1.052139] Run /init as init process
[ 1.081987] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.082208] random: fast init done
[ 1.084629] mmc0: new high speed SDHC card at address 0001
[ 1.085606] mmcblk0: mmc0:0001 SD16G 29.2 GiB (quirks 0x80000000)
[ 1.087783] mmcblk0: p1 p2
[ 1.121197] mmc1: new high speed SDIO card at address 0001
[ 1.125388] Indeed it is in host mode hprt0 = 00021501
[ 1.308641] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.308757] Indeed it is in host mode hprt0 = 00001101
[ 1.508843] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 1.508853] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.509253] hub 1-1:1.0: USB hub found
[ 1.509309] hub 1-1:1.0: 5 ports detected
[ 1.788631] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.878792] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 1.878801] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.881261] smsc95xx v1.0.6
[ 1.930987] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:68:7e:db
[ 2.018626] usb 1-1.5: new high-speed USB device number 4 using dwc_otg
[ 2.110260] usb 1-1.5: New USB device found, idVendor=05e3, idProduct=0605, bcdDevice= 6.0b
[ 2.110272] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.110278] usb 1-1.5: Product: USB2.0 Hub
[ 2.110853] hub 1-1.5:1.0: USB hub found
[ 2.111110] hub 1-1.5:1.0: 4 ports detected
[ 2.391989] usb 1-1.5.3: new high-speed USB device number 5 using dwc_otg
[ 2.433829] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.482507] usb 1-1.5.3: New USB device found, idVendor=0572, idProduct=c68a, bcdDevice= 8.00
[ 2.482518] usb 1-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.482524] usb 1-1.5.3: Product: EyeTV Stick
[ 2.482531] usb 1-1.5.3: Manufacturer: Geniatech
[ 2.482537] usb 1-1.5.3: SerialNumber: 161206
[ 2.933109] systemd[1]: System time before build time, advancing clock.
[ 2.941891] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 2.942270] systemd[1]: Detected architecture arm.
[ 2.946284] systemd[1]: Set hostname to <LibreELEC>.
[ 3.093117] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.093677] systemd[1]: Listening on Journal Socket.
[ 3.094253] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.098649] systemd[1]: Starting Show Version...
[ 3.202709] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.205141] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.206004] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.206954] systemd[1]: Created slice User and Session Slice.
[ 3.207296] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.225100] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 3.300449] kernel-overlays-setup: setup base modules
[ 3.363539] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.36
[ 3.402368] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[ 3.402561] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[ 3.403420] kernel-overlays-setup: processing conf /storage/.cache/kernel-overlays/50-driver.dvb.crazycat.conf
[ 3.483200] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/driver.dvb.crazycat/lib/modules/4.19.36
[ 3.483330] kernel-overlays-setup: running depmod
[ 6.237513] kernel-overlays-setup: done
[ 6.440266] systemd-journald[203]: Received request to flush runtime journal from PID 1
[ 7.083722] random: crng init done
[ 7.083734] random: 7 urandom warning(s) missed due to ratelimiting
[ 7.529405] Console: switching to colour dummy device 80x30
[ 7.603693] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 7.671238] media: loading out-of-tree module taints kernel.
[ 7.672522] media: Linux media interface: v0.10
[ 7.686977] videodev: Linux video capture interface: v2.00
[ 7.686994] WARNING: You are using an experimental version of the media stack.
[ 7.686994] As the driver is backported to an older kernel, it doesn't offer
[ 7.686994] enough quality for its usage in production.
[ 7.686994] Use it with care.
[ 7.686994] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 7.686994] b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base.
[ 7.699799] WARNING: You are using an experimental version of the media stack.
[ 7.699799] As the driver is backported to an older kernel, it doesn't offer
[ 7.699799] enough quality for its usage in production.
[ 7.699799] Use it with care.
[ 7.699799] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 7.699799] b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base.
[ 7.702562] WARNING: You are using an experimental version of the media stack.
[ 7.702562] As the driver is backported to an older kernel, it doesn't offer
[ 7.702562] enough quality for its usage in production.
[ 7.702562] Use it with care.
[ 7.702562] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 7.702562] b9ac0e830b87e363d357353ab54ae9f892bbd821 si2183: i2x_mutex in base.
[ 7.707108] dvb-usb: found a 'Mygica T230C2 DVB-T/T2/C' in warm state.
[ 7.708402] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.729929] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.760377] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 7.760603] usbcore: registered new interface driver brcmfmac
[ 8.044216] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 8.044307] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 8.044933] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[ 8.397134] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 8.397555] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.725442] uart-pl011 3f201000.serial: no DMA platform data
[ 9.865324] dvb-usb: bulk message failed: -110 (1/0)
[ 9.972458] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 9.976369] dvbdev: DVB: registering new adapter (Mygica T230C2 DVB-T/T2/C)
[ 9.976392] usb 1-1.5.3: media controller created
[ 9.980937] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[ 10.000251] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.002781] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 10.005396] 8021q: 802.1Q VLAN Support v1.8
[ 11.998687] dvb-usb: bulk message failed: -110 (16/0)
[ 11.998707] si2168 3-0064: probe failed = -121
[ 11.998733] si2168: probe of 3-0064 failed with error -121
[ 11.998756] dvb-usb: no frontend was attached by 'Mygica T230C2 DVB-T/T2/C'
[ 12.028635] Registered IR keymap rc-total-media-in-hand-02
[ 12.028797] rc rc0: Mygica T230C2 DVB-T/T2/C as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.3/rc/rc0
[ 12.028945] input: Mygica T230C2 DVB-T/T2/C as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.3/rc/rc0/input0
[ 12.029564] rc rc0: lirc_dev: driver dvb_usb_cxusb registered at minor = 0, scancode receiver, no transmitter
[ 12.029576] dvb-usb: schedule remote query interval to 100 msecs.
[ 13.386396] Bluetooth: Core ver 2.22
[ 13.386457] NET: Registered protocol family 31
[ 13.386462] Bluetooth: HCI device and connection manager initialized
[ 13.386483] Bluetooth: HCI socket layer initialized
[ 13.386492] Bluetooth: L2CAP socket layer initialized
[ 13.386520] Bluetooth: SCO socket layer initialized
[ 13.391222] Bluetooth: HCI UART driver ver 2.3
[ 13.391234] Bluetooth: HCI UART protocol H4 registered
[ 13.391292] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 13.391470] Bluetooth: HCI UART protocol Broadcom registered
[ 14.132019] dvb-usb: bulk message failed: -110 (2/0)
[ 14.132038] dvb-usb: Mygica T230C2 DVB-T/T2/C successfully initialized and connected.
[ 14.132198] usbcore: registered new interface driver dvb_usb_cxusb
[ 16.268660] dvb-usb: bulk message failed: -110 (1/0)
[ 18.398787] dvb-usb: bulk message failed: -110 (1/0)
[ 20.532022] dvb-usb: bulk message failed: -110 (1/0)
[ 22.665326] dvb-usb: bulk message failed: -110 (1/0)
[ 24.798664] dvb-usb: bulk message failed: -110 (1/0)
[ 26.932037] dvb-usb: bulk message failed: -110 (1/0)
[ 29.065394] dvb-usb: bulk message failed: -110 (1/0)
[ 31.198713] dvb-usb: bulk message failed: -110 (1/0)
[ 33.332041] dvb-usb: bulk message failed: -110 (1/0)
[ 35.465402] dvb-usb: bulk message failed: -110 (1/0)
[ 37.598644] dvb-usb: bulk message failed: -110 (1/0)
[ 39.732035] dvb-usb: bulk message failed: -110 (1/0)
[ 41.865407] dvb-usb: bulk message failed: -110 (1/0)
[ 43.998724] dvb-usb: bulk message failed: -110 (1/0)
[ 46.132049] dvb-usb: bulk message failed: -110 (1/0)
[ 48.265380] dvb-usb: bulk message failed: -110 (1/0)
[ 50.398718] dvb-usb: bulk message failed: -110 (1/0)
[ 52.532057] dvb-usb: bulk message failed: -110 (1/0)
[ 54.665381] dvb-usb: bulk message failed: -110 (1/0)
[ 56.798712] dvb-usb: bulk message failed: -110 (1/0)
[ 58.932048] dvb-usb: bulk message failed: -110 (1/0)
[ 61.065404] dvb-usb: bulk message failed: -110 (1/0)
[ 63.198699] dvb-usb: bulk message failed: -110 (1/0)
[ 65.332042] dvb-usb: bulk message failed: -110 (1/0)
[ 67.465425] dvb-usb: bulk message failed: -110 (1/0)
[ 69.598700] dvb-usb: bulk message failed: -110 (1/0)
[ 71.732022] dvb-usb: bulk message failed: -110 (1/0)
[ 73.865366] dvb-usb: bulk message failed: -110 (1/0)
[ 75.998722] dvb-usb: bulk message failed: -110 (1/0)
[ 78.132043] dvb-usb: bulk message failed: -110 (1/0)
[ 80.265391] dvb-usb: bulk message failed: -110 (1/0)
[ 82.398701] dvb-usb: bulk message failed: -110 (1/0)
