Nightly images for A64, H3, H5, H6 and R40 boards

**jernej** · November 23, 2019 at 7:53 AM Official Post

Quote from jimbolaya

I did notice that LibreELEC will go to sleep or kind of turn off if the TV is turned off. But it doesn't wake up correctly. I'm sure there's a setting to prevent it from turning off that I haven't found yet. I'm hoping that the waking up will be fixed eventually.

This happens because TV notifies board when it's turned off over HDMI CEC. There is a setting what to do in such case somewhere in System / Input (I don't have any board here ATM). You can of course disable powering down the board there.

Proper sleeping/waking is tricky, so it won't be implemented soon.

lumpi · November 26, 2019 at 5:01 PM

Had the great idea to update today (not that i hadn't been warned)...

Inputstream adaptive and zattoo pvr are incompatible.. lets see how long it will take.

Note to self: don't update the rpi3 if you want to watch zattoo

turgus · November 26, 2019 at 5:17 PM

..maybe you better try using separate card for testing alphas!?..if all things which you want/need are working, then think about install (or use card as daily driver)..

lumpi · November 27, 2019 at 7:52 PM

Quote from turgus

..maybe you better try using separate card for testing alphas!?..if all things which you want/need are working, then think about install (or use card as daily driver)..

True i knew it was risky and i have an rpi which i wont update until my x2 is good again

I didn't mean to complain, just a word of warning to my fellow experimenters.

lumpi · December 5, 2019 at 11:18 PM

All working again

r2d2 · December 16, 2019 at 12:46 AM

jernej: I would like to use my PS3 gamepads with LibreElec via bluetooth. The bluetooth pairing procedure is to connect the controller to an USB port. Currently this does not work with your images because the bluez plugin "sixais" requires a hidraw device to program the bluetooth MAC. However the kernel config does not define CONFIG_HIDRAW. Could you please set this config option? linux.arm.conf#l3795

jamper · December 19, 2019 at 5:43 PM

Hello, do you know if the drivers for the Wi-Fi network will be implemented in the beelink x2?
And you could tell me why I get an error when starting the plex plugin and not starting it?

best regards

lumpi · December 19, 2019 at 7:19 PM

Quote from jamper

Hello, do you know if the drivers for the Wi-Fi network will be implemented in the beelink x2?
And you could tell me why I get an error when starting the plex plugin and not starting it?

best regards

The beelink x2 has one of two types of wifi inside. Mine has the realtek that doesn't have a properly mainlined driver (yet? Who knows) but it works well with Linux supported usb wifi sticks. I haven't heard of anyone with a broadcom based x2, probably those are very rare.

**jernej** · December 19, 2019 at 10:33 PM Official Post

r2d2 Allwinner: Enable HIDRAW driver by jernejsk · Pull Request #4072 · LibreELEC/LibreELEC.tv · GitHub

offbeat · December 20, 2019 at 7:12 PM

jernej Any idea if it possible to manually build latest LE master with a stable Kodi 18? No replies in dev forum so far build LibreELEC (master) + Kodi (stable)

**jernej** · December 21, 2019 at 8:31 AM Official Post

Quote from offbeat

Any idea if it possible to manually build latest LE master with a stable Kodi 18?

I guess it is, but you would have to modify build system itself. No response in that thread means that no much people are interested in doing that. I certainly rather spend my time in fixing or improving master than going back.

xn3k · December 21, 2019 at 11:04 AM

I've managed to build libreelec 9.2 with kodi 18.5 for orange pi pc plus (h3) 2 weeks ago.

At testing i found out it had problems maybe with drm (randomly green flashes till complete green lockup at playback) and random system freezes. so i'm back to nightly with kodi-git-18.3 from sometime in july.

i'll now try current master with kodi 18.5. maybe it run's better. for shure i'll share the images if it runs fine.

besit · December 24, 2019 at 10:17 PM

Can't force IMON VFD to work on OrangePi PC. LCDd 9.80.2.107 + LCDProc-XBMC plugins start but VFD keeps dark. When trying to start LCDd manually with

.kodi/addons/http://service.lcdd/bin/lcdd.start

or

LCDd -f -c /storage/.kodi/addons/http://service.lcdd/config/LCDd.conf -d imon

I keep getting

imon: ERROR opening /dev/lcd0 (No such file or directory)

imon: Did you load the iMON VFD kernel module?

Any suggestions?

**jernej** · December 25, 2019 at 8:17 AM Official Post

FYI, thermal driver PR was merged yesterday. Kodi should show now CPU temperature. Also on the SoC which have GPU temperature sensor (A64, H6), gputemp command will show GPU temperature. On H3, gputemp show same temperature as cputemp.

**jernej** · December 25, 2019 at 9:41 AM Official Post

besit Can you test this update? libreelec-h3.arm-9.80-devel-20191225103817-587b061.tar

I enabled additional drivers in kernel. If it works for you, I'll open PR so those drivers will be included in nightlies.

besit · December 25, 2019 at 7:54 PM

Quote from jernej

besit Can you test this update? libreelec-h3.arm-9.80-devel-20191225103817-587b061.tar

I enabled additional drivers in kernel. If it works for you, I'll open PR so those drivers will be included in nightlies.

Imon VFD works as expected. Thank you very much.

**jernej** · December 25, 2019 at 8:29 PM Official Post

besit changes are already merged and fix will be available in next nightly image.

Frianik · December 26, 2019 at 12:13 AM

any updates with hyperion/screengrabber on h3?