Display MoreLibreELEC 9.0 (Leia) Beta 1 has finally arrived after a long gestation period. Based upon Kodi v18 RC3, the 9.0 Beta 1 release contains many changes and refinements to user experience and a complete overhaul of the underlying OS core to improve stability and extend hardware support. Kodi v18 also brings new features like Kodi Retroplayer and DRM support that (equipped with an appropriate add-on) allows Kodi to unofficially stream content from services like Netflix and Amazon.
Compared to 8.2, major changes are:
Settings Add-on:
- Changeable SSH passwords!
- Default firewall (iptables) with simple configurations for Home/Public networks
- Updates are moved to their own menu, other options are cleaned up a little
- Safe Mode boot when Kodi experiences startup problems
Changeable SSH passwords and a default firewall configuration have been added to combat the increasing number of HTPC installs that can be found on the public internet. The increase is partly due to simple maths; our userbase has grown so the number of users inappropriately exposing their HTPC to the internet has also grown. The static password for libreelec is present on most/all password dictionary lists so it’s important we start encouraging users to change it (the first-run wizard will prompt when SSH is enabled).
More people are using VPN services for privacy without realising this exposes SSH/SMB/Web services. To combat this problem we have added simple firewall configurations for Home/Public networks; the Home configuration blocks inbound connections from non-private networks, e.g. traffic from the Internet to the public IP address used with the VPN connection.
As the Kodi piracy scene continues to decline we have seen an increase in users with outdated add-ons that cause problems during upgrades so “Safe Mode” counts Kodi startup crashes. After five startup failures it intervenes with a default (clean) configuration and prominent warning so users know there is a problem – but still have a working GUI to troubleshoot from.
![]()
Retroplayer:
Kodi v18 brings initial support for retro gaming and the ability to play hundreds of retro games directly from within Kodi. We provide a large number of emulator cores from our add-on repo, but no games (bring your own) although there are a couple of open source test game add-ons (2048 etc.) in our repo. In this first iteration of Kodi retro gaming support the user interface can be a little confusing and we still need to write-up some HOWTO guides for the wiki. Kodi developers are working on a game database (for Kodi v19) which will make the process of managing and using game ROMs easier in the future.
DVB Drivers:
We now offer a larger range of DVB drivers (depending on your platform) to choose from. The “DVB drivers from the latest kernel” option also includes the majority of Hauppage drivers which have been recently upstreamed into the kernel, which is great to see!
![]()
Rockchip:
Despite the 8.95.1 release number our Rockchip releases remain in an Alpha state with limited support. The Kodi version is updated but there are no significant video/audio improvements to the Rockchip 4.4 kernel codebase – and none planned. Our work on Rockchip support has refocussed onto the Linux 4.20 kernel to use the modern kernel frameworks needed for the next-generation Kodi video pipeline. This work is progressing nicely, but it means the 4.4 codebase “is what it is” until a future kernel bump.
New Devices:
Amlogic
- Khadas VIM(1) – requires a clean install if using current community images
- Libre Computer Le Potato
Rockchip
- 96rocks ROCK960
- ASUS Tinker Board
- Firefly ROC-RK3328-CC
- Khadas Edge
- PINE64 ROCK64
- PINE64 RockPro64
- Popcorn Hour RockBox
- Popcorn Hour Transformer
- Rockchip Sapphire Board
- Mqmaker MiQi
If you experience problems, please open an thread at our forum. You can also open an ticket at our issue tracker.
Downloads:
RPi 2/3 LibreELEC-RPi2.arm-8.95.001.img.gz (info)
RPi 0/1 LibreELEC-RPi.arm-8.95.001.img.gz (info)
Generic LibreELEC-Generic.x86_64-8.95.001.img.gz (info)
Odroid_C2 LibreELEC-Odroid_C2.arm-8.95.001.img.gz (info)
KVIM LibreELEC-KVIM.arm-8.95.001.img.gz (info)
LePotato LibreELEC-LePotato.arm-8.95.001.img.gz (info)
Slice LibreELEC-Slice.arm-8.95.001.img.gz (info)
Slice3 LibreELEC-Slice3.arm-8.95.001.img.gz (info)
WeTek_Core LibreELEC-WeTek_Core.arm-8.95.001.img.gz (info)
WeTek_Hub LibreELEC-WeTek_Hub.arm-8.95.001.img.gz (info)
Warning: Update at WP1 is broken if you use img.gz – please use .tar to update:
WeTek_Play LibreELEC-WeTek_Play.arm-8.95.001.tar (info)
WeTek_Play LibreELEC-WeTek_Play.arm-8.95.001.img.gz (info)
WeTek_Play_2 LibreELEC-WeTek_Play_2.arm-8.95.001.img.gz (info)
Rockchip RK3328Firefly ROC-RK3328-CC LibreELEC-RK3328.arm-8.90.010-roc-cc.img.gz (info)
Generic Rockchip Box LibreELEC-RK3328.arm-8.90.010-box.img.gz (info)
PINE64 ROCK64 / Popcorn Hour Transformer LibreELEC-RK3328.arm-8.90.010-rock64.img.gz (info)
Popcorn Hour RockBox LibreELEC-RK3328.arm-8.90.010-rockbox.img.gz (info)
MVR9 LibreELEC-RK3328.arm-8.90.010-box-trn9.img.gz (info)
Z28 LibreELEC-RK3328.arm-8.90.010-box-z28.img.gz (info)
Rockchip RK3399
96rocks ROCK960 LibreELEC-RK3399.arm-8.90.010-rock960.img.gz (info)
PINE64 RockPro64 LibreELEC-RK3399.arm-8.90.010-rockpro64.img.gz (info)
Rockchip Sapphire Board LibreELEC-RK3399.arm-8.90.010-sapphire.img.gz (info)
Rockchip RK3288ASUS Tinker Board LibreELEC-TinkerBoard.arm-8.90.010-rk3288.img.gz (info)
mqmaker MiQi LibreELEC-MiQi.arm-8.90.010-rk3288.img.gz (info)

LibreELEC (Leia) v8.95.1 BETA
-
-
Hey thx , but still unusable for me:
on wetek play 2
sounds are ok , then lauch a movie that trigger passthrough with my receiver , then stop the movie and no sound at all exept if it use passtrough
I must reboot
This bug doesn't exist on coreelec (If it helps)
-
Same for me on Wetek Play 2 (and LePotato) with any DTS passthrough playback, it's been a bug since the early Alpha's unfortunately.
Le Potato HDMI passthrough mode, i have no sound for video with 2.0 channels.LE 8.90.009
-
Thank You for new release.
Thank You for supporting Wetek Core!
Works great with Wetek Core.
Merry Christamas!!!
-
Maybe try coreelec , samebug for you @poweramour ?
I Have another issue with both : pathsubsitution for sources.xml on nfs doesn't work.
-
pathsubsitution for sources.xml on nfs doesn't work.
-
I Have another issue
Also, this is a news/blog article. If you want support, please create your own new thread on the forum.
-
Where can I find the processor S912
-
Where can I find the processor S912
Coreelec
-
Nice build. Everything is working excepts VAAPI at mpeg2 hardware acceleration. I must deactivate VAAPI for mpeg2 (Radeon HD 5450), because computer is hard-crashing or only falling to homescreen (better scenario with DVD playing).
-
Where can I find the processor S912
I'm using this without issue - Test LibreELEC images with KODI-18 for S9xxx
-
Perfect on my NUC! Keep up the good work!
-
Same for me on Wetek Play 2 (and LePotato) with any DTS passthrough playback, it's been a bug since the early Alpha's unfortunately.
Thats sadly not easily fixable without heavy Kodi patching and starting fixing the known very broken kernel codebase for AMLogic 3.14.
We have decided to not do that for K18 because the new kernel codebase is already at the corner and properly fixing the old one takes too much efforts that are basically wasted after K18 (the old way AML Kernel 3.14 is doing things is getting completely removed for K19). There is also a news article about it Development Update – LibreELEC .
-
I've loaded this release on my RPi2. Whenever I try to restore my backup from 8.2.5, it appears to go OK but when it reboots, the restore has not taken place and the initial setup screen appears.
Also when it does run, the audio is out of sync with the video.
Anyone know what's happening and can anyone suggest any work arounds for this problem?
-
Hi, I'm trying to install this version on my Odroid C2. I have tried from several computers and several SD cards but I can not get it started. It gives me kernel panics at the first start. I'm downloading the specific image for Odroid C2. Do we have to do something to install it? The version I currently have is 8.2.5 and I have tried to record it on one of the cards and it works perfectly. I have used both the Libreelec installer and Etcher without any success. A curiosity is that the version 8.2.5 is aarch and the 8.95.1 is arm ... Do you have to do something before starting for the first time once recorded the image on the SD card?
Thanks!!!
-
The update should work, could you describe what kind of error you see?
-
Hi, in first boot the show the logo and first time process, but always stop while checking partition or when resize it. If I reboot it show kernel panics.
I try to use the same SD with 8.2.5 version and works fine. I try different SD cards.
I don't know what can be the problem...
Thanks for your interest CvH
-
Strange, we tested it and it worked.
Could you fresh install 9.0 ? A workaround is to backup via LE Settings Addon, copy backup off the box. Install LE9.0, copy backup to the box and restore it.