FSCK errors with LE 8.09.006

  • I ran into a problem on RPi3. When, after using LE, I check the file system of the sdcard, fsck reports errors. Free blocks and inodes counts wrong. After fixing, these errors disappear. But reappear after launching LE. My sdcard is SanDisk Ultra 16GB. Surface test passed.

  • Sounds like the card has become faulty. Please provide full logs and the output of

    dmesg | paste and

    journalctl | paste

    Please provide a full debug log.

    How to post a log (wiki)

    1. Enable debugging in Settings>System Settings>Logging
    2. Restart Kodi
    3. Replicate the problem.

    Note: Full logs only. No partial or modified logs.

    Do not post your logs directly into the forum, use pastebin.com and post the link.
  • I did fresh install and setup on same reformated (flash erase) card. After setup, I turned off my RPi3 and checked the card for errors. Free blocks and inodes count wrong. fsck fixed that. I did turn on RPi3 for change dvb driver. After reboot I checked fsck again. Only Recovering journal Messege. Card is ok

    dmesg http://ix.io/1ry7

  • Frequent corruption issues are often the result of an inadequate PSU .. the other cause being a card that's on its way out.

  • Why LE doesn't react to these errors during startup (doesn't start fsck)?:/

    Last time I checked fsck was run every time on boot. Not sure why in your case doesn't detect and fix errors.