Quote from balbes150Can you show UART log ?
GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP:1;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP:2;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP:3;EMMC:8;
Quote from balbes150
I temporarily stopped building aarch64. What exact version of the image was used ?
I did a git pull today on your amlogic-master branch. Compiling (ARCH=arm) leads to the same result as above.
Display MoreTest images LibreELEC KODI-18 Leia for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading system is fully compatible with Armbian etc systems for TV boxes. If it is already activated with the previous images, you do not need to repeat the activation.
Dir Leia-18
Test variants of Libreelec KODI-18 (Leia) images for s812.
Hello friend, I have a doubt that I recently installed these programs recently purchased an Amlogic S905X2 Android 9.0 T95Q 4GB RAM 64GB ROM Quad core
What programs are for this model?
thank you
Display MoreThanks!
All is working now
Follow procedure here (worked for me):- There is a lot of info on the net about the multi-boot procedure but I thought I'd try to write it down in steps.
1. Download following file multi-boot fix.zip:-
2. Extract the 2 files from this zip file - "aml_autoscript" and "aml_autoscript.zip"
3. Format SD card (I used rufus) to FAT32.
4. Copy "aml_autoscript" and "aml_autoscript.zip" to this SD card.
5. Turn on android box and boot into android.
6. Insert SD card and then use "Update & Backup" app within android to "select" "aml_autoscript.zip" and then run "update".
7. Box will reboot and make changes to internal u-boot files.
8. When finished, box should reboot to android.
9. Remove SD card and perform normal install of "img.gz" file to SD card using rufus etc.
10. Change "UEnv.ini" and "extlinux.conf" to appropriate dtb (I have S905x box so I used "meson-gxl-s905x-p212.dtb"
11. Insert SD card and turn on box.
12. LibreELEC goes thru install procedure and then reboots into LibreELEC.
tks for the info... but my android does not have menu update.. can you share android or linux command, so i can update aml_autoscript.zip manualy?
In Kodi of the Android, the system informations display 4 Gb
LE correctly shows the real memory size. In Android firmware manufacturers often specifically deceive users, overestimate the real memory size.
I did a git pull today on your amlogic-master branch. Compiling (ARCH=arm) leads to the same result as above.
Show the UART log from the launch of my latest build 20190724. Self-Assembly from GIT can be different.
What programs are for this model?
img.gz
A95x f2 issues:
1. When installed to emmc goes to bootloop after the first reboot.
2. Cpu cores 0 and 1 constantly loaded from 40 to 90%.
Dtb used is x96rmii. Only this one allows ethernet to work along with the internal memory to be seen
When installed to emmc goes to bootloop after the first reboot.
Check this option to work with eMMC.
How to change the gui font color to white?, the black is hard to see for me. Thanks.
the wireless doesn't work with this........and the wired only works if you disable the wireless 
also the reboot doesn't work.....I see the linux output on the screen, gets to 'Reached target Reboot.' but it doesn't reboot....
Hello,
I've booted the latest image on my A95X F2 (s905x2) with 4Gb of RAM / 64 Gb of emmc.The first issue is the amount of RAM: only 3Gb are available.Worst, Kodi crashed when I try to play a x265 video with hardware acceleration activated. I've tried all g12a dtb with no success.
Could you please tell if it is possible to change the hardware acceleration driver?
Thanks
Which video sample are you using? I'd like to try it....
the wireless doesn't work with this........and the wired only works if you disable the wireless
also the reboot doesn't work.....I see the linux output on the screen, gets to 'Reached target Reboot.' but it doesn't reboot....
This DTB I am only interested in working eMMC (installing to eMMC).
tks for the info... but my android does not have menu update.. can you share android or linux command, so i can update aml_autoscript.zip manualy?
Maybe try installing Terminal Emulator under android. Then rinsert SD card, run the TE app and type "reboot update" and enter. That may work.
Which video sample are you using? I'd like to try it....
Hello
I'm not at home.I'll post an sample once I'll be back in two weeks.
Thank you and what is the ram folder for 4gigas for this model
Amlogic S905X2 Android 9.0 T95Q 4GB RAM 64GB ROM Quad core
Quote from balbes150Show the UART log from the launch of my latest build 20190724. Self-Assembly from GIT can be different.
GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP:1;EMMC:800;NAND:81;SD:0;READ:0;CHK:F3;USB:8;LOOP:2;EMMC:800;NA
This DTB I am only interested in working eMMC (installing to eMMC).
As far as I have noticed, libreelec sees internal storage on a95x f2 only at first boot,not depending on dtb.
That's why it goes to bootloop after reboot
I tried this version LE on Mecool KM8 S905X 2G/16GB, new version with wifi/bt chip AP6236
wifi/bt no working, dtb or missing driver issue?
AP6236
BCM43436B0
Remote also does not work
wifi/bt no working, dtb or missing driver issue?
AP6236
BCM43436B0
As BCM43/CYW43 are usually very well supported, I guess it's a dtb issue, but without further info it's hard to guess.
