Does this dvb s2 tuner work?

Nelvin · July 8, 2018 at 1:26 PM

Code

[ 1023.823234] device class 'dvb': registering
[ 1023.836733] bus: 'usb': add driver dw2102
[ 1023.836742] bus: 'usb': driver_probe_device: matched device 3-2:1.0 with driver dw2102
[ 1023.836744] bus: 'usb': really_probe: probing driver dw2102 with device 3-2:1.0
[ 1023.836746] dw2102 3-2:1.0: no default pinctrl state
[ 1023.836749] devices_kset: Moving 3-2:1.0 to end of list
[ 1023.836753] dw2102: su3000_identify_state
[ 1023.836753] dvb-usb: found a 'Terratec Cinergy S2 USB BOX' in warm state.
[ 1023.836756] dw2102: su3000_power_ctrl: 1, initialized 0
[ 1023.836781] device: 'i2c-8': device_add
[ 1023.836786] bus: 'i2c': add device i2c-8
[ 1023.836793] PM: Adding info for i2c:i2c-8
[ 1023.836795] device: 'i2c-8': device_add
[ 1023.836802] PM: Adding info for No Bus:i2c-8
[ 1023.836838] i2c-dev: adapter [Terratec Cinergy S2 USB BOX] registered as minor 8
[ 1023.836855] i2c i2c-8: adapter [Terratec Cinergy S2 USB BOX] registered
[ 1023.836865] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 1023.837236] dvbdev: DVB: registering new adapter (Terratec Cinergy S2 USB BOX)
[ 1023.837239] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.837241] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.837888] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.837889] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.838520] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.838521] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.839189] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.839190] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.839833] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.839834] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.840479] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.840480] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.841137] dvb-usb: MAC address: bc:ea:2b:46:13:a5
[ 1023.841218] device: 'dvb0.demux0': device_add
[ 1023.841229] PM: Adding info for No Bus:dvb0.demux0
[ 1023.841286] dvbdev: dvb_register_device: DVB: register adapter0/demux0 @ minor: 0 (0x00)
[ 1023.841290] device: 'dvb0.dvr0': device_add
[ 1023.841301] PM: Adding info for No Bus:dvb0.dvr0
[ 1023.841488] dvbdev: dvb_register_device: DVB: register adapter0/dvr0 @ minor: 1 (0x01)
[ 1023.841493] device: 'dvb0.net0': device_add
[ 1023.841505] PM: Adding info for No Bus:dvb0.net0
[ 1023.841552] dvbdev: dvb_register_device: DVB: register adapter0/net0 @ minor: 2 (0x02)
[ 1024.165809] bus: 'i2c': add driver m88ds3103
[ 1024.165826] i2c-core: driver [m88ds3103] registered
[ 1024.166013] device: '8-0068': device_add
[ 1024.166020] bus: 'i2c': add device 8-0068
[ 1024.166027] PM: Adding info for i2c:8-0068
[ 1024.166054] bus: 'i2c': driver_probe_device: matched device 8-0068 with driver m88ds3103
[ 1024.166055] bus: 'i2c': really_probe: probing driver m88ds3103 with device 8-0068
[ 1024.166059] m88ds3103 8-0068: no default pinctrl state
[ 1024.166062] devices_kset: Moving 8-0068 to end of list
[ 1024.166063] m88ds3103 8-0068: probe
[ 1024.166076] i2c i2c-8: master_xfer[0] W, addr=0x68, len=1
[ 1024.166078] i2c i2c-8: master_xfer[1] R, addr=0x68, len=1
[ 1024.166247] m88ds3103 8-0068: Unknown device. Chip_id=52
[ 1024.166281] m88ds3103: probe of 8-0068 rejects match -19
[ 1024.166283] i2c i2c-8: client [m88ds3103] registered with bus id 8-0068
[ 1024.166284] dvb-usb: no frontend was attached by 'Terratec Cinergy S2 USB BOX'
[ 1024.167010] Registered IR keymap rc-tt-1500
[ 1024.167016] device: 'rc1': device_add
[ 1024.167032] PM: Adding info for No Bus:rc1
[ 1024.167046] rc rc1: Terratec Cinergy S2 USB BOX as /devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc1
[ 1024.167047] device: 'input18': device_add
[ 1024.167069] PM: Adding info for No Bus:input18
[ 1024.167097] input: Terratec Cinergy S2 USB BOX as /devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc1/input18
[ 1024.167104] device: 'event15': device_add
[ 1024.167113] PM: Adding info for No Bus:event15
[ 1024.167198] device: 'lirc1': device_add
[ 1024.167211] PM: Adding info for No Bus:lirc1
[ 1024.167245] rc rc1: lirc_dev: driver dw2102 registered at minor = 1
[ 1024.167246] dvb-usb: schedule remote query interval to 250 msecs.
[ 1024.167248] dw2102: su3000_power_ctrl: 0, initialized 1
[ 1024.167249] dvb-usb: Terratec Cinergy S2 USB BOX successfully initialized and connected.
[ 1024.167251] driver: 'dw2102': driver_bound: bound to device '3-2:1.0'
[ 1024.167266] bus: 'usb': really_probe: bound device 3-2:1.0 to driver dw2102
[ 1024.167284] usbcore: registered new interface driver dw2102

Display More

**CvH** · July 8, 2018 at 3:54 PM Official Post

still doesn't work i guess ?

btw did you tried the LE image ? btw I would try something - maybe helps

what platform do you need ?

Nelvin · July 14, 2018 at 6:29 AM

CvH You are right. Still not working.

I tried it on an normal x64-machine with kernel 4.17.4. LE should only bei the slave system with the tvheadend client.

I could also be a problem with USB 3.0.

How i can test your work?

**CvH** · August 20, 2018 at 1:12 PM Official Post

Terratec Cinergy S2 USB Box from 2018 is also not working due B chip. Looks like there is no working usb DVB-S2 device for linux anymore.

Catscrash · September 1, 2018 at 10:05 AM

Quote from trsqr

Yes, I still haven't gotten the device and when I asked them, they didn't get back to me anymore.

trsqr where are you located? Do you still need the device? Please give me a PM if so.

Catscrash · September 1, 2018 at 11:27 AM

Did someone try the "TeVii S662 DVB-S2 USB 3.0 komp." yet? Does that one use the M88DS3103B as well?

**CvH** · September 1, 2018 at 1:11 PM Official Post

Quote from Catscrash

Does that one use the M88DS3103B as well?

you can expect that every device with an m88ds3103 has now an b version if it was produced >=2018

**CvH** · September 24, 2018 at 2:28 PM Official Post

testimage that may work

Geniatech Mygica HDStar DVB-S2 USB HD not working

Nelvin · October 4, 2018 at 3:38 PM

Juhu,

with the the patch of crazycat a frontend device is avaiable. Thanks for all CvH and crazycat

Nelvin · October 5, 2018 at 7:13 AM

Everything works fine.

Nelvin · October 5, 2018 at 7:16 AM

Sorry, not everything. In syslog i get many of these messages:

dmxdev: dvb_dvr_poll: dvb_dvr_poll

Softlander · October 5, 2018 at 10:25 AM

CvH crazycat

viewalbum.asp?AID=6784166&IID=279912445

OMG.... It works

check it out
http://ix.io/1on6

Finally after 6 months, I don't know what to say..... Is every thing OK in the Log?

espaun206 · October 18, 2018 at 7:09 AM

I'm about to buy a dvbsky s960 in bettershopping

it will work in libreelec or I will have problems ?

**CvH** · October 18, 2018 at 6:26 PM Official Post

If it is an 2018 version it should work.

GDPR-7 · January 10, 2019 at 11:49 PM

CvH and @Softlander

Btw.: happy new year !

moons ago I made entries under the bold word "Update" regarding linux support for

TerraTec Cinergy S2:

https://www.linuxtv.org/wiki/index.php/terratec_cinergy_s2_r2#update

and

TechnoTrend TT-connect S2-4600:

https://www.linuxtv.org/wiki/index.php/technotrend_tt-connect_s2-4600#update

to prevent other user from buying unsupported/painfull hardware/seller.

Question(s):

=========

Are my statements under the above links still valid or should I remove them ???

@Softlander

from your log in #138 I can't fetch that your usb-tv-stick *is* running, it's waiting for firmware upload...

So my special questions to you are:

Did your device ever finished uploading the firmware !

or even better

Are you ever able to watch TV on it (without driver bugs/hickup's, etc) ?

P.S.

I'm not completely sure, but I guess everyone should be able to change/remove my entries in the above links at LinuxTVWiki if you feel so or if my statements there currently became invalid.

I especially stress the last sentence cause I'm not really often come around this thread any more - is this a correct english wording ? - after switching to an Sat-IP-Server.

Anyhow wiki entries should be correct !

comments/thoughts/rotten fruits

(salutation speech pirated from kernel.org ML's)

**CvH** · January 12, 2019 at 12:51 PM Official Post

This is still valid, the CrazyCat drivers support that drivers.

Also there is work to get it mainline supported.

Hauppauge DVB-S2 461e not supported · Issue #53 · b-rad-NDi/Ubuntu-media-tree-kernel-builder · GitHub

GDPR-7 · January 14, 2019 at 12:10 AM

okay !

please drop me a mail if my statements at LinuxTVWiki become in-valid

or

Are you so kind to change/remove my statements at LinuxTVWiki yourself if things change ???

I'm not really opften here ...

**CvH** · January 14, 2019 at 1:56 AM Official Post

Quote from JoeAverage

Are you so kind to change/remove my statements at LinuxTVWiki yourself if things change ???

If I keep remembering doing I do it