Posts by Nelvin

Nelvin · Does this dvb s2 tuner work? Nelvin April 22, 2019 at 3:48 PM

Any changes here?

Nelvin · Does this dvb s2 tuner work? Nelvin January 22, 2019 at 4:35 AM

Yes, i am german, but i write in english further, for all other people here.

I have a HD+ and SKY DE subcription. On my Wetek Play 2 with Libreelec 8.95.003 everything is fine. SKY DE and HD+ channels are decrypted and working. I try me Wetek Play 2 on the same sat cabel. Same result. It's working perfect.

I tried to record some SKY DE channels on the RasPi to verify, that it not a problem with the streaming settings. Same result. Also the records are bad. I am using TVheadend in the current version.

I have read a thread about this problem with the same error, but for an different usb sat receiver. The solution was to activate the module option transfer mode, but the module dvb_usb_dw2102 has no options for that.

modinfo dvb_usb_dw2102:

parm: demod:demod to probe (1=cx24116 2=stv0903+stv6110 4=stv0903+stb6100(or-able)).

I also tried the demod option, but nothing changed.

Nelvin · Does this dvb s2 tuner work? Nelvin January 21, 2019 at 2:56 PM

GDPR-7

Yes, you are right. Sky is pay-TV, but all HD+ Channels also. So it is no problem mit decryption. This works fine.

Nelvin · Does this dvb s2 tuner work? Nelvin January 21, 2019 at 4:22 AM

Hi Folks.

unfortunately not everything works fine. If i tune to HD+ or german public television everything is ok, but Sky DE Channels won´t work.

Quote

2019-01-21 05:06:41.508 TS: Astra/12304.5H/SYFY HD: H264 @ #511 Continuity counter error (total 1)

2019-01-21 05:06:41.508 TS: Astra/12304.5H/SYFY HD: AC3 @ #515 Continuity counter error (total 1)

2019-01-21 05:06:45.964 tbl-base: sdt: 12304.5H in Astra: invalid checksum (len 778, errors 1)

2019-01-21 05:06:45.990 tbl-pass: pass-sdt: -: invalid checksum (len 778, errors 1)

I try my Wetek Play 2 on the same sat-cable. Everything works fine. Only my RasPi with Libreelec 8,95.003 is not able to stream without artefacts.(I use CrazyCats (TBS) DVB driver.

Nelvin · Does this dvb s2 tuner work? Nelvin October 5, 2018 at 7:16 AM

Sorry, not everything. In syslog i get many of these messages:

dmxdev: dvb_dvr_poll: dvb_dvr_poll

Nelvin · Does this dvb s2 tuner work? Nelvin October 5, 2018 at 7:13 AM

Everything works fine.

Nelvin · Does this dvb s2 tuner work? Nelvin October 4, 2018 at 3:38 PM

Juhu,

with the the patch of crazycat a frontend device is avaiable. Thanks for all CvH and crazycat

Nelvin · Does this dvb s2 tuner work? Nelvin July 14, 2018 at 6:29 AM

CvH You are right. Still not working.

I tried it on an normal x64-machine with kernel 4.17.4. LE should only bei the slave system with the tvheadend client.

I could also be a problem with USB 3.0.

How i can test your work?

Nelvin · Does this dvb s2 tuner work? Nelvin July 8, 2018 at 1:26 PM

Code

[ 1023.823234] device class 'dvb': registering
[ 1023.836733] bus: 'usb': add driver dw2102
[ 1023.836742] bus: 'usb': driver_probe_device: matched device 3-2:1.0 with driver dw2102
[ 1023.836744] bus: 'usb': really_probe: probing driver dw2102 with device 3-2:1.0
[ 1023.836746] dw2102 3-2:1.0: no default pinctrl state
[ 1023.836749] devices_kset: Moving 3-2:1.0 to end of list
[ 1023.836753] dw2102: su3000_identify_state
[ 1023.836753] dvb-usb: found a 'Terratec Cinergy S2 USB BOX' in warm state.
[ 1023.836756] dw2102: su3000_power_ctrl: 1, initialized 0
[ 1023.836781] device: 'i2c-8': device_add
[ 1023.836786] bus: 'i2c': add device i2c-8
[ 1023.836793] PM: Adding info for i2c:i2c-8
[ 1023.836795] device: 'i2c-8': device_add
[ 1023.836802] PM: Adding info for No Bus:i2c-8
[ 1023.836838] i2c-dev: adapter [Terratec Cinergy S2 USB BOX] registered as minor 8
[ 1023.836855] i2c i2c-8: adapter [Terratec Cinergy S2 USB BOX] registered
[ 1023.836865] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 1023.837236] dvbdev: DVB: registering new adapter (Terratec Cinergy S2 USB BOX)
[ 1023.837239] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.837241] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.837888] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.837889] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.838520] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.838521] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.839189] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.839190] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.839833] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.839834] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.840479] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2
[ 1023.840480] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1
[ 1023.841137] dvb-usb: MAC address: bc:ea:2b:46:13:a5
[ 1023.841218] device: 'dvb0.demux0': device_add
[ 1023.841229] PM: Adding info for No Bus:dvb0.demux0
[ 1023.841286] dvbdev: dvb_register_device: DVB: register adapter0/demux0 @ minor: 0 (0x00)
[ 1023.841290] device: 'dvb0.dvr0': device_add
[ 1023.841301] PM: Adding info for No Bus:dvb0.dvr0
[ 1023.841488] dvbdev: dvb_register_device: DVB: register adapter0/dvr0 @ minor: 1 (0x01)
[ 1023.841493] device: 'dvb0.net0': device_add
[ 1023.841505] PM: Adding info for No Bus:dvb0.net0
[ 1023.841552] dvbdev: dvb_register_device: DVB: register adapter0/net0 @ minor: 2 (0x02)
[ 1024.165809] bus: 'i2c': add driver m88ds3103
[ 1024.165826] i2c-core: driver [m88ds3103] registered
[ 1024.166013] device: '8-0068': device_add
[ 1024.166020] bus: 'i2c': add device 8-0068
[ 1024.166027] PM: Adding info for i2c:8-0068
[ 1024.166054] bus: 'i2c': driver_probe_device: matched device 8-0068 with driver m88ds3103
[ 1024.166055] bus: 'i2c': really_probe: probing driver m88ds3103 with device 8-0068
[ 1024.166059] m88ds3103 8-0068: no default pinctrl state
[ 1024.166062] devices_kset: Moving 8-0068 to end of list
[ 1024.166063] m88ds3103 8-0068: probe
[ 1024.166076] i2c i2c-8: master_xfer[0] W, addr=0x68, len=1
[ 1024.166078] i2c i2c-8: master_xfer[1] R, addr=0x68, len=1
[ 1024.166247] m88ds3103 8-0068: Unknown device. Chip_id=52
[ 1024.166281] m88ds3103: probe of 8-0068 rejects match -19
[ 1024.166283] i2c i2c-8: client [m88ds3103] registered with bus id 8-0068
[ 1024.166284] dvb-usb: no frontend was attached by 'Terratec Cinergy S2 USB BOX'
[ 1024.167010] Registered IR keymap rc-tt-1500
[ 1024.167016] device: 'rc1': device_add
[ 1024.167032] PM: Adding info for No Bus:rc1
[ 1024.167046] rc rc1: Terratec Cinergy S2 USB BOX as /devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc1
[ 1024.167047] device: 'input18': device_add
[ 1024.167069] PM: Adding info for No Bus:input18
[ 1024.167097] input: Terratec Cinergy S2 USB BOX as /devices/pci0000:00/0000:00:14.0/usb3/3-2/rc/rc1/input18
[ 1024.167104] device: 'event15': device_add
[ 1024.167113] PM: Adding info for No Bus:event15
[ 1024.167198] device: 'lirc1': device_add
[ 1024.167211] PM: Adding info for No Bus:lirc1
[ 1024.167245] rc rc1: lirc_dev: driver dw2102 registered at minor = 1
[ 1024.167246] dvb-usb: schedule remote query interval to 250 msecs.
[ 1024.167248] dw2102: su3000_power_ctrl: 0, initialized 1
[ 1024.167249] dvb-usb: Terratec Cinergy S2 USB BOX successfully initialized and connected.
[ 1024.167251] driver: 'dw2102': driver_bound: bound to device '3-2:1.0'
[ 1024.167266] bus: 'usb': really_probe: bound device 3-2:1.0 to driver dw2102
[ 1024.167284] usbcore: registered new interface driver dw2102

Display More

Nelvin · Does this dvb s2 tuner work? Nelvin July 8, 2018 at 12:47 PM

Hat geklappt. Ich werde mal sehen, was das debuggen macht

Nelvin · Does this dvb s2 tuner work? Nelvin July 8, 2018 at 12:46 PM

CvH

Welchen Kernel hast Du benutzt? Ich versuche gerade den Patch in den aktuellen Kernel 4.17.4 einzuspielen, aber es kommen nur Fehlermeldungen.

Ja, Du hast Recht. Ich habe es auch gerade gemerkt, dass es Dein Patch ist

Nelvin · Does this dvb s2 tuner work? Nelvin July 8, 2018 at 7:36 AM

I found a new patch. But i can't test it. I will try later

[diff] m88ds3103b.patch - CodeGist

Nelvin · Does this dvb s2 tuner work? Nelvin May 12, 2018 at 8:14 PM

Hi Guys,

i try to debug this problem to help to solve this problem.

Here are all debug messages you need:

Quote

usbmon:

ffff9c9992cf3e40 438884360 S Bo:3:002:1 -115 3 = 0e0401

ffff9c9992cf3e40 438884382 C Bo:3:002:1 0 3 >

ffff9c9992cf3e40 438884389 S Bi:3:002:1 -115 1 <

ffff9c9992cf3e40 438884420 C Bi:3:002:1 0 1 = 01

ffff9c9993fe3d80 438912100 S Bo:3:002:1 -115 3 = 0e8300

ffff9c9993fe3d80 438912131 C Bo:3:002:1 0 3 >

ffff9c9993fe3d80 438912147 S Bi:3:002:1 -115 1 <

ffff9c9993fe3d80 438912165 C Bi:3:002:1 0 1 = 01

ffff9c99585c8780 438912178 S Bo:3:002:1 -115 3 = 0ec001

ffff9c99585c8780 438912205 C Bo:3:002:1 0 3 >

ffff9c99585c8780 438912210 S Bi:3:002:1 -115 1 <

ffff9c99585c8780 438912303 C Bi:3:002:1 0 1 = 01

ffff9c99585c8780 439020110 S Bo:3:002:1 -115 3 = 0e8301

ffff9c99585c8780 439020145 C Bo:3:002:1 0 3 >

ffff9c99585c8780 439020159 S Bi:3:002:1 -115 1 <

ffff9c99585c8780 439020178 C Bi:3:002:1 0 1 = 01

ffff9c99585c8780 439020189 S Bo:3:002:1 -115 3 = 0ec000

ffff9c99585c8780 439020218 C Bo:3:002:1 0 3 >

ffff9c99585c8780 439020229 S Bi:3:002:1 -115 1 <

ffff9c99585c8780 439020308 C Bi:3:002:1 0 1 = 01

ffff9c99585c89c0 439080451 S Bo:3:002:1 -115 6 = 09020651 1e00

ffff9c99585c89c0 439080484 C Bo:3:002:1 0 6 >

ffff9c99585c89c0 439080496 S Bi:3:002:1 -115 7 <

ffff9c99585c89c0 439081664 C Bi:3:002:1 0 7 = 08ffffff ffffff

ffff9c99585c8cc0 439082310 S Bo:3:002:1 -115 5 = 09010168 00

ffff9c99585c8cc0 439082340 C Bo:3:002:1 0 5 >

ffff9c99585c8cc0 439082351 S Bi:3:002:1 -115 2 <

ffff9c99585c8cc0 439082497 C Bi:3:002:1 0 2 = 07ff

DVB_USB_DVBSKY

dmesg:

[ 104.696869] bus: 'i2c': add driver m88ds3103

[ 104.696882] i2c-core: driver [m88ds3103] registered

[ 104.706641] bus: 'usb': add driver dvb_usb_dvbsky

[ 104.706648] bus: 'usb': driver_probe_device: matched device 3-1:1.0 with driver dvb_usb_dvbsky

[ 104.706650] bus: 'usb': really_probe: probing driver dvb_usb_dvbsky with device 3-1:1.0

[ 104.706653] dvb_usb_dvbsky 3-1:1.0: no default pinctrl state

[ 104.706656] devices_kset: Moving 3-1:1.0 to end of list

[ 104.904400] usb 3-1: dvb_usb_v2: found a 'Terratec Cinergy S2 Rev.4' in warm state

[ 104.904420] device: 'i2c-8': device_add

[ 104.904444] bus: 'i2c': add device i2c-8

[ 104.904466] PM: Adding info for i2c:i2c-8

[ 104.904476] device: 'i2c-8': device_add

[ 104.904529] PM: Adding info for No Bus:i2c-8

[ 104.904730] i2c-dev: adapter [Terratec Cinergy S2 Rev.4] registered as minor 8

[ 104.904785] i2c i2c-8: adapter [Terratec Cinergy S2 Rev.4] registered

[ 104.904827] usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer

[ 104.904849] dvbdev: DVB: registering new adapter (Terratec Cinergy S2 Rev.4)

[ 104.904858] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2

[ 104.904865] i2c i2c-8: master_xfer[1] R, addr=0x51, len=6

[ 104.906142] usb 3-1: dvb_usb_v2: MAC address: ff:ff:ff:ff:ff:ff

[ 104.906355] device: 'dvb0.demux0': device_add

[ 104.906422] PM: Adding info for No Bus:dvb0.demux0

[ 104.906551] dvbdev: dvb_register_device: DVB: register adapter0/demux0 @ minor: 0 (0x00)

[ 104.906562] device: 'dvb0.dvr0': device_add

[ 104.906598] PM: Adding info for No Bus:dvb0.dvr0

[ 104.907405] dvbdev: dvb_register_device: DVB: register adapter0/dvr0 @ minor: 1 (0x01)

[ 104.907419] device: 'dvb0.net0': device_add

[ 104.907458] PM: Adding info for No Bus:dvb0.net0

[ 104.907612] dvbdev: dvb_register_device: DVB: register adapter0/net0 @ minor: 2 (0x02)

[ 104.907643] device: '8-0068': device_add

[ 104.907665] bus: 'i2c': add device 8-0068

[ 104.907708] PM: Adding info for i2c:8-0068

[ 104.907802] bus: 'i2c': driver_probe_device: matched device 8-0068 with driver m88ds3103

[ 104.907808] bus: 'i2c': really_probe: probing driver m88ds3103 with device 8-0068

[ 104.907819] m88ds3103 8-0068: no default pinctrl state

[ 104.907834] devices_kset: Moving 8-0068 to end of list

[ 104.907840] m88ds3103 8-0068: probe

[ 104.907883] i2c i2c-8: master_xfer[0] W, addr=0x68, len=1

[ 104.907890] i2c i2c-8: master_xfer[1] R, addr=0x68, len=1

[ 104.908086] m88ds3103 8-0068: Unknown device. Chip_id=7f

[ 104.908246] m88ds3103: probe of 8-0068 rejects match -19

[ 104.908259] i2c i2c-8: client [m88ds3103] registered with bus id 8-0068

[ 104.908273] usb 3-1: dvbsky_s960_attach fail.

[ 104.908393] device: 'dvb0.net0': device_unregister

[ 104.908490] PM: Removing info for No Bus:dvb0.net0

[ 104.908530] device: 'dvb0.net0': device_create_release

[ 104.908537] device: 'dvb0.demux0': device_unregister

[ 104.908624] PM: Removing info for No Bus:dvb0.demux0

[ 104.908656] device: 'dvb0.demux0': device_create_release

[ 104.908661] device: 'dvb0.dvr0': device_unregister

[ 104.908741] PM: Removing info for No Bus:dvb0.dvr0

[ 104.908774] device: 'dvb0.dvr0': device_create_release

[ 104.908928] device: '8-0068': device_unregister

[ 104.908964] bus: 'i2c': remove device 8-0068

[ 104.908967] PM: Removing info for i2c:8-0068

[ 104.908998] i2c i2c-8: adapter [Terratec Cinergy S2 Rev.4] unregistered

[ 104.909002] device: 'i2c-8': device_unregister

[ 104.909010] device: 'i2c-8': device_unregister

[ 104.909114] PM: Removing info for No Bus:i2c-8

[ 104.909144] device: 'i2c-8': device_create_release

[ 104.909147] i2c-dev: adapter [Terratec Cinergy S2 Rev.4] unregistered

[ 104.909175] bus: 'i2c': remove device i2c-8

[ 104.909177] PM: Removing info for i2c:i2c-8

[ 104.909206] dvb_usb_dvbsky: probe of 3-1:1.0 rejects match -19

[ 104.909250] usbcore: registered new interface driver dvb_usb_dvbsky

modinfo dvb-usb_v2

filename: /lib/modules/4.17.0-rc4+/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_v2.ko

license: GPL

description: DVB USB common

author: Antti Palosaari <[email protected]>

author: Patrick Boettcher <[email protected]>

version: 2.0

srcversion: 7C66E0F1175324A7E6FA568

depends: dvb-core

retpoline: Y

intree: Y

name: dvb_usb_v2

vermagic: 4.17.0-rc4+ SMP mod_unload

parm: disable_rc_polling:disable remote control polling (default: 0) (int)

parm: force_pid_filter_usage:force all DVB USB devices to use a PID filter, if any (default: 0) (int)

modinfo m88ds3103

filename: /lib/modules/4.17.0-rc4+/kernel/drivers/media/dvb-frontends/m88ds3103.ko

firmware: dvb-demod-m88rs6000.fw

firmware: dvb-demod-m88ds3103.fw

license: GPL

description: Montage Technology M88DS3103 DVB-S/S2 demodulator driver

author: Antti Palosaari <[email protected]>

srcversion: 83B1A072E2FBF4E5D2ECECD

alias: i2c:m88ds3103

depends: dvb-core

retpoline: Y

intree: Y

name: m88ds3103

vermagic: 4.17.0-rc4+ SMP mod_unload

modinfo dvb_usb_dvbsky

filename: /lib/modules/4.17.0-rc4+/kernel/drivers/media/usb/dvb-usb-v2/dvb-usb-dvbsky.ko

license: GPL

description: Driver for DVBSky USB

author: Max nibble <[email protected]>

srcversion: 34EF111508ABF278A56946D

alias: usb:v0572pC689d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0CCDp0105d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0CCDp10A5d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0B48p3017d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0B48p3015d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0B48p3012d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0B48p3014d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0572p0320d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0572p680Cd*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0572p960Cd*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0572p6831d*dc*dsc*dp*ic*isc*ip*in*

depends: dvb_usb_v2,dvb-core,m88ds3103

retpoline: Y

intree: Y

name: dvb_usb_dvbsky

vermagic: 4.17.0-rc4+ SMP mod_unload

parm: disable_rc:Disable inbuilt IR receiver. (int)

parm: adapter_nr:DVB adapter numbers (array of short)

DVB_USB_DW2102:

dmesg:

633.238119] device class 'dvb': registering

633.252178] bus: 'usb': add driver dw2102

633.252187] bus: 'usb': driver_probe_device: matched device 3-1:1.0 with driver dw2102

633.252188] bus: 'usb': really_probe: probing driver dw2102 with device 3-1:1.0

633.252191] dw2102 3-1:1.0: no default pinctrl state

633.252195] devices_kset: Moving 3-1:1.0 to end of list

633.252198] check for cold 4b4 2102

633.252199] check for cold 4b4 2101

633.252199] check for cold ccd 64

633.252200] check for cold 4b4 2104

633.252200] check for cold 9022 d650

633.252201] check for cold 4b4 3101

633.252201] check for cold 9022 d630

633.252202] check for cold 3011 b012

633.252202] check for cold 9022 d660

633.252202] check for cold 9022 d481

633.252203] check for cold 9022 d482

633.252203] check for cold 3034 7500

633.252204] check for cold 9022 d421

633.252204] check for cold 9022 d632

633.252205] check for cold 1f4d 3000

633.252205] check for cold ccd a8

633.252206] check for cold 1f4d 3100

633.252206] check for cold ccd b0

633.252206] check for cold ccd 102

633.252207] check for cold 1fe1 5456

633.252207] check for cold 1f4d d220

633.252208] check for cold b48 3011

633.252208] check for cold 9022 d483

633.252208] check for cold 9022 d484

633.252209] check for cold ccd 105

633.252209] dw2102: su3000_identify_state

633.252210] dvb-usb: found a 'Terratec Cinergy S2 USB BOX' in warm state.

633.252212] power control: 1

633.252212] dw2102: su3000_power_ctrl: 1, initialized 0

633.252239] device: 'i2c-8': device_add

633.252244] bus: 'i2c': add device i2c-8

633.252250] PM: Adding info for i2c:i2c-8

633.252252] device: 'i2c-8': device_add

633.252260] PM: Adding info for No Bus:i2c-8

633.252303] i2c-dev: adapter [Terratec Cinergy S2 USB BOX] registered as minor 8

633.252326] i2c i2c-8: adapter [Terratec Cinergy S2 USB BOX] registered

633.252333] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.

633.252703] dvbdev: DVB: registering new adapter (Terratec Cinergy S2 USB BOX)

633.252707] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2

633.252708] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1

633.253380] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2

633.253381] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1

633.254106] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2

633.254112] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1

633.254765] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2

633.254766] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1

633.255462] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2

633.255464] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1

633.256153] i2c i2c-8: master_xfer[0] W, addr=0x51, len=2

633.256154] i2c i2c-8: master_xfer[1] R, addr=0x51, len=1

633.256839] dvb-usb: MAC address: bc:ea:2b:46:13:a5

633.256946] device: 'dvb0.demux0': device_add

633.256956] PM: Adding info for No Bus:dvb0.demux0

633.257236] dvbdev: dvb_register_device: DVB: register adapter0/demux0 @ minor: 0 (0x00)

633.257239] device: 'dvb0.dvr0': device_add

633.257248] PM: Adding info for No Bus:dvb0.dvr0

633.257459] dvbdev: dvb_register_device: DVB: register adapter0/dvr0 @ minor: 1 (0x01)

633.257464] device: 'dvb0.net0': device_add

633.257474] PM: Adding info for No Bus:dvb0.net0

633.257523] dvbdev: dvb_register_device: DVB: register adapter0/net0 @ minor: 2 (0x02)

633.575096] bus: 'i2c': add driver m88ds3103

633.575127] i2c-core: driver [m88ds3103] registered

633.575353] device: '8-0068': device_add

633.575369] bus: 'i2c': add device 8-0068

633.575389] PM: Adding info for i2c:8-0068

633.575448] bus: 'i2c': driver_probe_device: matched device 8-0068 with driver m88ds3103

633.575453] bus: 'i2c': really_probe: probing driver m88ds3103 with device 8-0068

633.575460] m88ds3103 8-0068: no default pinctrl state

633.575468] devices_kset: Moving 8-0068 to end of list

633.575472] m88ds3103 8-0068: probe

633.575500] i2c i2c-8: master_xfer[0] W, addr=0x68, len=1

633.575504] i2c i2c-8: master_xfer[1] R, addr=0x68, len=1

633.575698] m88ds3103 8-0068: Unknown device. Chip_id=52

633.575797] m88ds3103: probe of 8-0068 rejects match -19

633.575805] i2c i2c-8: client [m88ds3103] registered with bus id 8-0068

633.575808] dvb-usb: no frontend was attached by 'Terratec Cinergy S2 USB BOX'

633.576660] Registered IR keymap rc-tt-1500

633.576668] device: 'rc1': device_add

633.576690] PM: Adding info for No Bus:rc1

633.576722] rc rc1: Terratec Cinergy S2 USB BOX as /devices/pci0000:00/0000:00:14.0/usb3/3-1/rc/rc1

633.576725] device: 'input21': device_add

633.576772] PM: Adding info for No Bus:input21

633.576822] input: Terratec Cinergy S2 USB BOX as /devices/pci0000:00/0000:00:14.0/usb3/3-1/rc/rc1/input21

633.576834] device: 'event15': device_add

633.576856] PM: Adding info for No Bus:event15

633.576974] device: 'lirc1': device_add

633.576998] PM: Adding info for No Bus:lirc1

633.577065] rc rc1: lirc_dev: driver dw2102 registered at minor = 1

633.577068] dvb-usb: schedule remote query interval to 250 msecs.

633.577070] power control: 0

633.577073] dw2102: su3000_power_ctrl: 0, initialized 1

633.577075] dvb-usb: Terratec Cinergy S2 USB BOX successfully initialized and connected.

633.577079] driver: 'dw2102': driver_bound: bound to device '3-1:1.0'

633.577111] bus: 'usb': really_probe: bound device 3-1:1.0 to driver dw2102

633.577150] usbcore: registered new interface driver dw2102

modinfo dvb_usb

filename: /lib/modules/4.17.0-rc4+/kernel/drivers/media/usb/dvb-usb/dvb-usb.ko

license: GPL

description: A library module containing commonly used USB and DVB function USB DVB devices

author: Patrick Boettcher <[email protected]>

version: 1.0

srcversion: C767DD345E8612531CC1E3B

depends: dvb-core

retpoline: Y

intree: Y

name: dvb_usb

vermagic: 4.17.0-rc4+ SMP mod_unload

parm: debug:set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64,mem=128,uxfer=256 (or-able)). (int)

parm: disable_rc_polling:disable remote control polling (default: 0). (int)

parm: force_pid_filter_usage:force all dvb-usb-devices to use a PID filter, if any (default: 0). (int)

modinfo dvb_usb_dw2102

filename: /lib/modules/4.17.0-rc4+/kernel/drivers/media/usb/dvb-usb/dvb-usb-dw2102.ko

firmware: dvb-usb-p7500.fw

firmware: dvb-usb-p1100.fw

firmware: dvb-usb-s660.fw

firmware: dvb-usb-s630.fw

firmware: dvb-usb-dw3101.fw

firmware: dvb-usb-dw2104.fw

firmware: dvb-usb-dw2102.fw

firmware: dvb-usb-dw2101.fw

license: GPL

version: 0.1

description: Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101 USB2.0, TeVii S421, S480, S482, S600, S630, S632, S650, TeVii S660, S662, Prof 1100, 7500 USB2.0, Geniatech SU3000, T220, TechnoTrend S2-4600, Terratec Cinergy S2 devices

author: Igor M. Liplianin (c) [email protected]

srcversion: BBCCF20C0020DF4156C8973

alias: usb:v9022pD662d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0CCDp0105d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v9022pD484d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v9022pD483d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0B48p3011d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v1F4DpD220d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v1FE1p5456d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0CCDp0105d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0CCDp0102d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0CCDp00B0d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v9022pD632d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v9022pD421d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v1F4Dp3100d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v9022pD482d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v9022pD481d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0CCDp00A8d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v1F4Dp3000d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v3034p7500d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v9022pD660d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v3011pB012d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v9022pD630d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v04B4p3101d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v0CCDp0064d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v9022pD650d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v04B4p2104d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v04B4p2101d*dc*dsc*dp*ic*isc*ip*in*

alias: usb:v04B4p2102d*dc*dsc*dp*ic*isc*ip*in*

depends: dvb-usb,dvb-core

retpoline: Y

intree: Y

name: dvb_usb_dw2102

vermagic: 4.17.0-rc4+ SMP mod_unload

parm: debug:set debugging level (1=info 2=xfer 4=rc(or-able)). (int)

parm: demod:demod to probe (1=cx24116 2=stv0903+stv6110 4=stv0903+stb6100(or-able)). (int)

parm: adapter_nr:DVB adapter numbers (array of short)

uname -r

4.17.0-rc4+

Display More