I have some news . Im able to decompile my le dtb.img and adding the fd628 codes into.
Now it start but (offcourse) without the lcd cause i dont know the right values from gpio pin
In some other post the friend the cooler say me about it. but i dont understand well.
Where im looking for put my values? I think this is the only i miss for working this clock
Just following up from my post about TVHeadend 4.3 from [8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro
I've reinstalled using Raybuntu's build of 4.2 from Index of /addons/9.0.6/S905/arm/service.tvheadend42/ and all my channels can be found again so the issue I'm having seems to be coming from TVH4.3. Is it possible for a 4.2 build to be made available on the LE repo for the time being? I don't know how widespread an issue it is, if it's just affecting a few of us maybe just worth sticking with Raybuntu's build.
Please attach the DTS file and I'll see if I can help you.
You have a T95M 1GB RAM?
Also post dmesg log. (SSH into the box, type in 'dmesg | paste'. Then copy the link here.
Hi i have one problem with HDMI if my tv is off and i power on tv box first and then tv i dont get image on screen i only have black screen cec in not pressent on tv when i was runing libre on pi i was able to add some strings to config file in order that hdmi is always active can this be done also on s912 build
Please attach the DTS file and I'll see if I can help you.
You have a T95M 1GB RAM?
Also post dmesg log. (SSH into the box, type in 'dmesg | paste'. Then copy the link here.
here i'm this is the link at my dmesg. I just realize that the wifi dont work , however is not a problem cause ever i prefer ethernet 
Ok, try this one.
Ok, try this one.
sintax error when i try to dtc
add ; after fd628_display_type = /bits/ 32 <1>
It has to be like this:
fd628_display_type = /bits/ 32 <1>;
add ; after fd628_display_type = /bits/ 32 <1>
It has to be like this:
fd628_display_type = /bits/ 32 <1>;
i do it. start but ever with no lcd . the dmesg with actual i just see that havent any fd628 references
Ok, can you post the device tree folder from Android?
Ok, can you post the device tree folder from Android?
how i can do ? directy from nand or from a ota update ?
1. Boot into Android.
2. Use 'Root Explorer' to go to /proc/device-tree/fd628_dev.
3. Copy this folder, make sure that the files are not empty, zip it and post it.
The DTS I sent is almost correct (no dmesg errors), now we just need to know which pins the LCD is connected to on the SoC. The device tree in Android will tell us that.
1. Boot into Android.
2. Use 'Root Explorer' to go to /proc/device-tree/fd628_aml' (or something with fd628).
3. Copy this folder, zip it and post it.
The DTS I sent is almost correct (no dmesg errors), now we just need to know which pins the LCD is connected to on the SoC. The device tree in Android will tell us that.
Just following up from my post about TVHeadend 4.3 from [8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro
I've reinstalled using Raybuntu's build of 4.2 from Index of /addons/9.0.6/S905/arm/service.tvheadend42/ and all my channels can be found again so the issue I'm having seems to be coming from TVH4.3. Is it possible for a 4.2 build to be made available on the LE repo for the time being? I don't know how widespread an issue it is, if it's just affecting a few of us maybe just worth sticking with Raybuntu's build.
TVH 4.2.5-18 service.tvheadend42-9.0.117x.zip.
TVH 4.2 is downgrade incompatible with TVH 4.3. If you are downgrading from 4.3 you have to remove all data.
TVH 4.2.5-18 service.tvheadend42-9.0.117x.zip.
TVH 4.2 is downgrade incompatible with TVH 4.3. If you are downgrading from 4.3 you have to remove all data.
Thanks, that versions is working for me. There must be something about 4.3 that my setup doesn't like.
The files are empty. Make sure you copy the folder properly out of android before you zip it.
The files are empty. Make sure you copy the folder properly out of android before you zip it.
im sorry try this one
and this maybe is the dtb extracted from android
Sorry to say, but the DTB I sent earlier today should work. The values look identical to my box.
There are no kernel errors. Both the extracted DTB and the fd628_dev confirm this.
Pins are clk = 5, dat = 4, stb = 3 on the gpio-ao port.
