Hyperion make lags by HEVC movies

Mister XY · June 5, 2017 at 10:17 PM

Hello, i have an Problem with my Odroid C2 and Hyperion. Hyperion generated jutter/lags with my HEVC movies.

I have tested it also woth another Amlogic devic with 905 chip and have the same error. I use in that case an build from kszaq.

This Error comes after 20-40 Minutes.

I have also tested with Boblight and Boblight have this error not.

If i deactivate Hyperion, the movies play fine. If activated, i have the Error.

Without debug, i have this in Kodi.log

08:46:36.973 T:3421074336 NOTICE: CVideoPlayerAudio::Process - stream stalled

And this error comes only with activated Hyperion Addon.

And i always get the newest from Repo.

I'm using Hyperion with an Adruino and ws2801 Stripes.

After a while i get very often this in my debug log.

Code

22:00:39.016 T:3745510304   DEBUG: CVideoPlayerVideo::CalcDropRequirement - hurry: 1
22:00:39.026 T:3745510304   DEBUG: CAMLCodec::Decode: ret: 2, sz: 18024, dts_in: 18442240474082.1797[3AC4538], pts_in: 684.6840[3AC4538], adj:0, ptsOut:681.7640, amlpts:61358760, idx:16344, timesize:1.9603
22:00:39.026 T:3745510304   DEBUG: CVideoPlayerVideo::CalcDropRequirement - hurry: 1
22:00:39.033 T:4116299776   DEBUG: CAMLCodec::ReleaseFrame idx:16344
22:00:39.036 T:3745510304   DEBUG: CAMLCodec::Decode: ret: 0, sz: 5349, dts_in: 18442240474082.1797[3AC27B0], pts_in: 684.6000[3AC27B0], adj:0, ptsOut:681.7640, amlpts:61358760, idx:16344, timesize:2.0020
22:00:39.047 T:3745510304   DEBUG: CAMLCodec::Decode: ret: 0, sz: 0, dts_in: 18442240474082.1797[3AC27B0], pts_in: 18442240474082.1797[3AC27B0], adj:0, ptsOut:681.7640, amlpts:61358760, idx:16344, timesize:2.0437
22:00:39.047 T:3745510304   DEBUG: CAMLCodec::Decode: ret: 4, sz: 0, dts_in: 18442240474082.1797[3AC27B0], pts_in: 18442240474082.1797[3AC27B0], adj:0, ptsOut:681.8060, amlpts:61362540, idx:16345, timesize:2.0020
22:00:39.057 T:3745510304   DEBUG: CAMLCodec::Decode: ret: 0, sz: 0, dts_in: 18442240474082.1797[3AC27B0], pts_in: 18442240474082.1797[3AC27B0], adj:0, ptsOut:681.8060, amlpts:61362540, idx:16345, timesize:2.0020
22:00:39.074 T:4116299776   DEBUG: Previous line repeats 1 times.
22:00:39.075 T:4116299776   DEBUG: CAMLCodec::ReleaseFrame idx:16345
22:00:39.077 T:3745510304   DEBUG: CAMLCodec::Decode: ret: 0, sz: 0, dts_in: 18442240474082.1797[3AC27B0], pts_in: 18442240474082.1797[3AC27B0], adj:0, ptsOut:681.8060, amlpts:61362540, idx:16345, timesize:2.0020
22:00:39.087 T:3745510304   DEBUG: Previous line repeats 1 times.
22:00:39.087 T:3745510304   DEBUG: CAMLCodec::Decode: ret: 4, sz: 0, dts_in: 18442240474082.1797[3AC27B0], pts_in: 18442240474082.1797[3AC27B0], adj:0, ptsOut:681.8470, amlpts:61366230, idx:16346, timesize:1.9603
22:00:39.097 T:3745510304   DEBUG: CAMLCodec::Decode: ret: 2, sz: 0, dts_in: 18442240474082.1797[3AC27B0], pts_in: 18442240474082.1797[3AC27B0], adj:0, ptsOut:681.8470, amlpts:61366230, idx:16346, timesize:1.9603
22:00:39.098 T:3745510304   DEBUG: CVideoPlayerVideo::CalcDropRequirement - hurry: 1
22:00:39.108 T:3745510304   DEBUG: CAMLCodec::Decode: ret: 2, sz: 2085, dts_in: 18442240474082.1797[3AC18EC], pts_in: 684.5580[3AC18EC], adj:0, ptsOut:681.8470, amlpts:61366230, idx:16346, timesize:1.9603
22:00:39.108 T:3745510304   DEBUG: CVideoPlayerVideo::CalcDropRequirement - hurry: 1
22:00:39.116 T:4116299776   DEBUG: CAMLCodec::ReleaseFrame idx:16346

Display More

Zippyshare.com - kodilogoffi.zip

Mister XY · June 7, 2017 at 9:25 AM

Ok not only by HEVC Movies. Also by X264 Movies. Same error. Anything must be wrong with Hyperion. I have also tested it by a fresh installed Libreelec. I have only installed Hyperion and have the same error.

Ottie · June 19, 2017 at 10:33 AM

Do you use the Libreelec Hyperion Addon??

I had the same issue with the Libreelec Hyperion Addon, I removed the addon and installed the "normal" hyperion via the "normal" hypercon tool and now the stuttering is gone.

lupus11 · June 19, 2017 at 1:17 PM

I have the same configuration and the same issue.

I used the Libre Elec Hyperion Addon.

Installation of the "normal" hyperion was not possible, as there was no option for C2 hardware:

ssh out: cd /tmp && curl -# -k -L --output install_hyperion.sh --get install_hyperion.sh && sh ./install_hyperion.sh HyperConInstall ; rm install_hyperion.sh

ssh out: ######################################################################## 100.0%

ssh in: *******************************************************************************

ssh in: This script will install/update Hyperion Ambient Light

ssh in: Created by brindosch - hyperion-project.org - the official Hyperion source.

ssh in: *******************************************************************************

ssh in: ---> Critical Error: CPU information does not match any known releases -> abort

Am I missing something ?

Mister XY · June 25, 2017 at 8:28 AM

Ok very nice, that other people has the same error. But it's not so nice, that no one care about the bug.

**Klojum** · June 25, 2017 at 11:12 AM Official Post

Not caring != unable to find a decent fix

Don't be so judgemental.

Momo90 · August 4, 2017 at 9:08 AM

Is there any progress in solving the mentioned bug? I think several users have this bug:

Hyperion issues: kernel log spam (solved in 8.1.1), playback halting.

RPi + Other Software - 1080p videos lags | Hyperion - Forum

Momo90 · August 6, 2017 at 5:13 PM

Quote from Ottie

Do you use the Libreelec Hyperion Addon??

I had the same issue with the Libreelec Hyperion Addon, I removed the addon and installed the "normal" hyperion via the "normal" hypercon tool and now the stuttering is gone.

I also tried the "normal" hyperion via "normal" hypercon. But even then i had the stuttering

Momo90 · August 8, 2017 at 9:22 PM

To keep you informed what doesnt solve the bug:

Changing window size of the amlgrabber

Changing video cache

Using original hyperion

Using a extra powered usb hub

Disabling/enabling the amlogic hardware accerlation

So i have no idea what else i could do...