Hi kszaq,
Can you add support for the LB-LINK BL-WN151 USB wifi adapter?
ID 148f:7601 Ralink Technology, Corp. RT2870
Product page: LB-LINK BL-WN151 150Mbps Wireless N USB Adapter
Linux driver: LB-LINK BL-WN151 Driver (Linux)
This is the cheapest alternative for boxes with non-working wifi.
It should be already supported by mt7601u driver included in my builds.
It should be already supported by mt7601u driver included in my builds.
I tried again, but not working, wifi does not appear in LibreELEC.
Bus 001 Device 003: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
[ 247.124029@3] usb 1-1: new high-speed USB device number 3 using xhci-hcd
[ 247.394006@3] usb 1-1: New USB device found, idVendor=148f, idProduct=7601
[ 247.394121@3] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 247.394196@3] usb 1-1: Product: 802.11 n WLAN
[ 247.394266@3] usb 1-1: SerialNumber: 1.0alias usb:v148Fp7601d*dc*dsc*dp*ic*isc*ip*in* mt7601ustaIn other words: pasting a small part of log is not useful at all. The line above shows that your device should be supported by mt7601usta kernel module. I can't help further.
Codealias usb:v148Fp7601d*dc*dsc*dp*ic*isc*ip*in* mt7601ustaIn other words: pasting a small part of log is not useful at all. The line above shows that your device should be supported by mt7601usta kernel module. I can't help further.
Thank you for your help, it works, we using an old LE version.
If you want to check yourself, install Terminal Emulator 1.0.70 by Jack Palevich and type "su" (accept root privilege) and "lsmod" when connected to wlan in Android. It is possible that multiple versions of this golden box exist.
Mine also uses 9082xs
It's not a single file, it should be a folder with 9082xs kernel driver source code. 9082xs.so from your shared folder is the kernel module that we need sources for.
Hi kszaq
I just received driver for 9082xs from the chinese engeneers.
Can you add it to the distribution?
I have S905X with that chip and I can check it if it works ...
I attached what they sent
It's an archive. There is a file around the driver named "Porting Guide.doc". I think you should replace a 3-4 files.
if there is a problem, I'll write them
best regards
The driver in archive you provided is in binary format - it is a kernel module and cannot be used. We need the driver source code or at least an object file, e.g. 9082xs.o but in the second case it may still not work.
Sent from my Nexus 4 using Tapatalk
Kszaq, you are the man when it comes to all things linux.
When the time comes, I will also be available for testing of this 9082xs chip. T95X 2g/8g
Integrating the driver should be very simple but we need some good will of chip manufacturer.
Sent from my Nexus 4 using Tapatalk
Can anyone with 9082xs chip check if this build works, please: LibreELEC-S905.arm-8.0-devel-20170610224336-r26035-g5b22184.img.gz
Preferably check the build on a "fresh" SD card to not mess up your current LE setup.
Thank you for testing. I included the prebuilt module in this build and set kernel options so that it can load (preempt kernel) but it failed for me with kernel panic. I thought that it was because I had a different WiFi chip but it looks like the prebuilt module is the cause and we cannot use it.
I also have a Tanix TX3 Pro. Is there anything I can do to get the wifi working on this box?
My last batch of boxes worked fine, but I see on these forums that they upgraded their wifi chip and now is incompatible?
The only way to make it work is to get driver source code.
Not sure if this helps.
Nope. It is a pre-compiled module not uncompiled source code, so it is no use at all.
Can you please check if the 9082xs chip works when its alias is added to an unmodified 8189es driver:
LibreELEC-S905.arm-8.0-devel-20170613103135-r26045-g1d4ca1d.img.gz
