Hi!
I have use USB keyboard to switch SSH ON.
Then I follow instructions from the beginning of the tread.
Got factory code and codes for all keys.
I made new remote.confg from sample, copy it to configfiles, but still not working.
Getting frustrated....remote.zip
Display MoreHi!
I have use USB keyboard to switch SSH ON.
Then I follow instructions from the beginning of the tread.
Got factory code and codes for all keys.
I made new remote.confg from sample, copy it to configfiles, but still not working.
Getting frustrated....remote.zip
I can't help anymore.
There is a remote setup for your device using Coreelec LibreELEC 9.0.x Remote files - Remote Controllers - CoreELEC Forums
But, the set up is not the same, remote conf is not used. So you could install coreelec to a different usb, then by reading the instructions there, get your remote working. Post further questions about it, there
WeTek Pro Remote
User-created config: wetek_pro_remote.zip
Credits to: Create remote.conf from scratch
Hi bublegum!
Now I realise that I can't get right factory code.
I get different replies depending on button I press:
I'm holding a key on remote and enter dmesg-c in putty and press enter.
Am I doing something wrong?
Display MoreHi bublegum!
Now I realise that I can't get right factory code.
I get different replies depending on button I press:
I'm holding a key on remote and enter dmesg-c in putty and press enter.
Am I doing something wrong?
It's been a long time since I did this. Did you say you are holding the key? Just press & release, & see what code is produced
& read this again
It's been a long time since I did this. Did you say you are holding the key? Just press & release, & see what code is produced
& read this again
Hi!
I think I do it like in manuals:
If I only do dmesg-c then it's only clearing cache.
If I only push button on remote nothing happens.
Maybe I should post question in "Create remote from the scratch"?
Hi there!
I own an Beelink Mini MX Ver 1.0.
(2G/16G Amlogic S905 Quad Core 2.4GHz/5.8GHz HDMI 2.0 Bluetooth 4.0 Support Gigabit LAN)
At the moment i'm running [8.2.3.1] LibreELEC 8.2 for S905/S905X on the box. I installed it to internal memory and it's working like a charm!
My question is... the remote I'm using it the following remote. But it's not working that great anymore. Some buttons don't react every time I use it...
And I would like to have a remote with some more function-buttons so I could program them to do some other kodi-functions.
I have a few questions...
Can I just buy an other remote? What remote do you guys advice? How do I get kodi to recognise the remote?
Hi. Greetings from Spain. Hope you can help me. I have a problem with my X96 mini remote. The Stop buttom doesn't work properly, works like Play/Pause buttom. This is the original remote.conf:
#*********************************************************************************************************
#this file is configuration for each factory remote device
# work_mode 0 :software mode 1 :hardware mode
# repeat_enable 0 :disable repeat 1 :enable repeat
#
# factory_code each device has it's unique factory code.
# pattern:custom_code(16bit)+index_code(16bit)
# examble: 0xff000001 = 0xff00(custom cod) 0001 (index)
#
# release_delay unit:ms.release will report from kernel to user layer after this period of time
# from press or repeat triggered.
#
# debug_enable 0 :debug disable 1 :debug disable
#
# SW MODE:
# bit_count how many bits in each frame
# tw_leader_act time window for leader active
# tw_bit0 time window for bit0 time.
# tw_bit1 time window for bit1 time
# tw_repeat_leader time window for repeat leader
# REG
# reg_base_gen set value for PREG_IR_DEC_BASE_GEN
# reg_control set value for PREG_IR_DEC_CONTROL
# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE
# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE
# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME
#*************************************************************************************************************
#amlogic NEC remote
work_mode = 0
repeat_enable = 1
repeat_delay = 130
repeat_peroid = 120
release_delay = 20
debug_enable = 1
fn_key_scancode = 0x00
left_key_scancode = 0x51
right_key_scancode = 0x50
up_key_scancode = 0x16
down_key_scancode = 0x1a
ok_key_scancode = 0x13
#pageup_key_scancode = 0x04
#pagedown_key_scancode = 0x1b
custom_begin
factory_infcode = 0
factory_code = 0xfe010001
mouse_begin
0 0x51 //mouse key left
1 0x50 //mouse key right
2 0x16 //mouse key up
3 0x1a //mouse key down
mouse_end
key_begin
0x11 102 #HOME
0x19 158 #EXIT
0x4c 125 #MENU
0x40 116 #ON/OFF
0x18 115 #VOL+
0x10 114 #VOL-
0x16 103 #UP
0x51 105 #LEFT
0x13 97 #DPAD_CENTER
0x50 106 #RIGHT
0x1a 108 #DOWN
0x41 113 #MUTE
0x5a 119 #PLAY_PAUSE
0x52 124 #MEDIA_PAUSE
0x0a 257 #MUSIC
# 0x49 261 #PICTURE PLAYER
0x4d 263 #SHORTCUT_VIDEOPLAYER
# 0x48 262 #SHORTCUT_FILEBROWSER
0x03 217 #SEARCH
0x0e 70 #267->WEBSITE #70-->EXPLORE
0x43 255 #SETTINGS
0x54 120 #FAST_FORWARD
0x55 121 #REWIND
0x59 122 #PREV
0x58 123 #NEXT
0x4e 2 #1
0x0d 3 #2
0x0c 4 #3
0x4a 5 #4
0x09 6 #5
0x08 7 #6
0x46 8 #7
0x05 9 #8
0x04 10 #9
0x01 11 #0
0x42 14 #DEL
# 0x52 128 #MEDIA_STOP
# 0x45 264 #ONEKEY_ZOOM
0x06 265 #SHORTCUT_SUBTITLE
0x44 266 #KODI
0x0f 233 #MAIN_MENU
# 0x12 269 # F9
0x47 112 #@ AT
0x0a 111 #MUSIC
0x4d 101 # (F3)VIDEO
0x49 66 #(F1)PHOTO
0x48 77 #(F2)FILE
0x12 88 #(F9)CLEAN
0xf2 140 #F10 oritation
0x4b 140 #F10 oritation
0x45 99 #(F6)ZOOM
key_end
repeat_key_begin
0x11 102 #HOME
0x19 158 #EXIT
0x4c 125 #MENU
0x40 116 #ON/OFF
0x18 115 #VOL+
0x10 114 #VOL-
0x16 103 #UP
0x51 105 #LEFT
0x13 97 #DPAD_CENTER
0x50 106 #RIGHT
0x1a 108 #DOWN
0x41 113 #MUTE
0x5a 119 #PLAY_PAUSE
0x52 124 #MEDIA_PAUSE
0x0a 257 #MUSIC
# 0x49 261 #PICTURE PLAYER
0x4d 263 #SHORTCUT_VIDEOPLAYER
# 0x48 262 #SHORTCUT_FILEBROWSER
0x03 217 #SEARCH
0x0e 70 #267->WEBSITE #70-->EXPLORE
0x43 255 #SETTINGS
0x54 120 #FAST_FORWARD
0x55 121 #REWIND
0x59 122 #PREV
0x58 123 #NEXT
0x4e 2 #1
0x0d 3 #2
0x0c 4 #3
0x4a 5 #4
0x09 6 #5
0x08 7 #6
0x46 8 #7
0x05 9 #8
0x04 10 #9
0x01 11 #0
0x42 14 #DEL
# 0x52 128 #MEDIA_STOP
# 0x45 264 #ONEKEY_ZOOM
0x06 265 #SHORTCUT_SUBTITLE
0x44 266 #KODI
0x0f 233 #MAIN_MENU
# 0x12 269 # F9
0x47 112 #@ AT
0x0a 111 #MUSIC
0x4d 101 # (F3)VIDEO
0x49 66 #(F1)PHOTO
0x48 77 #(F2)FILE
0x12 88 #(F9)CLEAN
0xf2 140 #F10 oritation
0x4b 140 #F10 oritation
0x45 99 #(F6)ZOOM
repeat_key_end
custom_end
custom_begin
factory_infcode = 1
factory_code = 0xbd020001
key_begin
0xca 103
0xd2 108
0x99 105
0xc1 106
0xce 97
0x45 116
0xc5 133
0x80 113
0xd0 15
0xd6 125
0x95 102
0xdd 104
0x8c 109
0x89 131
0x9c 130
0x9a 120
0xcd 121
key_end
custom_end
I guess the problem is in 0x52 124 #MEDIA_PAUSE and # 0x52 128 #MEDIA_STOP. I edit the file with Notepad++. The new edited file:
#*********************************************************************************************************
#this file is configuration for each factory remote device
# work_mode 0 :software mode 1 :hardware mode
# repeat_enable 0 :disable repeat 1 :enable repeat
#
# factory_code each device has it's unique factory code.
# pattern:custom_code(16bit)+index_code(16bit)
# examble: 0xff000001 = 0xff00(custom cod) 0001 (index)
#
# release_delay unit:ms.release will report from kernel to user layer after this period of time
# from press or repeat triggered.
#
# debug_enable 0 :debug disable 1 :debug disable
#
# SW MODE:
# bit_count how many bits in each frame
# tw_leader_act time window for leader active
# tw_bit0 time window for bit0 time.
# tw_bit1 time window for bit1 time
# tw_repeat_leader time window for repeat leader
# REG
# reg_base_gen set value for PREG_IR_DEC_BASE_GEN
# reg_control set value for PREG_IR_DEC_CONTROL
# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE
# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE
# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME
#*************************************************************************************************************
#amlogic NEC remote
work_mode = 0
repeat_enable = 1
repeat_delay = 130
repeat_peroid = 120
release_delay = 20
debug_enable = 1
fn_key_scancode = 0x00
left_key_scancode = 0x51
right_key_scancode = 0x50
up_key_scancode = 0x16
down_key_scancode = 0x1a
ok_key_scancode = 0x13
#pageup_key_scancode = 0x04
#pagedown_key_scancode = 0x1b
custom_begin
factory_infcode = 0
factory_code = 0xfe010001
mouse_begin
0 0x51 //mouse key left
1 0x50 //mouse key right
2 0x16 //mouse key up
3 0x1a //mouse key down
mouse_end
key_begin
0x11 102 #HOME
0x19 158 #EXIT
0x4c 125 #MENU
0x40 116 #ON/OFF
0x18 115 #VOL+
0x10 114 #VOL-
0x16 103 #UP
0x51 105 #LEFT
0x13 97 #DPAD_CENTER
0x50 106 #RIGHT
0x1a 108 #DOWN
0x41 113 #MUTE
0x5a 119 #PLAY_PAUSE
0x52 128 #MEDIA_STOP
0x0a 257 #MUSIC
# 0x49 261 #PICTURE PLAYER
0x4d 263 #SHORTCUT_VIDEOPLAYER
# 0x48 262 #SHORTCUT_FILEBROWSER
0x03 217 #SEARCH
0x0e 70 #267->WEBSITE #70-->EXPLORE
0x43 255 #SETTINGS
0x54 120 #FAST_FORWARD
0x55 121 #REWIND
0x59 122 #PREV
0x58 123 #NEXT
0x4e 2 #1
0x0d 3 #2
0x0c 4 #3
0x4a 5 #4
0x09 6 #5
0x08 7 #6
0x46 8 #7
0x05 9 #8
0x04 10 #9
0x01 11 #0
0x42 14 #DEL
# 0x45 264 #ONEKEY_ZOOM
0x06 265 #SHORTCUT_SUBTITLE
0x44 266 #KODI
0x0f 233 #MAIN_MENU
# 0x12 269 # F9
0x47 112 #@ AT
0x0a 111 #MUSIC
0x4d 101 # (F3)VIDEO
0x49 66 #(F1)PHOTO
0x48 77 #(F2)FILE
0x12 88 #(F9)CLEAN
0xf2 140 #F10 oritation
0x4b 140 #F10 oritation
0x45 99 #(F6)ZOOM
key_end
custom_end
Delete the original file and copy the new one with ES File Explorer via USB, but the problem remains. Stop buttom is Play/Pause buttom. Any suggestion? Thanks in advance.
Does anybody know what the difference is between the following lines in the remote.conf?
work_mode = 0
work_mode = 1
And the next question... How can I test if my remote can send IR-signals (to boot up the box) to my box?
Here is my remote.conf file for the Sammix R95. It's customized a bit and I've commented out the mouse toggle parts.
https://drive.google.com/file/d/1wsqrjp91wd7wqwpyquttpd-mu0hzabyz/view?usp=drivesdk
how the remote control files are loaded in the box
Hello my friends,
I leave here my remote file for LibreELEC 8.2.3.1 for Droid Box Plus by X-View (comes with android 7)
I follow the "Create remote.conf from scratch" guide, but keep getting the "no such directory" error .
Then I thought I should use the original Android remote. config, so I used Filezilla to download the original android remote.conf , then I copy to /storage/.config , and edited with notepad ++.following the "Create remote.conf from scratch" guide.
Now the IR Remote works like a charm , all buttons inclusive mouse.
My Box model is Droid Box Plus by X-View , sold in Argentina.
» Chipset: Amlogic S905X
» CPU: Quadcore Cortex A53 - 2Ghz
» GPU: Pentacore Mali 450Mhz
» Online Video Streaming: hasta 4K@60fps
» Ram: 1GB DDR3
» HDMI 2.0
» 5V/2A
» Flash: 8GB Nand
» Puerto MicroSD
» 2 X USB2.0
» WIFI 802.11b/g/n
» Puerto Ethernet
» BT 4.0
» Entrada Gigalan
Hi !
I need the Remote.conf file for this remote (X96 mini).
Please !
Help Me !
Thanks !
hi
i need your help for my problem: my m8splusII (before android is android 6.0) works with my remote controller IR and i decide to change from android 6.0 to androidTV 6.0 because android 6.0 not good with TV, instead androidTV is best for TV so i did installed androidtv "atvxperience" works installation, but not works correct with my remote controller ( have 12 keys, but works only 5 keys..) so i find here remote.cfg.. maybe will be can resolve my remote but i dont know how i will fix it..
see here picture..
so i will replace the file remote.cfg ? but where i will find that file for s912 on my m8splusII..? 64bit
see feature of m8splusII:
i did ask team atvxperience.. but they dont know how resolve my problem.. so i try ask you here team libreelec..please,,
Can someone help me with Gyration GYR3101EU remote ?
It is a RF remote and few buttons don't works at all or are duplicated with other buttons.
It would be wonderfull if someone own this remote and succesfully made a remote.conf with all buttons and mouse fonctions.
Thanks in advance
Working remote.conf for Mecool KM9 PRO
Working remote.conf for Mecool KM9 PRO
hi gunter0, please explain me how did you done installed remote.conf.. ?step-step please..
Please, does anyone have remote file for box A95X F2? Thank you very much..
