I got my raspberry pi 5 the other day and have it up and running with LE11. 4K HDR with HD audio is working great.
oddly I was unable to install LE12 - I got a Mount_storage error. using the same card and process LE11 worked fine. I tried with 2 different cards and had the same result.
i got the same error trying to run the aarch64 LE12 images. The LE11 ARM64 images booted fine on the RPI5. Out of pure frustration I assumed that the power supply i had been using on my RPI4 would be sufficient for the RPI5. It is not. When i put a 20w PD USB-C supply to the board suddenly the LE12 images booted fine. YMMV but try using a more powerful PS (official recommendation is using the 27w PD USB-C PS)
There's a bug somewhere in the boot process. It's known but unresolved. First boot will succeed. Second will fail. Third and all future boots will succeed fine. So no need to examine SD cards or check PSU's, just power up the board again.
When it failed, fsck found an orphaned I-Node.
FYI: I'm getting a mount_storage: mount_common: error on my RPi5 4GB using 12.0-nightly-20231209
Not sure if this is the same mount_storage error reported here.
If it boots correctly after the third attempt, it's the same error.
If it boots correctly after the third attempt, it's the same error.
Ah ha!
I'd gotten that error on 1st power up (I installed 20231207 twice, then 20231209) after each of the 3 installs, but never tried a reboot. I just simply rebooted this time and it came up on the 2nd boot.
TYVM
FYI: I'm getting a mount_storage: mount_common: error on my RPi5 4GB using 12.0-nightly-20231209
Not sure if this is the same mount_storage error reported here.
I have the same error, on the screen I write "reboot", it restarts but the same error keeps appearing, I have done it again and again and nothing.
Do cold boot not warm boot?
Had the same issue today after putting my RPi 5 into the GeeekPi Raspberry Pi 5 Armor case.
Issue was that I had tightened the screws too much.
Loosening them a bit solved it.
