![](https://forum.libreelec.tv/core/images/avatars/0c/298-0c5223d8271c05b8d8eabc4fbf9b7b500b44e3fe.png)
[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro
-
afl1 -
November 29, 2016 at 9:04 PM -
Thread is Unresolved
-
-
Is it safe to perform a backup on my previous device kii pro, and perform a recovery on the new device ki pro?.
Is there any reason to install everything manually (maybe drivers or somethinks else) ?.
Thanks in advance.
-
afl1, Thx for info. I will ask him on wetek forum. Maybe he can do something
-
Is it safe to perform a backup on my previous device kii pro, and perform a recovery on the new device ki pro?.
Is there any reason to install everything manually (maybe drivers or somethinks else) ?.
Thanks in advance.
You can do it. Drivers are loaded at system boot and they are selected by autodetect or by device tree.
-
I installed dbt via TWRP using android update and now LE is fully running from NAND.
Unpack following archive to empty SD card.
Put card in box and restart it. If TWRP3 is not starting use toothpick method.
In TWRP install from SD card KI_PRO_dtb.zip. Use USB mouse to control TWRP.
Remove SD card and restart box.
kszaq try to find how to install dtb in nougat boxes.
for the first boot from sdcard (before using installtointernal command) , Is it necessary to replace dtb file with gxl_p230_k1_pro.dtb?.
Of course, after that, installing according to what you wrote (with twrp).
-
for the first boot from sdcard (before using installtointernal command) , Is it necessary to replace dtb file with gxl_p230_k1_pro.dtb?.
Of course, after that, installing according to what you wrote (with twrp).
You have to replace it. Don't install nougat kernel version to nand, there is different dtb in my workaround.
-
Hello afl1! Thanks again for your efforts! Unfortunately, I must say that something is wrong with fractional framerate switching in your johngalt-based builds. I have the typical juddering every ~42 sec on 23.976, and ~17 sec on 29.97 (59.94) videos, which doesn't appear on the pure johngalt builds.
-
Hello afl1! Thanks again for your efforts! Unfortunately, I must say that something is wrong with fractional framerate switching in your johngalt-based builds. I have the typical juddering every ~42 sec on 23.976, and ~17 sec on 29.97 (59.94) videos, which doesn't appear on the pure johngalt builds.
My builds has the same setup as johngalt 8.0.2- testing7. Pls, try this version, there is support for internal tuner.
-
My builds has the same setup as johngalt 8.0.2- testing7. Pls, try this version, there is support for internal tuner.
Yes, i've just compared Testing7 and your latest build based on it, and i've checked it twice - same result: johngalt's build is ok, but your build does't switch frequency properly. I staying on Testing7 for now, but i really like your improvements of channel switching
Bytheway, for judder detection i've used this (if you have some time - perhaps you should try it yourself): FPS testing videos
-
Anyone have the last version of the stock android? I can´t start Libreelec from SD card using Malayk Mod
Thank you!
-
Hi. I have a KII PRO.
Is it possible to run TVheadend and watch DVB-T2 without network connection?
Currently, without connecting to my router, TV is not working.
-
Hi. I have a KII PRO.
Is it possible to run TVheadend and watch DVB-T2 without network connection?
Currently, without connecting to my router, TV is not working.
No, now it is impossible. Ask kszaq if it possible to fix it.
-
No, now it is impossible. Ask kszaq if it possible to fix it.
actually it is possible just by changing the network from DHCP to Manual. But doing this make EPS not working. So I am hoping there is another better solution.
-
Yes, i've just compared Testing7 and your latest build based on it, and i've checked it twice - same result: johngalt's build is ok, but your build does't switch frequency properly. I staying on Testing7 for now, but i really like your improvements of channel switching
Bytheway, for judder detection i've used this (if you have some time - perhaps you should try it yourself): FPS testing videos
Test build with fixed massive frame skipping.
LibreELEC-S905.arm-8.0-8.0.2-devel-201706271833-gc89478b-I.img.gz
This version is using same kernel as johngatl's Testing7.
-
Anyone have the last version of the stock android? I can´t start Libreelec from SD card using Malayk Mod
Thank you!
Nobody?
-
Nobody?
ACEMAX Products SW Downloading Center
I also run that custom rom 5.2 but I can use toothpick methode no problem @all, tested with version 4.5 and 5.2 on KII pro from Mecool
-
I've been thinking about picking up a Wetek, Minix until I stumbled across this device. Would you recommend the KIII or the KII? How does Libreelec work and how does it handle 4K (this is going to be my main use)? Does the dvb s2 work correctly (planning on using oscam)?
Thanks in advance
-
I've been thinking about picking up a Wetek, Minix until I stumbled across this device. Would you recommend the KIII or the KII? How does Libreelec work and how does it handle 4K (this is going to be my main use)? Does the dvb s2 work correctly (planning on using oscam)?
Thanks in advance
in fact, meecool K1 PRO is the best for the moment, S905"D" dual tuner, 2 GB of DDR4, sure it's the way to go
-