[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro


  • Tvheadend it;s ok with clean clean installation, but i can't find any channel with internal tuner:


    Watch youtube video for tutorial.
    [hr]
    [hr]

    [hr]



    Tvheadend 8.1.114 in #1 with LNB fix.
    Now is not necessary check "Turn off LNB when idle".

    Edited once, last by afl1 ().


  • Hi afl1, may I respectfully suggest you to change the heading of this Forum Topic from [8.0.0d] to the current [8.0.0.f] version.


    Thanks for the Incredible Job you have done so far.


    Regards from the Republic of Panama


    KI Plus with your Libreelec with Internal DVB-S and external DVB-T Realtek tuner working Good.

    Edited once, last by vicpro26 ().



  • the latest raybuntu experimental build LE8 with improved channel changing on Wetek Play2


    it is possible in your build please


  • Provide also driver debug log.


    Tuner does not lock with atsc, with dvbc it does

  • Hi


    Sorry for the newbie Q, but what addon do I need to use to access the DVBT tuner config and scan channels? I did install TVendhead and PVR from the first page. One is just a service and the other is the PVR client. But where is the tuner config addon?


    Thanks


    Edit: OK I understand that what I'm looking for is the Backend interface. I did find a Libreelec addon called VDR Config


    I tried to use it. Selected DVB-T and my country. Then started the scan. It did indentify the built in tuner as AVailink avl6862, but after a full scan it did not find any channels. The tuner works fine ubder Android.


    What am I missing here?

    Edited once, last by EB1000 ().


  • Hi


    Sorry for the newbie Q, but what addon do I need to use to access the DVBT tuner config and scan channels? I did install TVendhead and PVR from the first page. One is just a service and the other is the PVR client. But where is the tuner config addon?


    Thanks


    You do not setup the TVHeadEnd server under LibreELEC. You set it up through a browser at IP address:9981. Please read the following:
    http://forum.kodi.tv/showthread.php?tid=270385&pid=2315547#pid2315547

  • Under Options - Group there is only one option - "All Channels". Is it planned to have another option to group under the individual satellite/terrestrial groups ?
    That would be a 'nice to have'


  • I have found more channel dvbt and dvb-s with v113 than v114.
    Dvbt 650mhz orf I was not able to scan with v114, but with v113 works.
    in Dvb-t missed 4 channels of 118 from 650Mhz mux with "f" firmware and v114, I uninstalled v114 and installed v113 and 650Mhz MUX works, too.
    In dvb-s missed 30 channels with 114 tvheadend, too.

    Edited once, last by gor ().


  • In v113 is tuner sharing fix, it use same scanning data.


    Same scanning data as what version ?
    There must still some bugs in TVH as it has errors scanning some transponders. For example scanning 3900H on Intelsat 19C always comes back as a FAIL. Same for 4146V.
    I plan to post an updated version of TVH with extended_cw soon (if there is any interest).

  • Tuner does not lock with atsc, with dvbc it does


    Special test build for pepesuriano with the latest crazycat69 ''Improve DVB-C annex A and B support''
    LibreELEC-S905.arm-8.0-8.0.0f-annexB.img.gz


    Try to use DVB-C Annex B as DVB-.C. Driver is trying detect annex B.

    Edited once, last by afl1 ().

  • Special test build for pepesuriano with the latest crazycat69 ''Improve DVB-C annex A and B support''
    LibreELEC-S905.arm-8.0-8.0.0f-annexB.img.gz


    Try to use DVB-C Annex B as DVB-.C. Driver is trying detect annex B.


    Tested. With dvbc anx b (using dvbc option) and atscc it has the same behaviour


    Versions:

    Code
    1. LibreELEC (community) Version: 8.0.0f-annexB
    2. LibreELEC git: c3df916ccd7b06fb923e473f7b2c308501498ada
    3. HTS Tvheadend 4.1.2459 ~ LibreELEC Tvh-addon v8.1.11


    SSH output


    Tvheadend output


    Is it also returning infinite times this error only when either atsc or dvbc tuner gets enabled

    Code
    1. [  [email protected]] R848: r848_init:
    2. [  [email protected]] AVL: avl6862_read_status: Level=32
    3. [  [email protected]] AVL: avl6862_read_status: Level=32
    4. [  [email protected]] AVL: avl6862_read_status: Level=32
    5. [  [email protected]] AVL: avl6862_read_status: Level=32
    6. [  [email protected]] AVL: avl6862_read_status: Level=32
    7. [  [email protected]] AVL: avl6862_read_status: Level=32
    8. [  [email protected]] AVL: avl6862_read_status: Level=32
    9. [  [email protected]] AVL: avl6862_read_status: Level=32
  • Clean install ver f ,install server tvheandeat ...114 ,and client ...119.1
    I setuped server update off, pid max 26, switch (diceq )4 ports, initial scan (astra 19,hot-bird 13 ) super 3000 services
    the server runs perfectly ,streams in pc ,android tablet ,to the local box , install some mainstream add-ons, exodus,uiptv. everything is ok .THe next day I booted the tv box ,stacked in kodi logo screen .i tested the server runs perfect stream in pc in android tablet.I renamed the Addon27.db to old , then the server started again, but no the client ,which always crashing ,until the next fresh clean install.

  • hi afl1 ,thanks for fixing the tuner,no it works perfect.i want to ask you if oscam from libreelec add on is working.if it's working do you have oscam.conf to know that my settings is correct because oscam not working in me.i see the readers from cccam in :8888 port but don't open any channel.