[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

Quote from Alessio78

Is password protected. Difference with old ones?

Inviato dal mio LG-D802 utilizzando Tapatalk

Link fixed

Quote from Bitman

Here is patched binary of oscam for use on K1+ and KII Pro.

oscam-svn11357-armv7-webif-oscam-emu-patched

What is the difference between this and from repo?

Quote from afl1

Again tutorial:

Download E22TVH v1.5 and install it.
Download catseyee2settingsfileallsats120217 and unzip it.
Open E22TVH set tvheadend ip and password (libreelec).
Click from 'From File' and open in unzipped archive file 'lamedb'
Then E22TVH starts converting db to tvheadend format.
After successful converting it tries to connect to box with validation error.
Now we have to continue manually. Tvheadend db is prepared in 'C:\tmpE22TVH\input'.
Install winscp and transfer 'C:\tmpE22TVH\input' to box's /storage/.kodi/userdata/addon_data/service.tvheadend42/.
You can preserve current scanning renaming current input folder. Then you have to restart tvheadend.
After restart you can see a lot new networks (e.g. DVB-S 130E, DVB-S 192E DVB-S 235E, ...) and then you have to connect new networks to Tv Adapter (LNB).
And finally map channels.

Display More

thnks
I have my channels but when I chose one I have this message
Tvheadend htsp client subscription error
why

Quote from afl1

AGAIN !!!

Pls, report exact versions and dvb (e.g. dvb-t2, dvb-s2, ...) otherwise this info is for nothing.

I install this version ( LibreELEC-S905.arm-8.0-devel-7.95.beta6Y-20170216132010.img.gz - beta 6y) on USB to run (I dont like SD Card, cause are too slow). Put TvHeadend, and dvb-t runs perfectly it scans right, but cannot scan on dvb-s. I dont know why

I use KII-Pro.

Thanks.

Quote from juandi34

I install this version ( LibreELEC-S905.arm-8.0-devel-7.95.beta6Y-20170216132010.img.gz - beta 6y) on USB to run (I dont like SD Card, cause are too slow). Put TvHeadend, and dvb-t runs perfectly it scans right, but cannot scan on dvb-s. I dont know why

I use KII-Pro.

Thanks.

Check your LNB settings and make sure you only enable one tuner at a time.

Oscam ( oscam-svn11357-armv7-webif-oscam-emu-patched )in Vitmod-LE

• 2017/02/18 15:31:43 7910CF07 c (dvbapi) Demuxer 0 found 3 ECMpids and 7 STREAMpids in PMT
• 2017/02/18 15:31:44 7910CF07 c (dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument

AML DVB api patch is neded !!!!

algdu83, run option force scan in tvh webif configuration in networks (choose your network, force scan and wait some time to scan all muxes ) . After this everythig should work good

Quote from Bitman

Check your LNB settings and make sure you only enable one tuner at a time.

OK. Thanks. It runs fine now. I have scanned the two DVB, and have the complete service list of the two DVB.
So I cannot see DVB-S or DVB-T without put enable any tuner automatically ??? Cannot switch TVHeadend it auto ???

Thanks.

Just found following image on the 4pda, i don't know who made it, BUT, it is perfectly work with VDR PVR Backend, i have smoothly scan both t2 and s2 just from Kodi and it working just great. Can you be so kind to review it, maybe we can use driver. Problem with this image it has wrong resolution on the screen, also maybe other issues...
LibreELEC-Amlogic.aarch64-KII_Pro-7.0.2.004.img.gz

Quote from afl1

You probably reinvented wheel #17.

Oops, but, then, please advice how i can flash latest release on 1st post for KII Pro version able to work both T2/S2 tuners and resolution and others...
Thank you.
I flash 5 latest from post 1, no one able to scan t2/s2. What wrong with me ?

Quote from Alessio78

I tested a new microSD with beta6y, tvh 110 and dvb-t internal (I don't tried dvb-s).
The scan found about 45 ch (with external dvb-t USB about 450 ch) and during the scan I can see in the status that the snr and the sensitivity is about the 50-60%. With the external USB dvb-t and the same TV antenna the sensitivity is 100%.
It's possible that this driver don't amplify/filter correctly the signal?!?
Another thing is that after the mapping if I try to see some channels I can't because I receive message "no signal" and in tvh status I see 60% of sensitivity.
For my K2 Pro and for the internal dvb-t the best version is beta5n. With this one, after a successful scan performed with external dvb-t, I can see well all channels through internal tuner.
Anyway tks for great work!

Inviato dal mio LG-D802 utilizzando Tapatalk

Display More

This is the exact my situation. I add also that with last version beta 6 the drivers for DVb don't work with tvheadend. I the configuration I see only one device (dvb-t). And this version don't scan with a external dbv-t key.
Beta5n and n1 are working OK but not scan with Internal.
I have the same box, a kii pro.

Hello afl1,

after coming back from almost two months of traveling around the world,
I tried your new LibreELEC-S905.arm-8.0-devel-7.95.beta6a-20170214112050.img.gz image on my K1plus.

Everything is running really good so far.
Watching DVB-S2 incl. newcamd is working, streaming, plugins...
(I didn't try scanning for DVB-S channels cause I used the TVH backup of a previous image)

Nevertheless I still have some questions:

1. There is a button named "DTV" on my K1plus remote.
At Jarvis builds pushing this button called up the channel list.
At Krypton build the button does nothing.
Is there any why to get this function back?

2. Is this image still a 32bit build or did you go back to 64bit.
I am asking because of inputstream and widevine functionality.

3. Using the original android image the K1plus is capable to use Miracast and Airplay.
Is it possible to implement those functions to your builds?

Thanks in advance for your answers and also for your great work.

You are doing a really good job with your builds and its a pleasure to use them.

Hi,

I am using KII pro with Malaysk fw in internal flash - its working good.
On SD card I have latest image LibreELEC-S905.arm-8.0-devel-7.95.beta6a-20170214112050.img.gz with replaced dtb.img for KII pro.
I am using TVHeadend service.tvheadend42-8.1.110.zip + pvr.hts-3.4.17.zip . Everything is working well except of powering ON the box:

1. When I power off the box by remote, box powering off, led switch to red, but I cant power on box with remote, it doesnt do anything.
2. To power on box I always need to make toothpick method. If I power on box with only pushing power button I get this error

Why it cant boot normaly from sd card? Any idea?

Quote from TollMan76

Hi,

I am using KII pro with Malaysk fw in internal flash - its working good.
On SD card I have latest image LibreELEC-S905.arm-8.0-devel-7.95.beta6a-20170214112050.img.gz with replaced dtb.img for KII pro.
I am using TVHeadend service.tvheadend42-8.1.110.zip + pvr.hts-3.4.17.zip . Everything is working well except of powering ON the box:

1. When I power off the box by remote, box powering off, led switch to red, but I cant power on box with remote, it doesnt do anything.
2. To power on box I always need to make toothpick method. If I power on box with only pushing power button I get this error

Why it cant boot normaly from sd card? Any idea?

Set up kodi at settings to switch off with power button, not standby

I tried both Standby and PowerOff too. With no luck.

Quote from TollMan76

I tried both Standby and PowerOff too. With no luck.

power on/off working fine here on kiipro with latest image
[hr]

Quote from juandi34

OK. Thanks. It runs fine now. I have scanned the two DVB, and have the complete service list of the two DVB.
So I cannot see DVB-S or DVB-T without put enable any tuner automatically ??? Cannot switch TVHeadend it auto ???

Thanks.

probably not, try to ask your question/feature request on irc freenode #hts channel