[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

ixprun · June 14, 2017 at 11:35 AM

Thanks for your reply, unfortunately I believe I have the correct settings because I have copied the working settings from the tvheadend running on my wetek where the mux works scans and works fine, reconfigured for the kii pro and got other muxes working but not this one (I am sure there are others but I stuck on 1 to try to isolate the problem). Secondly I started with a clean configuration, configured just hotbird, deleted all default muxes, scanned another mux that has swiss channels which through NIT discovered the 11526H mux and it still fails

I try to bang my head on this problem later on today.

**afl1** · June 14, 2017 at 5:30 PM

Quote from ixprun

Thanks for your reply, unfortunately I believe I have the correct settings because I have copied the working settings from the tvheadend running on my wetek where the mux works scans and works fine, reconfigured for the kii pro and got other muxes working but not this one (I am sure there are others but I stuck on 1 to try to isolate the problem). Secondly I started with a clean configuration, configured just hotbird, deleted all default muxes, scanned another mux that has swiss channels which through NIT discovered the 11526H mux and it still fails

I try to bang my head on this problem later on today.

I verified this transponder in my KI Pro and 31 services were scanned successfully.

ixprun · June 14, 2017 at 5:32 PM

Thank you....I guess you are using the latest build and tvheadend to test. Right?

I also try to switch on debugging/tracing in tvheadend and I also I found in this thread some flags I can switch on to debug the driver.

tiagovb · June 15, 2017 at 6:11 AM

Quote from afl1

Test build with previous DVB-C firmware LibreELEC-S905.arm-8.0-8.0.2-devel-20170613195105-g783d40f-I.tar.

Sorry man, no luck.

Code

2017-06-15 02:05:39.652 subscription: 0006: "127.0.0.1 [  | Kodi Media Center ]" subscribing on channel "TV Escola", weight: 150, adapter: "Availink avl6862 : DVB-C #0", network: "NET", mux: "315MHz", service: "TV Escola", profile="htsp", hostname="127.0.0.1", username="127.0.0.1", client="Kodi Media Center"
2017-06-15 02:05:39.717 linuxdvb: Availink avl6862 : DVB-C #0 - status   FAINT (SIGNAL)
2017-06-15 02:05:45.527 http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/18 -- 404
2017-06-15 02:05:45.530 http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/19 -- 404
2017-06-15 02:05:45.651 subscription: 0006: service instance is bad, reason: No input detected
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - close PID 11A8 (4520) [16/0xf16022c8]
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - close PID 11A8 (4520) [8/0xabeb2070]
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - close PID 11A0 (4512) [8/0xabeb2070]
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - close PID 11A1 (4513) [8/0xabeb2070]
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - close PID 11A2 (4514) [8/0xabeb2070]
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - stopping mux
2017-06-15 02:05:45.651 linuxdvb: Availink avl6862 : DVB-C #0 - stopping 315MHz in NET
2017-06-15 02:05:47.652 subscription: 0006: No input source available for subscription "127.0.0.1 [  | Kodi Media Center ]" to channel "TV Escola"
2017-06-15 02:05:47.728 subscription: 0006: "127.0.0.1 [  | Kodi Media Center ]" unsubscribing from "TV Escola", hostname="127.0.0.1", username="127.0.0.1", client="Kodi Media Center"
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - tuning on Availink avl6862 : DVB-C #0
2017-06-15 02:05:47.730 linuxdvb: Availink avl6862 : DVB-C #0 - starting 381MHz in NET
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - started
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - open PID 1C18 (7192) [8/0xabdad6d8]
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - open PID 1C10 (7184) [8/0xabdad6d8]
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - open PID 1C11 (7185) [8/0xabdad6d8]
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - open PID 1C18 (7192) [16/0xf1602850]
2017-06-15 02:05:47.730 capmt: OSCam: Starting CAPMT server for service "TV Cultura" on adapter 0
2017-06-15 02:05:47.730 subscription: 0007: "127.0.0.1 [  | Kodi Media Center ]" subscribing on channel "TV Cultura", weight: 150, adapter: "Availink avl6862 : DVB-C #0", network: "NET", mux: "381MHz", service: "TV Cultura", profile="htsp", hostname="127.0.0.1", username="127.0.0.1", client="Kodi Media Center"
2017-06-15 02:05:47.787 linuxdvb: Availink avl6862 : DVB-C #0 - status   FAINT (SIGNAL)
2017-06-15 02:05:53.730 subscription: 0007: service instance is bad, reason: No input detected
2017-06-15 02:05:53.730 mpegts: 381MHz in NET - close PID 1C18 (7192) [16/0xf1602850]
2017-06-15 02:05:53.730 mpegts: 381MHz in NET - close PID 1C18 (7192) [8/0xabdad6d8]
2017-06-15 02:05:53.730 mpegts: 381MHz in NET - close PID 1C10 (7184) [8/0xabdad6d8]
2017-06-15 02:05:53.730 mpegts: 381MHz in NET - close PID 1C11 (7185) [8/0xabdad6d8]
2017-06-15 02:05:53.731 mpegts: 381MHz in NET - stopping mux
2017-06-15 02:05:53.731 linuxdvb: Availink avl6862 : DVB-C #0 - stopping 381MHz in NET

Display More

ixprun · June 15, 2017 at 7:43 AM

Thanks afl1 ... I finally managed to sort it out and it had nothing to do with LibreELEC or even the KII Pro. I connected the KII Pro with the LNB out of my VU+ which till I setup the KII Pro and be happy with it, I wanted it to still be my primary viewing box for satellite. Unfortunately even with the VU switched off, for some reason about 10% of transponders fail to lock but work if I bypass the VU+. I should have checked it before, but the kind of randomness of the failed transponders (it wasn't like they all were on the same band, polarity, low SNR, symbol rate etc etc) threw me off.

Anyway, once again well done for the great work. I have been messing with Linux for 20 years and while I love it, I know how hairy it can get at times Hope I can be more useful in the future

**afl1** · June 15, 2017 at 9:18 AM

Quote from ixprun

Thanks afl1 ... I finally managed to sort it out and it had nothing to do with LibreELEC or even the KII Pro. I connected the KII Pro with the LNB out of my VU+ which till I setup the KII Pro and be happy with it, I wanted it to still be my primary viewing box for satellite. Unfortunately even with the VU switched off, for some reason about 10% of transponders fail to lock but work if I bypass the VU+. I should have checked it before, but the kind of randomness of the failed transponders (it wasn't like they all were on the same band, polarity, low SNR, symbol rate etc etc) threw me off.

Anyway, once again well done for the great work. I have been messing with Linux for 20 years and while I love it, I know how hairy it can get at times Hope I can be more useful in the future

Try to replace LNB in satellite dish with premium quality e.g. Inverto Black Ultra. In my dish is for Hotbird only standard LNB (I am watching only Supertennis) and for 11526H had only 54% SNR. Values bellow 50% are unwatchable.

**afl1** · June 15, 2017 at 10:25 AM

Quote from tiagovb

Sorry man, no luck.

Code

2017-06-15 02:05:39.652 subscription: 0006: "127.0.0.1 [  | Kodi Media Center ]" subscribing on channel "TV Escola", weight: 150, adapter: "Availink avl6862 : DVB-C #0", network: "NET", mux: "315MHz", service: "TV Escola", profile="htsp", hostname="127.0.0.1", username="127.0.0.1", client="Kodi Media Center"
2017-06-15 02:05:39.717 linuxdvb: Availink avl6862 : DVB-C #0 - status   FAINT (SIGNAL)
2017-06-15 02:05:45.527 http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/18 -- 404
2017-06-15 02:05:45.530 http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/19 -- 404
2017-06-15 02:05:45.651 subscription: 0006: service instance is bad, reason: No input detected
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - close PID 11A8 (4520) [16/0xf16022c8]
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - close PID 11A8 (4520) [8/0xabeb2070]
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - close PID 11A0 (4512) [8/0xabeb2070]
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - close PID 11A1 (4513) [8/0xabeb2070]
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - close PID 11A2 (4514) [8/0xabeb2070]
2017-06-15 02:05:45.651 mpegts: 315MHz in NET - stopping mux
2017-06-15 02:05:45.651 linuxdvb: Availink avl6862 : DVB-C #0 - stopping 315MHz in NET
2017-06-15 02:05:47.652 subscription: 0006: No input source available for subscription "127.0.0.1 [  | Kodi Media Center ]" to channel "TV Escola"
2017-06-15 02:05:47.728 subscription: 0006: "127.0.0.1 [  | Kodi Media Center ]" unsubscribing from "TV Escola", hostname="127.0.0.1", username="127.0.0.1", client="Kodi Media Center"
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - tuning on Availink avl6862 : DVB-C #0
2017-06-15 02:05:47.730 linuxdvb: Availink avl6862 : DVB-C #0 - starting 381MHz in NET
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - started
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - open PID 1C18 (7192) [8/0xabdad6d8]
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - open PID 1C10 (7184) [8/0xabdad6d8]
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - open PID 1C11 (7185) [8/0xabdad6d8]
2017-06-15 02:05:47.730 mpegts: 381MHz in NET - open PID 1C18 (7192) [16/0xf1602850]
2017-06-15 02:05:47.730 capmt: OSCam: Starting CAPMT server for service "TV Cultura" on adapter 0
2017-06-15 02:05:47.730 subscription: 0007: "127.0.0.1 [  | Kodi Media Center ]" subscribing on channel "TV Cultura", weight: 150, adapter: "Availink avl6862 : DVB-C #0", network: "NET", mux: "381MHz", service: "TV Cultura", profile="htsp", hostname="127.0.0.1", username="127.0.0.1", client="Kodi Media Center"
2017-06-15 02:05:47.787 linuxdvb: Availink avl6862 : DVB-C #0 - status   FAINT (SIGNAL)
2017-06-15 02:05:53.730 subscription: 0007: service instance is bad, reason: No input detected
2017-06-15 02:05:53.730 mpegts: 381MHz in NET - close PID 1C18 (7192) [16/0xf1602850]
2017-06-15 02:05:53.730 mpegts: 381MHz in NET - close PID 1C18 (7192) [8/0xabdad6d8]
2017-06-15 02:05:53.730 mpegts: 381MHz in NET - close PID 1C10 (7184) [8/0xabdad6d8]
2017-06-15 02:05:53.730 mpegts: 381MHz in NET - close PID 1C11 (7185) [8/0xabdad6d8]
2017-06-15 02:05:53.731 mpegts: 381MHz in NET - stopping mux
2017-06-15 02:05:53.731 linuxdvb: Availink avl6862 : DVB-C #0 - stopping 381MHz in NET

Display More

Another test build LibreELEC-S905.arm-8.0-8.0.2-devel-20170615110415-g1286521-I.tar.

**kszaq** · June 15, 2017 at 12:21 PM

afl1 I have identified the issue with addons: a commit for compat ioct was missing after DVB revert and incorrect headers were included when compiling TVHeadend and other DVB addons: PD#116363: dvb: fix pointer from 32bit to 64bit · kszaq/linux-amlogic-le@daee10d · GitHub

I will upload recompiled addons later today.

**afl1** · June 15, 2017 at 2:01 PM

Quote from kszaq

afl1 I have identified the issue with addons: a commit for compat ioct was missing after DVB revert and incorrect headers were included when compiling TVHeadend and other DVB addons: PD#116363: dvb: fix pointer from 32bit to 64bit · kszaq/linux-amlogic-le@daee10d · GitHub

I will upload recompiled addons later today.

THX.

I did test compilation and now it works, but the latest version is now compatible only with 8.0.2b or my latest test builds. The reason is most likely openSSL.

TVHeadend v. 4.2.2-49 service.tvheadend42-8.1.111b.zip

**kszaq** · June 15, 2017 at 2:10 PM

Yes, I am compiling with LibreSSL to make it compatible with all versions.

tiagovb · June 15, 2017 at 2:21 PM

Quote from afl1

Another test build LibreELEC-S905.arm-8.0-8.0.2-devel-20170615110415-g1286521-I.tar.

It WORKED! Thanks a lot, man!!!

**afl1** · June 15, 2017 at 3:54 PM

Update in #1 with DVB-C fix.

**kszaq** · June 15, 2017 at 4:26 PM

Fixed addons are now uploaded.

**afl1** · June 15, 2017 at 6:42 PM

Quote from kszaq

Fixed addons are now uploaded.

TVHeadend42 doesn't work. Pls increase version to 8.1.112 and use the latest version.

addons: TVHeadend42 4.2.2-49

zbigzbig20 · June 15, 2017 at 7:13 PM

afl1 , I am trying to use your 111a tvh build on my wetek play2 but when I trying to open channels it showing me info no free adapters. Tvh for K series is different from play2?

**afl1** · June 15, 2017 at 7:48 PM

Quote from zbigzbig20

afl1 , I am trying to use your 111a tvh build on my wetek play2 but when I trying to open channels it showing me info no free adapters. Tvh for K series is different from play2?

At first, without debug log I can't help you. Have you verified config via TVHeadend webif? If it is correct, try scan channels.

zbigzbig20 · June 15, 2017 at 8:24 PM

So in adapters tuner is visible and enabled, when I am trying to Force scan nothing happens and tvh in debug window shows that kind of info:

Code

2017-06-15 20:20:31.895 mpegts: 10930H in DVB-S 130E - tuning on Availink AVL6211+AV2011 DVB-S/S2 : DVB-S #0

Code

2017-06-15 20:20:31.895 linuxdvb: Availink AVL6211+AV2011 DVB-S/S2 : DVB-S #0 - DTV_CLEAR failed [e=Inappropriate ioctl for device]

**kszaq** · June 15, 2017 at 8:40 PM

zbigzbig20 I suspect you are using Raybuntu's build - he uses a different way to provide compat ioctls (an old patch of mine), TVHeadend compiled for builds from afl1 or me won't work.

[8.0.2c] LibreELEC 8.0 builds for KI Plus / KII Pro / KI Pro

Similar Threads

S802/S812-Libreelec images for 7/8/9