invalid wifi key

Hey. I have updated le from 10.0.4 to 11.0.0 on a nuc8i3bek with spec https://ark.intel.com/content/www/us…-nuc8i3bek.html every time i try to connect to wifi i get invalid key, connection failed, input/output error. when it connects it only connects with dhcp. it barely takes 2 minutes before it comes up with invalid key and connection error. when I try to switch from dhcp to manual ip, it does not connect to wifi. I use onboard wifi. when it comes with the error mld invalid key I also lose the ssid. i have to deactivate wifi on and off before ssid comes back. I have managed to upload logs to ix.io/4qct and ix.io/4qcu can someone please look at it? something has also happened to the speed of wifi. it's incredibly slow on le 11.0.0 i use the same wifi key on pc, phone and tv so there is nothing wrong with it. i have done a hard reset on le 11.0.0 but same thing. the only thing i have connected to the nuc is a usb receiver for a osmc remote control. i have removed that but same thing. the other thing is a usb hdd.

here is a stupid question. I guess generic and legacy use the same kernel? so there is no point in switch to legacy?

Quote from mglae

There are iwlwifi errors/crashes:

Code

Mar 07 16:34:28.694546 LibreELEC kernel: iwlwifi 0000:00:14.3: Queue 10 is active on fifo 1 and stuck for 10000 ms. SW [208, 224] HW [208, 224] FH TRB=0x0c010a0df
Mar 07 16:34:28.696267 LibreELEC kernel: iwlwifi 0000:00:14.3: Microcode SW error detected. Restarting 0x0.
Mar 07 16:34:28.697666 LibreELEC kernel: iwlwifi 0000:00:14.3: Start IWL Error Log Dump:
[...]
Mar 07 16:34:28.728650 LibreELEC kernel: ieee80211 phy0: Hardware restart was requested

A web search leads to https://bugs.gentoo.org/show_bug.cgi?id=721064. You can try the tips in the last post.

network boot is disable. I have absolutely zero knowledge of how to add this text "add the amsdu_size=3 parameter while loading iwlwifi module"

Quote from mglae

To create the modprobe configuration file:

Code

echo 'option iwlwifi amsdu_size=3' > /storage/.config/modprobe.d/iwlwifi.conf

Then reboot.

And where do i put this? should the text be saved as a special file?

Quote from chewitt

Code

echo 'option iwlwifi amsdu_size=3' > /storage/.config/modprobe.d/iwlwifi.conf
reboot

Login over SSH and run the command ^ and it will create the file, then reboot.

I have no idea how to do that. I will wait for a update ore go back to le 9 where everything works.

i manage to login to le true putty and paste that text in the terminal then reboot

echo 'option iwlwifi amsdu_size=3' > /storage/.config/modprobe.d/iwlwifi.conf

still invalid key

will the nightly build from 12/3 fix the issue?

LibreELEC official nightly builds

same issue with nightly build from 14/3

LibreELEC official nightly builds

and now its impossible to get it online

input/output error

invalid key

connection failed

Quote from heitbaum

There is a WiFi WPA bug fixed in kernel 6.1.19.

These are building for LE11 - 8b01ceb

Should be available in the next 12 hours.

This may fix the reported issue, and if not (at least rule that out.)

** this is in addition to the “iwlwifi amsdu_size=3” discussion above.

My thinking is that we won't see a fix for this before le 12.

Le 12 was written in parentheses for 6.1.19 in the list for nightly builds.

Another thing: Can someone PLEASE! put back the Matrix screensaver in le 11?

clean install with le 11.0.1

well the error messages is gone but now it only gets 169 ip.

have tried to set it to manual ip, but it does not come online.

when you can't make software anymore, you should stop doing it.

what happened after le9? it is just garbage. charge instead and you have to deliver something that actually works.