LE10

    Hi,

    Thought I'd give LE10 a try on my Slice as the RPI3 is now supported, unfortunatley it seems a little unstable. Scrolling though the movies section I can consistently crash Kodi.

    Links for the crash logs http://ix.io/3SlL

    I'm also seeing the following on the boot screen (after i reboot or shutdown), not sure if its all connected...

    Code
    [TIME] Timed out waiting for device /dev/serial1.
[DEPEND] Dependency failed for Broadcom sdio firmware update for BCM43430A1
[111.455310] [813]: Failed to unmount /flash: Device or resource busy
[111.458831] systemd-shutdown[1]: Failed to finalise file systems, loop devices, ignoring.

    No worries if this is not a priority to look at right now I've got my 9.2.8 backup. Maybe it helps with RPI3, maybe it doesn't.

    Cheers

    Drop imageres and fanartres from your advancedsettings.xml, the GPU is running out of (CMA) memory.

    You could also try increasing CMA memory a bit, add eg "dtoverlay=cma,cma-320" or "dtoverlay=cma,cma-384" to config.txt to get 320 or 384 MB instead of the default 256MB - but be careful, better keep image resolution at sane levels.

    You can safely ignore the messages on the screen (and in journal), first two are because Silce/CM3 doesn't have a bluetooth chip, and the other two are normal (and harmless), too.

    so long,

    Hias

    Thanks for the quick reply HiassofT , I've followed your suggestions and its looking much more stable now. I cleared the thumbnail folder too, and while I started off with cma320 which was much better it did still suffer a kodi restart. I'm using cma384 now and its looking good so far.

    Cheers :thumbup:

    Quote from chewitt

    HiassofT are RPi2/3 are still using patchram to load BT firmware? .. these days everything else (AWL/AML/RK) is driven from device-tree. If RPi did the same we wouldn't see that error, no?

    I just checked current RPi OS, it still uses the old hciattach method.

    I guess switching to DT / kernel config might work somehow (latest RPiOS bt-uart script checks for that case) but I'm not sure if it'd catch all cases - like when using the miniuart-bt dtoverlay etc so I didn't dare to touch that area yet.

    so long,

    Hias