Hi @deleonkikko - the VFD driver is not in the kernel presently - there is some previous drivers - search for VFD. The WiFi depending on the model of the TX6 is a WIP in the kernel - but would suggest not soon. Some other info on the TX6 https://linux-sunxi.org/Tanix_TX6
I plan to add support for all 3 wifi variants eventually. It's possible to utilize front display already, if you add device tree overlay to enable I2C bus and then writing some userspace script to drive it. If you want, I can give you more information how to do that.
Some H6 board using RGB port to connect display. from one board I have ,it using RGB port (PD0-PD21) connect Ti DLP3435 , so to support that board ,it need mainline support RGB Display output , then use i2c send some command to dlp3435.(Vendor kernel using opt3435 driver to do that but I can't find source code, only firmware provided)
But now mainline currectly not support RGB output . although it support ,it will also encounter a conflict problem. rgmii phy(RTL8211) share the same pins with RGB port (PD0-PD21).
Anyway , I guess support this type board Display need a long way to go .
This is completely separate issue. Your configuration won't be supported until some developer gets hand on that board and implement support (which may be never).
Planeo agregar soporte para las 3 variantes de wifi eventualmente. Ya es posible utilizar la pantalla frontal, si agrega una superposición de árbol de dispositivos para habilitar el bus I2C y luego escribe un script de espacio de usuario para manejarlo. Si quieres, puedo darte más información sobre cómo hacerlo.
PUes el tema de la pantalla me interesa bastante. En otros dispositivos es sencillo. Buscas su archivo vfd, copiarlo en Storage/config y reiniciar. En LibreElec no sé cómo se haría.
deleonkikko Please edit your post, and translate it into English.
