Display MoreAre there any known issues with SAMBA or SSH?
The device shows as enabled for both services, but I can't ssh or access the samba shares.
I can ping the device, and I can play media off my media server. However I can't access my media player.
Logs:
Nothing seems to stand out in the log to me, but that doesn't mean a whole lot given my ignorance.
Samba works. Just not browse. Put the full share name in \\myserver\myshare
the new addons get build tonight and pushed tomorrow
Do you know when these will be updated online? 10.80.6 is still May 6. I wanted to get netcore 6.0.5 so that arm will work on this test build. 6.0.6 is out now too. I can do it manually but I'd rather do it using the package you created for NextPVR
Martin
Do you know when these will be updated online?
generic and armv7 is online, armv8 failed to build (all addons)
Do you know when these will be updated online? 10.80.6 is still May 6. I wanted to get netcore 6.0.5 so that arm will work on this test build. 6.0.6 is out now too. I can do it manually but I'd rather do it using the package you created for NextPVR
Martin
They are there now.
Does DVB-T2/S2 tuner work with this test image or not?
Does DVB-T2/S2 tuner work with this test image or not?
Only if it's a USB tuner with support in the upstream kernel. Everything dependent on ancient vendor kernel drivers is a firm no.
Are there plans to make the .tar pack available again for nightly release updates?
Hi. I tried the last nightly build on my S905X with a QCA9377 Wireless chip, Wifi is working perfectly but I don't have Bluetooth working. Any idea? Thanks.
http://ix.io/41Fx dmesg
I was looking at picking up a Edal T95M (S905W 1/8g). Does anyone know if it is supported by this build?
Are there plans to make the .tar pack available again for nightly release updates?
There's no need, you can update from .img files too.
Hi. I tried the last nightly build on my S905X with a QCA9377 Wireless chip, Wifi is working perfectly but I don't have Bluetooth working. Any idea? Thanks. http://ix.io/41Fx dmesg
The P212 device-tree describes hardware with a Broadcom compatible chip, so the wrong driver is probed. What is the box?
I was looking at picking up a Edal T95M (S905W 1/8g). Does anyone know if it is supported by this build?
`There is no specific device-tree for the box but other S905W devices may work. Don't expect anything greater than 1080p.
The P212 device-tree describes hardware with a Broadcom compatible chip, so the wrong driver is probed. What is the box?
My box is some custom model board from Geniatech sold in Portugal as TBee.
I have some pictures of the board.
https://imgur.com/a/R5z1azA
Edit: Using the Nexbox A95X which also has a QCA9377 chip I get Bluetooth disabled by default, by activating the Bluetooth I get the "No Bluetooth adapter found" message again, but the dmesg is different.
http://ix.io/41GT dmesg
There's no need, you can update from .img files too.
Thanks, it works! I didn't know about this and until now I was manually extracting the kernel and system from the img and replacing 
My box is some custom model board from Geniatech sold in Portugal as TBee. Using the Nexbox A95X which also has a QCA9377 chip I get Bluetooth disabled by default, by activating the Bluetooth I get the "No Bluetooth adapter found" message again, but the dmesg is different
The Nexbox A95X device-tree doesn't have any references to WiFi or BT devices. WiFi gets found since it's attached to SDIO which is described and acts like a bus with connected devices, but BT is a serial device that needs to be explicitly described with device type or the kernel doesn't know what to probe for.
Please boot https://chewitt.libreelec.tv/testing/LibreE…85.0-box.img.gz - I've added an experimental device-tree for the box that should get BT working.
The Nexbox A95X device-tree doesn't have any references to WiFi or BT devices. WiFi gets found since it's attached to SDIO which is described and acts like a bus with connected devices, but BT is a serial device that needs to be explicitly described with device type or the kernel doesn't know what to probe for.
Please boot https://chewitt.libreelec.tv/testing/LibreE…85.0-box.img.gz - I've added an experimental device-tree for the box that should get BT working.
Started working perfectly, thank you so much!!
Edit: Also everything I've tested with video playback has been perfect and smooth!!
Started working perfectly, thank you so much!! Edit: Also everything I've tested with video playback has been perfect and smooth!!
Nice to hear. Can you please share the URL from "dmesg | paste" so I can check the boot log.
Nice to hear. Can you please share the URL from "dmesg | paste" so I can check the boot log.
Thank you!
http://ix.io/41Nk dmesg here
