Kernel panic and unable to boot after update

Meiden · March 23, 2016 at 1:43 PM

I tried to update from OE 6.95.1 to LE RPi2.arm-7.0-Milhouse-20160322183009-#0322b-g2f1b279 build and it resulted in a Kernel Panic.

After that, I went back to my OE backup and I updated RPi2.arm-7.0-devel-20160321035214-#0321-g3ab346e.tar successfully.

Is that .tar file bugged?

**DaVu** · March 23, 2016 at 2:06 PM Official Post

That would be strange. We tested that yesterday in the evening and had the same issue. We reported and Milhouse fixed it. I installed #322b myself yesterday in the evening without having issues.

I'll report to him.

Cheers

Meiden · March 23, 2016 at 2:17 PM

Thank you very much.
[hr]

Quote from David1977

That would be strange. We tested that yesterday in the evening and had the same issue. We reported and Milhouse fixed it. I installed #322b myself yesterday in the evening without having issues.

I'll report to him.

Cheers

Sorry mate, I didn't realize that you changed the file in the downloads directory. You are right, my problem was with #322, not with #322b.

I'm going to try the new version right now.

Thank you mate.
[hr]
Working like a charm.

Thank you!

**milhouse** · March 23, 2016 at 7:18 PM

There was a problem booting #0322 (which is no longer available on the server) but the problem is fixed in #0322b, unless it's a different problem. Can you grab a screenshot/photo if it happens again?

Meiden · March 24, 2016 at 10:25 AM

Quote from milhouse

There was a problem booting #0322 (which is no longer available on the server) but the problem is fixed in #0322b, unless it's a different problem. Can you grab a screenshot/photo if it happens again?

Sorry Milhouse, my problem was with #0322 build, and I didn't realize that you updated the file on the repository after that. I've just flashed the new #0322b build and it's working flawlessly.

Thank you very much and sorry for the confussion. My mistake.

DoubyCz · December 12, 2018 at 5:42 PM

same problem here (10-20x reboots ok and then kernel panic when booting, rpi chip is really hot, i cant touch it for long)

LibreElec ISO image: LibreELEC-RPi2.arm-8.2.5.img

RPI3b+ without aditional cooling

SD card: new unpacked, Kingston UHC-I 16GB

crash LOG: http://paste.ubuntu.com/p/ptgb6zw4vz/

screenshot attached

**CvH** · December 12, 2018 at 8:00 PM Official Post

Quote from DoubyCz

LibreElec ISO image: LibreELEC-RPi2.arm-8.2.5.img

pls try the latest LibreELEC 9 Alpha releases with Kodi18, there are no updates planed to 8.2

huck · December 13, 2018 at 1:14 AM

Quote from DoubyCz

, rpi chip is really hot, i cant touch it for long)

LibreElec ISO image: LibreELEC-RPi2.arm-8.2.5.img

RPI3b+ without aditional cooling

SD card: new unpacked, Kingston UHC-I 16GB

crash LOG: http://paste.ubuntu.com/p/ptgb6zw4vz/

screenshot attached

Display More

Can't say if its the firmware but saw a similar issue on an old rpi 2. Got burning hot and would freeze after an update. The problem was due to a poorly designed nes retro case that underpowered it too long. Eventually burnt out the fuse permanently and killed it. Now it only boots up for a few seconds. Just so happen to all occur after an update. But it was the case's fault. Probably would have happened on any new reboot. Bad timing for me. I never noticed a power issue til it was too late.