Geniatech HDStar DVB-S2 support

  • Your not alone, trying to let work the damn thing for months, Raspberry and amlogic S905 box.
    They should forbid to sell those things.
    I was trying to compile with kaszaq 's sources and a patch that I had found;
    OpenELEC Mediacenter - OpenELEC Forum - Anyone with a HD Star DVB-S2 Version ***3.0*** (1/1)


    I do not have much experience in compiling though.


    cheers!

    Raspberry Pi2 LibreELEC Milhouse nightly builds

    Q-Box 2G/8G and Q-Box 2G/16G LibreELEC 8.2 kszaq 's
    NexBox A95x balbes150 Armbian_5.32_S9xxx_Debian_jessie_3.14.29_server_20170907 with tvheadend and OScam.
    Digibit R1 Sat>IP server. (80 cm. dish with disecq 4/2 (28.2E, 23.5E, 13.0E, 19.2E) and fixed 90 cm. dish at 30.0W)

    4 x TP-LINK TL-PA411


  • This tuner works in latest afl1 dev build of le8 . To download in amlogic thread in pinned thread


    Hi zbigzbig20, Is this the right link?


    LibreELEC


    regards, Jefken.

    Raspberry Pi2 LibreELEC Milhouse nightly builds

    Q-Box 2G/8G and Q-Box 2G/16G LibreELEC 8.2 kszaq 's
    NexBox A95x balbes150 Armbian_5.32_S9xxx_Debian_jessie_3.14.29_server_20170907 with tvheadend and OScam.
    Digibit R1 Sat>IP server. (80 cm. dish with disecq 4/2 (28.2E, 23.5E, 13.0E, 19.2E) and fixed 90 cm. dish at 30.0W)

    4 x TP-LINK TL-PA411

  • I can comfirm that indeed this tuner is working as discribed above!
    I can't scan with Disecq switch though, anyone who can help me on this?
    Question is if this is because off my switch, tvheadend or the tuner?


    regards, Jefken

    Raspberry Pi2 LibreELEC Milhouse nightly builds

    Q-Box 2G/8G and Q-Box 2G/16G LibreELEC 8.2 kszaq 's
    NexBox A95x balbes150 Armbian_5.32_S9xxx_Debian_jessie_3.14.29_server_20170907 with tvheadend and OScam.
    Digibit R1 Sat>IP server. (80 cm. dish with disecq 4/2 (28.2E, 23.5E, 13.0E, 19.2E) and fixed 90 cm. dish at 30.0W)

    4 x TP-LINK TL-PA411

    Edited once, last by Jefken ().


  • I can comfirm that indeed this tuner is working as discribed above!
    I can't scan with Disecq switch though, anyone who can help me on this?
    Question is if this is because off my switch, tvheadend or the tuner?


    regards, Jefken


    have you configured tvh with the correct sat for the correct diseqc port..


    e.g. setup your sats in network.
    then in dvb inputs, change the universal lnb to whatever diseqc switch you have, then put each network in the correct switch port.

  • have you configured tvh with the correct sat for the correct diseqc port..


    e.g. setup your sats in network.
    then in dvb inputs, change the universal lnb to whatever diseqc switch you have, then put each network in the correct switch port.


    Thanks for Your reply,


    No that doesn't work, it has something to do with the voltage off the tuner


    [/code]


    regards, Jefken.

    Raspberry Pi2 LibreELEC Milhouse nightly builds

    Q-Box 2G/8G and Q-Box 2G/16G LibreELEC 8.2 kszaq 's
    NexBox A95x balbes150 Armbian_5.32_S9xxx_Debian_jessie_3.14.29_server_20170907 with tvheadend and OScam.
    Digibit R1 Sat>IP server. (80 cm. dish with disecq 4/2 (28.2E, 23.5E, 13.0E, 19.2E) and fixed 90 cm. dish at 30.0W)

    4 x TP-LINK TL-PA411

  • Sorry Guys,


    How stupid, It 's a simple question off coax cable who was not good connected :blush:
    Things are scanning now, finally, I had bought me two off these last year for christmas, untill now without succes,... thanks to afl1 some progress, now installing OScam and descramble my channels and making a decent channel list,
    I'm curious wheter epg and subtitles would work over my network.


    Cheers,


    Jefken.

    Raspberry Pi2 LibreELEC Milhouse nightly builds

    Q-Box 2G/8G and Q-Box 2G/16G LibreELEC 8.2 kszaq 's
    NexBox A95x balbes150 Armbian_5.32_S9xxx_Debian_jessie_3.14.29_server_20170907 with tvheadend and OScam.
    Digibit R1 Sat>IP server. (80 cm. dish with disecq 4/2 (28.2E, 23.5E, 13.0E, 19.2E) and fixed 90 cm. dish at 30.0W)

    4 x TP-LINK TL-PA411