Help with a Ki Plus S2/T2

  • Hello, I´m new here. I read a lot of post and messages. I have an Ki Plus with S2/T2 tunner

    I have the LibreElec Working (LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.003.tar)

    but i´m trying to config the TVHeadEnd and it doesn´t works, detects the tunners, but not search, always fail. I watch some tutorials for setup.

    Can someone, help me, please? I don´t if I need a specific tree or whats its the problem. The two tunners working?

    Please help me. Thank you.

    Edited once, last by heisenberghdf (October 5, 2016 at 10:13 PM).

  • If you have other system that you can scan tvheadend successfully, you may try copy the working config folder and paste it to your Ki plus.

    Then go to web interface to enable Ki's tuner again. This works for me on K2 pro.


  • Hello, I´m new here. I read a lot of post and messages. I have an Ki Plus with S2/T2 tunner

    I have the LibreElec Working (LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.003.tar)

    but i´m trying to config the TVHeadEnd and it doesn´t works, detects the tunners, but not search, always fail. I watch some tutorials for setup.

    Can someone, help me, please? I don´t if I need a specific tree or whats its the problem. The two tunners working?

    Please help me. Thank you.

    Your LE version doesn't support tunner. You need LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.004


  • Ok, i have changed to this version. The same problem. Tvheadend, before search, all in fail. I don´t know what´s the problem...

    Can u check your SAT with another receiver?
    Nobody is reporting this issue. I am using same box with Tvheadend without any receiving problems.

  • Can u check your SAT with another receiver?
    Nobody is reporting this issue. I am using same box with Tvheadend without any receiving problems.

    My sat is working perfect with others. I think that i have doing something wrong but i don't know. Can i speak with you to help me, please?

  • I watch and do the same of this tutorial. Maybe i need to install for this repository?

    You use another tree? Changes something of tvheadend?
    Detects the tunners, but in search, at the end, fail...


  • I watch and do the same of this tutorial. Maybe i need to install for this repository?

    You use another tree? Changes something of tvheadend?
    Detects the tunners, but in search, at the end, fail...

    try choose orbital position for satellite. not predifine mux. setting transponder freq,fec,etc on mux tab manually. the tuner will detects other transponder n scan automatically. at least one transpoder is set.

    Edited once, last by qashaf (October 6, 2016 at 2:08 PM).

  • I try this. Scan result: Fail... :(
    2016-10-06 13:46:10.410 mpegts: 1072.9V in Astra - tuning on Availink AVL6862 : DVB-S #02016-10-06 13:46:10.434 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to tune [e=Invalid argument]

    Edited once, last by heisenberghdf (October 6, 2016 at 2:48 PM).


  • I try this. Scan result: Fail... :(
    2016-10-06 13:46:10.410 mpegts: 1072.9V in Astra - tuning on Availink AVL6862 : DVB-S #02016-10-06 13:46:10.434 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to tune [e=Invalid argument]

    follow this for astra

    External Content www.youtube.com
    Content embedded from external sources will not be displayed without your consent.
    Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.


  • I try this. Scan result: Fail... :(
    2016-10-06 13:46:10.410 mpegts: 1072.9V in Astra - tuning on Availink AVL6862 : DVB-S #02016-10-06 13:46:10.434 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to tune [e=Invalid argument]

    Hi heisenberghdf,
    failed to tune [e=Invalid argument] means that something of input settings is wrong. See via SSH with comand dmesg and see what is wrong in log.

  • There is a part of the log:

    [26976.901090@1] i2c i2c-1: avl6862_tune: START!
    [26976.981384@1] [AVL_Check_LockStatus] channel unlocked!
    [26976.981451@1] i2c i2c-1: avl6862_read_status: LOCK_STATUS=0x0
    [26977.181083@1] i2c i2c-1: avl6862_tune: START!
    [26977.261321@1] [AVL_Check_LockStatus] channel unlocked!
    [26977.261356@1] i2c i2c-1: avl6862_read_status: LOCK_STATUS=0x0

    Repeat the same...
    [hr]
    Finaly, it´s works with tvheadend 4.0.9... My question is, the DVB-T tuner works also?

    Edited once, last by heisenberghdf (October 6, 2016 at 11:42 PM).