Help with a Ki Plus S2/T2

If you have other system that you can scan tvheadend successfully, you may try copy the working config folder and paste it to your Ki plus.

Then go to web interface to enable Ki's tuner again. This works for me on K2 pro.

Quote from heisenberghdf

Hello, I´m new here. I read a lot of post and messages. I have an Ki Plus with S2/T2 tunner

I have the LibreElec Working (LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.003.tar)

but i´m trying to config the TVHeadEnd and it doesn´t works, detects the tunners, but not search, always fail. I watch some tutorials for setup.

Can someone, help me, please? I don´t if I need a specific tree or whats its the problem. The two tunners working?

Please help me. Thank you.

Your LE version doesn't support tunner. You need LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.004

Quote from heisenberghdf

Ok, i have changed to this version. The same problem. Tvheadend, before search, all in fail. I don´t know what´s the problem...

Can u check your SAT with another receiver?
Nobody is reporting this issue. I am using same box with Tvheadend without any receiving problems.

Quote from heisenberghdf

My sat is working perfect with others. I think that i have doing something wrong but i don't know. Can i speak with you to help me, please?

I am not expert for tvheadend. Watch this tutorial: WeTek Play - How to install tvheadend and scan Satellite DVB-S/S2 channels

Quote from heisenberghdf

I watch and do the same of this tutorial. Maybe i need to install for this repository?

You use another tree? Changes something of tvheadend?
Detects the tunners, but in search, at the end, fail...

try choose orbital position for satellite. not predifine mux. setting transponder freq,fec,etc on mux tab manually. the tuner will detects other transponder n scan automatically. at least one transpoder is set.

Quote from heisenberghdf

I try this. Scan result: Fail...
2016-10-06 13:46:10.410 mpegts: 1072.9V in Astra - tuning on Availink AVL6862 : DVB-S #02016-10-06 13:46:10.434 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to tune [e=Invalid argument]

follow this for astra

Quote from heisenberghdf

Same error: DVB-S #0 - failed to tune [e=Invalid argument]

Can you give me your files of the SD Card? This is the last that i want to check... I don´t know whats its the problem.

actually, my box is k2pro combo

...I am using a K1 Plus with LibreELEC, DVB-S2 and VDR without any problems.

Cheers
Mark

Gesendet von meinem H60-L04 mit Tapatalk

Quote from heisenberghdf

I try this. Scan result: Fail...
2016-10-06 13:46:10.410 mpegts: 1072.9V in Astra - tuning on Availink AVL6862 : DVB-S #02016-10-06 13:46:10.434 linuxdvb: Availink AVL6862 : DVB-S #0 - failed to tune [e=Invalid argument]

Hi heisenberghdf,
failed to tune [e=Invalid argument] means that something of input settings is wrong. See via SSH with comand dmesg and see what is wrong in log.