Hello
been running Oscam in android
But does not respond DTV and Launcher2
Not work on ENIGMA 2
[hr]
oscam in
libreelec ..... Ok 
ENIGMA 2 ..... NOK 
software android K2pro .... NoK 
wicardd 1.18
ENIGMA 2 ..... OK 
libreelec ..... NOk 
software android K2pro .... NoK
Hello
been running Oscam in android
But does not respond DTV and Launcher2Not work on ENIGMA 2
[hr]
oscam inlibreelec ..... Ok
ENIGMA 2 ..... NOK
software android K2pro .... NoK
wicardd 1.18
ENIGMA 2 ..... OK
libreelec ..... NOk
software android K2pro .... NoK
hi k2pro, how to activate or running wicard emulator in enigma2? i know to configure but dont know to run the wicard.
hi k2pro, how to activate or running wicard emulator in enigma2? i know to configure but dont know to run the wicard.
Hello
wicarrd Built with the image runs automatically
a path /user/conf/wicard/wicard
/user/config/wicard/wicarrd.conf
cd /usr/config/wicard; ./wicardd -c /usr/config/wicard/wicardd.conf
and Enter telnet
run command top
You may install pulgin AlternativeSoftCamManager
Now look for copies Oscam of works in enigma2
[hr]
[hr]
Hello
been running Oscam in android
But does not respond DTV and Launcher2Not work on ENIGMA 2
[hr]
oscam inlibreelec ..... Ok
ENIGMA 2 ..... NOK
software android K2pro .... NoK
wicardd 1.18
ENIGMA 2 ..... OK
libreelec ..... NOk
software android K2pro .... NoK
can you tell us how to enter clines in oscam under libreelec? I use vdr
afl1 before I spend too much time going down a dead end...do you think it is possible to include the additional dvb support files that are in these CVH builds? LibreELEC
Specifically I'm looking to include the driver crazycat mentions here: LibreELEC
I'm happy to do the work in trying to build the drivers into your source, but before I do I thought I'd see if you think it's possible.
hi
todayoscam in
ENIGMA 2 ..... OK
which version and how you did it?
which version and how you did it?
version 11272 wetekplay
[hr]
oscam in
libreelec ..... Ok
ENIGMA 2 ..... OK
neutrino ...... NOK
VDR ...... OK
software android K2pro .... NoK
wicardd 1.18
ENIGMA 2 ..... OK
neutrino .......... OK
VDR ..... NOK
libreelec ..... NOk
software android K2pro .... NoK
afl1 before I spend too much time going down a dead end...do you think it is possible to include the additional dvb support files that are in these CVH builds? LibreELECSpecifically I'm looking to include the driver crazycat mentions here: LibreELEC
I'm happy to do the work in trying to build the drivers into your source, but before I do I thought I'd see if you think it's possible.
It is impossible as it have to be loadable dvb_core kernel modul and in my build is build-in.
Hey everyone i was hoping someone can point me in the right direction I have the k2pro with the latest build, vdr dvb-t scan works well but when I use dvb-s I get no channels, when using the dtv app in stock android I pick up channels if i do a blind scan, but not auto. not sure if I have to somehow do a blind scan in VDR. im using optus d1 160e if that helps. thanks in advance 
Update with latest kszaq's patches (7.0.2.008):LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.004.3.img.gz - removedLibreELEC-Amlogic.aarch64-KII_Pro-7.0.2.004.3.img.gz - removed
Update with latest kszaq's patches (7.0.2.008):
LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.004.3.img.gz
LibreELEC-Amlogic.aarch64-KII_Pro-7.0.2.004.3.img.gz
Are the tuners and all working in this version?
I´m trying the plus version, but not boot. Need to tup like an update or can i write in the SD card and boot?
Thank you!
Update with latest kszaq's patches (7.0.2.008):
LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.004.3.img.gz
LibreELEC-Amlogic.aarch64-KII_Pro-7.0.2.004.3.img.gz
Thank you very match for your work 
Just a question please about multiboot :
Suppose we have a new BOX not yet configured to boot from SDCARD, and we boot it directly from Android on NAND and we want, from within Android, to reboot from the SDCARD (without using the reset button).
Do you think that with an appropriate app, or a script, we can do that ?
k1 does not start with LE 7.0.2.004.3
Thank you very match for your work
Just a question please about multiboot :
Suppose we have a new BOX not yet configured to boot from SDCARD, and we boot it directly from Android on NAND and we want, from within Android, to reboot from the SDCARD (without using the reset button).
Do you think that with an appropriate app, or a script, we can do that ?
Use power button on RC.
Use power button on RC.
Sorry, but I think you have not understand me 
The quetion is, the BOX boot exclusivly from NAND (if we do nothing de special, sush as use the toothpick trick)
If we use power button, it will switch OFF the box, and while switching it ON it will boots Android from NAND, as usual.
From within Android, can we force reboot from SDCARD, even without the toothpick trick ?
Sorry, but I think you have not understand me
The quetion is, the BOX boot exclusivly from NAND (if we do nothing de special, sush as use the toothpick trick)
If we use power button, it will switch OFF the box, and while switching it ON it will boots Android from NAND, as usual.From within Android, can we force reboot from SDCARD, even without the toothpick trick ?
No, only if you create special android app setting environment variables.
I tried cean install to sdcard (K1Plus) with LibreELEC-Amlogic.aarch64-KI_Plus-7.0.2.004.3.img.gz, but not boot.
Sorry, I included wrong dtb.img. You can replace it from previous version. I
