"no signal" with xbian kernel on imx

lbm · April 27, 2016 at 7:20 PM

Quote from vpeter
To resolve issue with no signal some logs are required from ssh console
Code
dmesg | pastebinit
pastebinit /storage/.kodi/temp/kodi.log

Here you go:

bABc
AJGZ

Thanks!

danielk · April 28, 2016 at 5:59 AM

here are mines
HTUE
DjUc

vpeter, i have minus issues with your image. are they the same?(except the logo, and the kodi option i asked
you to untick?)

edit
mine was a fresh install.
after reboot via yatse, it boot and got screen

**koenkooi** · April 28, 2016 at 1:02 PM

And a 'me too' for having 'No Signal' after updating openelec to libreelec using the tar:

dmesg
kodi.log

**vpeter** · April 29, 2016 at 1:42 PM

LibreELEC-imx6.arm-7.0.0-no.signal.test.img.gz
view?usp=sharing

Please send both logs with this image and mk01 will look them.
Image has kodi running in debug mode, ssh is also enabled by default.
It has some extra Kodi and Linux patches.

Note to myself: pass_events == 0, videoscreen.updateresolutions == true.

**koenkooi** · April 29, 2016 at 1:59 PM

\o/ HDMI is working again using this build.

dmesg
kodi.log

danielk · April 29, 2016 at 2:40 PM

vpeter, here are my tests.
on boot, screen was always on and off.

dmesg
LZBd
kodi.log
JZdd

when got screen, was inpossible to go to settings\system(to change resolution)
here is the crash log
gWEC

vpeter, maybe for an idea...is to boot by default to 1980X1080 resolution...just a thought

edit2 i can't work with last "official" version with yatse. i can sync my libraries and reboot.
but buttons are not working, also keyboard doesn't work via yatse. no prob in OE beta...

m.hueske · April 29, 2016 at 7:20 PM

Here is mine.

dmesg
ZZgd

kodi.log
aKfY

Again, uBoot screen is ok, after this "no signal"

danielk · May 1, 2016 at 7:47 PM

vpeter, we have a discussion about this problem in a local forum in my country.
someone have mentioned something, that you should consider.

some problems where with TV that don't support FULL HD, or can't downgrade automatcly.
second prob is that LE with kernel 4.4, start with low resolution and low rate.
it will be a good thinking to make a test image, that starts with 1980*1080 with 60 KHZ.

just a thought that wanted to share.

**vpeter** · May 2, 2016 at 7:43 AM

I point logs to mk01. And when he cook something then we can move forward.
Until then it is the situation as is.

danielk · May 2, 2016 at 7:45 AM

Is he reading our suggestions in this forum?

Sent from my SM-E500F using Tapatalk

danielk · May 3, 2016 at 4:14 PM

is it possible to open a specific thread for cubox under cummunity builds thread? think it'll better for all.

**vpeter** · May 3, 2016 at 4:22 PM

Quote from danielk

Is he reading our suggestions in this forum?

Yes, he is reading and aware of the issue. When he cooked something we will know.
Because this issue doesn't happen with my tv I can't help much.

korrupto · May 4, 2016 at 8:28 AM

I have same problem, previous version working and the last not working.
Thanks.

danielk · May 4, 2016 at 8:34 AM

Quote from korrupto

I have same problem, previous version working and the last not working.
Thanks.

Please be aware that it's le7 and not le8 as posted in solid-run forum.

Sent from my SM-E500F using Tapatalk

korrupto · May 4, 2016 at 8:45 AM

I mean udk's alpha previous version.

danielk · May 4, 2016 at 12:44 PM

I do get screen and it's working here, so can't help with this.

Sent from my SM-E500F using Tapatalk
[hr]

Quote from korrupto

I mean udk's alpha previous version.

I mean here...
you have to post about alpha in solid run forum.

Sent from my SM-E500F using Tapatalk

lpuerto · May 7, 2016 at 6:29 AM

My two cents:

dmesg
HBDe

kodi.log
EHAR

danielk · May 16, 2016 at 11:38 AM

any news about this vpeter?