make distclean
make
sudo make install
Thank you very much
make distclean
make
sudo make install
Thank you very much
is is possible that I fu up the patch - the tree is rather messy and has pre applied patches (wtf really)
you could try at ubuntu if it works there, if it also doesn't works there the driver is broken
It doesn't work on Ubuntu either:
It doesn't work on Ubuntu either
same error ...
idk who is you vendor but pls ask him again to send some working driver
It doesn't work on Ubuntu either:
can you try with 4.4 kernel ? Ubuntu 14.04.05 or 16.04.xx ?
can you try with 4.4 kernel ? Ubuntu 14.04.05 or 16.04.xx ?
I tried before, and it says that 4.7 or higher is required.
I asked him again he sent me the driver for windows and he insists that the linux driver is the proper one.
From the log you can see that it was properly installed but not working
From the log you can see that it was properly installed but not working
Yep, i know. Obviusly the driver doesn't work.
Thanks for your support.
in my repo this geniatech specific ds3000 driver present as ds3k (also present original V4L DVB ds3000 frontend driver).
i change dw2102 driver for using ds3k for su3000 devices and this work with my old HDStar with TS2020/DS3000. Kernel 4.4 (Kubuntu 14.04.05)
And i not see any new ds3103 revision support in this driver. So this geniatech media_build just updated to latest kernels/distros since first from end 2014.
04.07.2018 23:45:13 usb 1-1.3 new high-speed USB device number 10 using ehci-pci
04.07.2018 23:45:13 usb 1-1.3 New USB device found, idVendor=1f4d, idProduct=3000
04.07.2018 23:45:13 usb 1-1.3 New USB device strings: Mfr=1, Product=2, SerialNumber=3
04.07.2018 23:45:13 usb 1-1.3 Product: USB Stick
04.07.2018 23:45:13 usb 1-1.3 Manufacturer: Max
04.07.2018 23:45:13 usb 1-1.3 SerialNumber: 080116
04.07.2018 23:45:13 dw2102 su3000_identify_state
04.07.2018 23:45:13 dvb-usb found a 'SU3000HD DVB-S USB2.0' in warm state.
04.07.2018 23:45:13 dw2102 su3000_power_ctrl: 1, initialized 0
04.07.2018 23:45:13 dvb-usb will pass the complete MPEG2 transport stream to the software demuxer.
04.07.2018 23:45:13 dvbdev DVB: registering new adapter (SU3000HD DVB-S USB2.0)
04.07.2018 23:45:13 usb 1-1.3 media controller created
04.07.2018 23:45:13 dvb-usb MAC address: 00:af:78:66:33:0d
04.07.2018 23:45:13 dvbdev dvb_create_media_entity: media entity 'dvb-demux' registered.
04.07.2018 23:45:13 ds3k_attach
04.07.2018 23:45:13 ds3k_readreg read reg 0x00, value 0xe0
04.07.2018 23:45:13 ds3k_readreg read reg 0x01, value 0xc0
04.07.2018 23:45:13 ds3k_readreg read reg 0x02, value 0x00
04.07.2018 23:45:13 DS3000 chip version 0.192 attached.
04.07.2018 23:45:13 ds3k_readreg read reg 0x01, value 0xc0
04.07.2018 23:45:13 ds3k_readreg read reg 0x02, value 0x00
04.07.2018 23:45:13 ds3k_readreg read reg 0xb2, value 0x01
04.07.2018 23:45:13 Chip ID = [DS300X]!
04.07.2018 23:45:13 usb 1-1.3 DVB: registering adapter 11 frontend 0 (Montage Technology DS3000/TS2020)...
04.07.2018 23:45:13 dvbdev dvb_create_media_entity: media entity 'Montage Technology DS3000/TS2020' registered.
04.07.2018 23:45:13 Registered IR keymap rc-su3000
04.07.2018 23:45:13 rc rc0 SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0
04.07.2018 23:45:13 input SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0/input12
04.07.2018 23:45:13 rc rc0 lirc_dev: driver dw2102 registered at minor = 0, scancode receiver, no transmitter
04.07.2018 23:45:13 dvb-usb schedule remote query interval to 150 msecs.
04.07.2018 23:45:13 dw2102 su3000_power_ctrl: 0, initialized 1
04.07.2018 23:45:13 dvb-usb SU3000HD DVB-S USB2.0 successfully initialized and connected.
Display Morein my repo this geniatech specific ds3000 driver present as ds3k (also present original V4L DVB ds3000 frontend driver).
i change dw2102 driver for using ds3k for su3000 devices and this work with my old HDStar with TS2020/DS3000. Kernel 4.4 (Kubuntu 14.04.05)
And i not see any new ds3103 revision support in this driver. So this geniatech media_build just updated to latest kernels/distros since first from end 2014.
04.07.2018 23:45:13 usb 1-1.3 new high-speed USB device number 10 using ehci-pci
04.07.2018 23:45:13 usb 1-1.3 New USB device found, idVendor=1f4d, idProduct=3000
04.07.2018 23:45:13 usb 1-1.3 New USB device strings: Mfr=1, Product=2, SerialNumber=3
04.07.2018 23:45:13 usb 1-1.3 Product: USB Stick
04.07.2018 23:45:13 usb 1-1.3 Manufacturer: Max
04.07.2018 23:45:13 usb 1-1.3 SerialNumber: 080116
04.07.2018 23:45:13 dw2102 su3000_identify_state
04.07.2018 23:45:13 dvb-usb found a 'SU3000HD DVB-S USB2.0' in warm state.
04.07.2018 23:45:13 dw2102 su3000_power_ctrl: 1, initialized 0
04.07.2018 23:45:13 dvb-usb will pass the complete MPEG2 transport stream to the software demuxer.
04.07.2018 23:45:13 dvbdev DVB: registering new adapter (SU3000HD DVB-S USB2.0)
04.07.2018 23:45:13 usb 1-1.3 media controller created
04.07.2018 23:45:13 dvb-usb MAC address: 00:af:78:66:33:0d
04.07.2018 23:45:13 dvbdev dvb_create_media_entity: media entity 'dvb-demux' registered.
04.07.2018 23:45:13 ds3k_attach
04.07.2018 23:45:13 ds3k_readreg read reg 0x00, value 0xe0
04.07.2018 23:45:13 ds3k_readreg read reg 0x01, value 0xc0
04.07.2018 23:45:13 ds3k_readreg read reg 0x02, value 0x00
04.07.2018 23:45:13 DS3000 chip version 0.192 attached.
04.07.2018 23:45:13 ds3k_readreg read reg 0x01, value 0xc0
04.07.2018 23:45:13 ds3k_readreg read reg 0x02, value 0x00
04.07.2018 23:45:13 ds3k_readreg read reg 0xb2, value 0x01
04.07.2018 23:45:13 Chip ID = [DS300X]!
04.07.2018 23:45:13 usb 1-1.3 DVB: registering adapter 11 frontend 0 (Montage Technology DS3000/TS2020)...
04.07.2018 23:45:13 dvbdev dvb_create_media_entity: media entity 'Montage Technology DS3000/TS2020' registered.
04.07.2018 23:45:13 Registered IR keymap rc-su3000
04.07.2018 23:45:13 rc rc0 SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0
04.07.2018 23:45:13 input SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0/input12
04.07.2018 23:45:13 rc rc0 lirc_dev: driver dw2102 registered at minor = 0, scancode receiver, no transmitter
04.07.2018 23:45:13 dvb-usb schedule remote query interval to 150 msecs.
04.07.2018 23:45:13 dw2102 su3000_power_ctrl: 0, initialized 1
04.07.2018 23:45:13 dvb-usb SU3000HD DVB-S USB2.0 successfully initialized and connected.
Sorry, english isn't my native tongue, and I don't know if I'm understanding you. Do you mean that you had to change dw2102 driver in order to get your old HDStar working on Ubuntu? Is that possible with this new revision?
PS: it's a shame because I updated to 4.13 kernel because it was needed to build the driver. I dind't save any log of the building process in 4.4 and idk how to boot in 4.4 again from ssh.
CvH crazycat last message from my supplier (literally):
I try a mail, we already try around at geniatech to get some sample but due there company structure it is rather difficult to get something.
Even worse none of us has any hardware to test. Maybe I get some kind of helpful reply.
Sounds like same issue here with a brand new Mygica HDStar DVB-S2 USB. Not appearing in TVheadend tuner list under both LibreElec 8.2.5 official and Ubuntu server 18.04 with kernel 4.16. Relevant section of dmesg from Ubuntu below:
and lsusb -v:
And in /dev/dvb:
Have tried with dvb-fe-ds3000.fw in /lib/firmware. Are we waiting for new drivers or firmware for these devices then? Is there a good thread to follow for progress on this issue? Let me know if there's more info anyone needs as I'm not a linux expert myself. Also want to thank everyone here for lots of help over the past 2 years!
I mailed geniatech, got an reply with exactly the same driver (not a single word to the attached dmesg etc) and after a writing back that this driver is not working I got no reply. Idk if trsqr
got finally his test sample to write some driver. At the moment it looks like that the vendors don't give a fu
Hello, is there anything new?
nope - at least nothing that came to my attention
geniatech was not even able to give any feedback besides some boilerplate
other vendors don't react at all (even after they promised to send a sample)
i not sure about new ds3103 version