Geniatech Mygica HDStar DVB-S2 USB HD not working

Meiden · July 2, 2018 at 3:39 PM

Quote from crazycat

make distclean

make

sudo make install

Thank you very much

**CvH** · July 2, 2018 at 9:44 PM Official Post

is is possible that I fu up the patch - the tree is rather messy and has pre applied patches (wtf really)

you could try at ubuntu if it works there, if it also doesn't works there the driver is broken

Meiden · July 3, 2018 at 4:58 PM

It doesn't work on Ubuntu either:

External Content pastebin.com

Content embedded from external sources will not be displayed without your consent.

Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

**CvH** · July 3, 2018 at 6:01 PM Official Post

Quote from Meiden

It doesn't work on Ubuntu either

same error ...

idk who is you vendor but pls ask him again to send some working driver

**crazycat** · July 3, 2018 at 9:54 PM

Quote from Meiden

It doesn't work on Ubuntu either:

can you try with 4.4 kernel ? Ubuntu 14.04.05 or 16.04.xx ?

Meiden · July 4, 2018 at 9:58 AM

Quote from crazycat

can you try with 4.4 kernel ? Ubuntu 14.04.05 or 16.04.xx ?

I tried before, and it says that 4.7 or higher is required.

Meiden · July 4, 2018 at 3:32 PM

I asked him again he sent me the driver for windows and he insists that the linux driver is the proper one.

**CvH** · July 4, 2018 at 5:17 PM Official Post

From the log you can see that it was properly installed but not working

Meiden · July 4, 2018 at 7:39 PM

Quote from CvH

From the log you can see that it was properly installed but not working

Yep, i know. Obviusly the driver doesn't work.

Thanks for your support.

**crazycat** · July 4, 2018 at 9:46 PM

in my repo this geniatech specific ds3000 driver present as ds3k (also present original V4L DVB ds3000 frontend driver).

i change dw2102 driver for using ds3k for su3000 devices and this work with my old HDStar with TS2020/DS3000. Kernel 4.4 (Kubuntu 14.04.05)

And i not see any new ds3103 revision support in this driver. So this geniatech media_build just updated to latest kernels/distros since first from end 2014.

Display Spoiler

04.07.2018 23:45:13 usb 1-1.3 new high-speed USB device number 10 using ehci-pci

04.07.2018 23:45:13 usb 1-1.3 New USB device found, idVendor=1f4d, idProduct=3000

04.07.2018 23:45:13 usb 1-1.3 New USB device strings: Mfr=1, Product=2, SerialNumber=3

04.07.2018 23:45:13 usb 1-1.3 Product: USB Stick

04.07.2018 23:45:13 usb 1-1.3 Manufacturer: Max

04.07.2018 23:45:13 usb 1-1.3 SerialNumber: 080116

04.07.2018 23:45:13 dw2102 su3000_identify_state

04.07.2018 23:45:13 dvb-usb found a 'SU3000HD DVB-S USB2.0' in warm state.

04.07.2018 23:45:13 dw2102 su3000_power_ctrl: 1, initialized 0

04.07.2018 23:45:13 dvb-usb will pass the complete MPEG2 transport stream to the software demuxer.

04.07.2018 23:45:13 dvbdev DVB: registering new adapter (SU3000HD DVB-S USB2.0)

04.07.2018 23:45:13 usb 1-1.3 media controller created

04.07.2018 23:45:13 dvb-usb MAC address: 00:af:78:66:33:0d

04.07.2018 23:45:13 dvbdev dvb_create_media_entity: media entity 'dvb-demux' registered.

04.07.2018 23:45:13 ds3k_attach

04.07.2018 23:45:13 ds3k_readreg read reg 0x00, value 0xe0

04.07.2018 23:45:13 ds3k_readreg read reg 0x01, value 0xc0

04.07.2018 23:45:13 ds3k_readreg read reg 0x02, value 0x00

04.07.2018 23:45:13 DS3000 chip version 0.192 attached.

04.07.2018 23:45:13 ds3k_readreg read reg 0x01, value 0xc0

04.07.2018 23:45:13 ds3k_readreg read reg 0x02, value 0x00

04.07.2018 23:45:13 ds3k_readreg read reg 0xb2, value 0x01

04.07.2018 23:45:13 Chip ID = [DS300X]!

04.07.2018 23:45:13 usb 1-1.3 DVB: registering adapter 11 frontend 0 (Montage Technology DS3000/TS2020)...

04.07.2018 23:45:13 dvbdev dvb_create_media_entity: media entity 'Montage Technology DS3000/TS2020' registered.

04.07.2018 23:45:13 Registered IR keymap rc-su3000

04.07.2018 23:45:13 rc rc0 SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0

04.07.2018 23:45:13 input SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0/input12

04.07.2018 23:45:13 rc rc0 lirc_dev: driver dw2102 registered at minor = 0, scancode receiver, no transmitter

04.07.2018 23:45:13 dvb-usb schedule remote query interval to 150 msecs.

04.07.2018 23:45:13 dw2102 su3000_power_ctrl: 0, initialized 1

04.07.2018 23:45:13 dvb-usb SU3000HD DVB-S USB2.0 successfully initialized and connected.

Meiden · July 5, 2018 at 5:41 PM

Quote from crazycat

in my repo this geniatech specific ds3000 driver present as ds3k (also present original V4L DVB ds3000 frontend driver).

i change dw2102 driver for using ds3k for su3000 devices and this work with my old HDStar with TS2020/DS3000. Kernel 4.4 (Kubuntu 14.04.05)

And i not see any new ds3103 revision support in this driver. So this geniatech media_build just updated to latest kernels/distros since first from end 2014.

Display Spoiler

04.07.2018 23:45:13 usb 1-1.3 new high-speed USB device number 10 using ehci-pci

04.07.2018 23:45:13 usb 1-1.3 New USB device found, idVendor=1f4d, idProduct=3000

04.07.2018 23:45:13 usb 1-1.3 New USB device strings: Mfr=1, Product=2, SerialNumber=3

04.07.2018 23:45:13 usb 1-1.3 Product: USB Stick

04.07.2018 23:45:13 usb 1-1.3 Manufacturer: Max

04.07.2018 23:45:13 usb 1-1.3 SerialNumber: 080116

04.07.2018 23:45:13 dw2102 su3000_identify_state

04.07.2018 23:45:13 dvb-usb found a 'SU3000HD DVB-S USB2.0' in warm state.

04.07.2018 23:45:13 dw2102 su3000_power_ctrl: 1, initialized 0

04.07.2018 23:45:13 dvb-usb will pass the complete MPEG2 transport stream to the software demuxer.

04.07.2018 23:45:13 dvbdev DVB: registering new adapter (SU3000HD DVB-S USB2.0)

04.07.2018 23:45:13 usb 1-1.3 media controller created

04.07.2018 23:45:13 dvb-usb MAC address: 00:af:78:66:33:0d

04.07.2018 23:45:13 dvbdev dvb_create_media_entity: media entity 'dvb-demux' registered.

04.07.2018 23:45:13 ds3k_attach

04.07.2018 23:45:13 ds3k_readreg read reg 0x00, value 0xe0

04.07.2018 23:45:13 ds3k_readreg read reg 0x01, value 0xc0

04.07.2018 23:45:13 ds3k_readreg read reg 0x02, value 0x00

04.07.2018 23:45:13 DS3000 chip version 0.192 attached.

04.07.2018 23:45:13 ds3k_readreg read reg 0x01, value 0xc0

04.07.2018 23:45:13 ds3k_readreg read reg 0x02, value 0x00

04.07.2018 23:45:13 ds3k_readreg read reg 0xb2, value 0x01

04.07.2018 23:45:13 Chip ID = [DS300X]!

04.07.2018 23:45:13 usb 1-1.3 DVB: registering adapter 11 frontend 0 (Montage Technology DS3000/TS2020)...

04.07.2018 23:45:13 dvbdev dvb_create_media_entity: media entity 'Montage Technology DS3000/TS2020' registered.

04.07.2018 23:45:13 Registered IR keymap rc-su3000

04.07.2018 23:45:13 rc rc0 SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0

04.07.2018 23:45:13 input SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0/input12

04.07.2018 23:45:13 rc rc0 lirc_dev: driver dw2102 registered at minor = 0, scancode receiver, no transmitter

04.07.2018 23:45:13 dvb-usb schedule remote query interval to 150 msecs.

04.07.2018 23:45:13 dw2102 su3000_power_ctrl: 0, initialized 1

04.07.2018 23:45:13 dvb-usb SU3000HD DVB-S USB2.0 successfully initialized and connected.

Display More

Sorry, english isn't my native tongue, and I don't know if I'm understanding you. Do you mean that you had to change dw2102 driver in order to get your old HDStar working on Ubuntu? Is that possible with this new revision?

PS: it's a shame because I updated to 4.13 kernel because it was needed to build the driver. I dind't save any log of the building process in 4.4 and idk how to boot in 4.4 again from ssh.

Meiden · July 18, 2018 at 3:12 PM

CvH crazycat last message from my supplier (literally):

Code

hi friend,

   please you send email to our engineer [email protected].
   Our engineer will help you.

thanks

**CvH** · July 18, 2018 at 5:34 PM Official Post

I try a mail, we already try around at geniatech to get some sample but due there company structure it is rather difficult to get something.

Even worse none of us has any hardware to test. Maybe I get some kind of helpful reply.

coldstorage · July 26, 2018 at 3:23 PM

Sounds like same issue here with a brand new Mygica HDStar DVB-S2 USB. Not appearing in TVheadend tuner list under both LibreElec 8.2.5 official and Ubuntu server 18.04 with kernel 4.16. Relevant section of dmesg from Ubuntu below:

Code

[    6.377164] rc_core: IR Remote Control driver registered, major 241
[    6.409476] dw2102: su3000_identify_state
[    6.409477] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
[    6.409481] dw2102: su3000_power_ctrl: 1, initialized 0
[    6.415812] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    6.417118] dvbdev: DVB: registering new adapter (SU3000HD DVB-S USB2.0)
[    6.430334] dvb-usb: MAC address: 00:af:78:66:2e:e3
[    6.441954] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 10737418240 ms ovfl timer
[    6.441955] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules
[    6.441956] RAPL PMU: hw unit of domain package 2^-0 Joules
[    6.441957] RAPL PMU: hw unit of domain dram 2^-16 Joules
[    6.449846] EDAC sbridge: Seeking for: PCI ID 8086:2fa0
[    6.449851] EDAC sbridge:  Ver: 1.1.2
[    6.518088] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in warm state.
[    6.518185] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    6.519651] dvbdev: DVB: registering new adapter (Microsoft Xbox One Digital TV Tuner)
[    6.742436] mn88472 1-0018: Panasonic MN88472 successfully identified
[    6.762593] tda18250 1-0060: NXP TDA18250BHN/M successfully identified
[    6.769791] Invalid probe, probably not a DS3000
[    6.771175] dvb-usb: no frontend was attached by 'SU3000HD DVB-S USB2.0'
[    6.777638] usb 1-1: DVB: registering adapter 1 frontend 0 (Panasonic MN88472)...
[    6.777701] dvb-usb: Microsoft Xbox One Digital TV Tuner successfully initialized and connected.
[    6.781334] usbcore: registered new interface driver dvb_usb_dib0700
[    6.816055] Registered IR keymap rc-su3000
[    6.816136] rc rc0: SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:07.7/usb1/1-2/rc/rc0
[    6.816189] input: SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:07.7/usb1/1-2/rc/rc0/input5
[    6.816340] rc rc0: lirc_dev: driver dw2102 registered at minor = 0
[    6.816342] dvb-usb: schedule remote query interval to 150 msecs.
[    6.816345] dw2102: su3000_power_ctrl: 0, initialized 1
[    6.816345] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[    6.816382] usbcore: registered new interface driver dw2102
[    7.330403] audit: type=1400 audit(1532605277.527:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=774 comm="apparmor_parser"
[    7.331836] audit: type=1400 audit(1532605277.527:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=773 comm="apparmor_parser"
[    7.331840] audit: type=1400 audit(1532605277.527:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=773 comm="apparmor_parser"
[    7.338433] audit: type=1400 audit(1532605277.535:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=771 comm="apparmor_parser"
[    7.338436] audit: type=1400 audit(1532605277.535:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=771 comm="apparmor_parser"
[    7.338438] audit: type=1400 audit(1532605277.535:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=771 comm="apparmor_parser"
[    7.338441] audit: type=1400 audit(1532605277.535:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=771 comm="apparmor_parser"
[    7.339113] audit: type=1400 audit(1532605277.535:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=781 comm="apparmor_parser"
[    7.339117] audit: type=1400 audit(1532605277.535:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=781 comm="apparmor_parser"
[    7.341974] audit: type=1400 audit(1532605277.539:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=780 comm="apparmor_parser"
[    8.330095] new mount options do not match the existing superblock, will be ignored
[    8.995793] mn88472 1-0018: downloading firmware from file 'dvb-demod-mn88472-02.fw'
[    8.996301] dvb-usb: recv bulk message failed: -110
[    8.996978] dw2102: i2c transfer failed.
[    9.277248] usb 1-1: DVB: adapter 1 frontend 0 frequency 0 out of range (42000000..870000000)
[    9.588311] random: crng init done
[  367.249949] perf: interrupt took too long (2610 > 2500), lowering kernel.perf_event_max_sample_rate to 76500

Display More

and lsusb -v:

Code

Bus 001 Device 004: ID 0627:0001 Adomax Technology Co., Ltd
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0627 Adomax Technology Co., Ltd
  idProduct          0x0001
  bcdDevice            0.00
  iManufacturer           1 QEMU
  iProduct                3 QEMU USB Tablet
  iSerial                 5 42
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          7 HID Tablet
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 H#man Interface Device #LE forum does not allow word h#man
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               0.01
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      74
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               4
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               1.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Bus 001 Device 003: ID 1f4d:3000 G-Tek Electronics Group
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x1f4d G-Tek Electronics Group
  idProduct          0x3000
  bcdDevice            0.00
  iManufacturer           1 Max
  iProduct                2 USB Stick
  iSerial                 3 080116
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          219
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 Def
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x13f2  3x 1010 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       2
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x12d6  3x 726 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       3
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x12ae  3x 686 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       4
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ca  1x 970 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       5
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x02ac  1x 684 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       6
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      1
      bInterfaceProtocol      1
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ac  1x 940 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Display More

And in /dev/dvb:

Code

~$ ls /dev/dvb/adapter0
demux0  dvr0  net0 #mygica dvbs2
~$ ls /dev/dvb/adapter1
demux0  dvr0  frontend0  net0 #Xbox One tuner

Have tried with dvb-fe-ds3000.fw in /lib/firmware. Are we waiting for new drivers or firmware for these devices then? Is there a good thread to follow for progress on this issue? Let me know if there's more info anyone needs as I'm not a linux expert myself. Also want to thank everyone here for lots of help over the past 2 years!

**CvH** · July 26, 2018 at 5:47 PM Official Post

I mailed geniatech, got an reply with exactly the same driver (not a single word to the attached dmesg etc) and after a writing back that this driver is not working I got no reply. Idk if trsqr got finally his test sample to write some driver. At the moment it looks like that the vendors don't give a fu

asaber · August 15, 2018 at 7:09 PM

Hello, is there anything new?

**CvH** · August 15, 2018 at 7:49 PM Official Post

nope - at least nothing that came to my attention

geniatech was not even able to give any feedback besides some boilerplate

other vendors don't react at all (even after they promised to send a sample)

**crazycat** · August 16, 2018 at 11:31 PM

i not sure about new ds3103 version