Test LibreELEC images with KODI-19 for S9xxx

  • Last image for S905X2 from 24.9.2019

    Box:Bqueel y5


    Boot works

    Assistant works, Wi-Fi and LAN works.

    Cec is not working

    If you need more Tests, tell me!

  • i tried last weekend with T95X2 but wifi not working. connect to network but no internet

  • New image 20190927 KODI-19. Added several addons.

    Great, i will test it tomorrow.



    That sounds good. Again to the S905X2, wlan no connection to the Internet. He finds the ssid, connection is established. There are problems with the lan to enable again if you have disabled lan and want to re-enable crash 3x


    there are no names in the blutooth folder.

    Edited once, last by Pampat2014 ().

  • New image 20190927 KODI-19. Added several addons.

    Odroid N2 4GB:

    CEC not work

    addons are installable



    1 skin problem affects both s905x2 and 922 systems.

    skin aeon nox silvo as an example.

    in the selection menu is an area showing the current running program "system has video". this area only flickers.

  • I gave up on the X96 Max, and have LibreELEC now perfectly working on a Intel NUC, with everything working, IR too with a XBox360 remote, with wake up feature working also.:thumbup::thumbup::thumbup::thumbup:8)

    --

    Thankyou, Bedankt,


    Eric-Jan.

    8)

  • Thanks. Unfortunately, I'm quite busy these two days. Will test when I get the chance and show you the UART console output.

    Hi balbes150 ,


    I was about to try the two u-boot bin files you asked me to download when I notice you had them removed. Sorry I was busy with other things so I haven't had the time to try.


    On the other hand, I'm pretty sure that the file u-boot.bin.sd.bin works instead of the other one (u-boot.bin). I once compiled LE from master branch and manually wrote this file to the SD card for it to boot. Also, I would note that in projects/Amlogic/bootloader/mkimage, you have this:

    Code
    1. dd if="$INSTALL/usr/share/bootloader/u-boot.bin.sd.bin" of="$DISK" conv=fsync,notrunc bs=1 count=444 >"$SAVE_ERROR" 2>&1 || show_error
    2. dd if="$INSTALL/usr/share/bootloader/u-boot.bin.sd.bin" of="$DISK" conv=fsync,notrunc bs=512 skip=1 seek=1 >"$SAVE_ERROR" 2>&1 || show_error

    For NanoPi K2, the first dd is unnecessary. You only need this:

    Code
    1. dd if="$INSTALL/usr/share/bootloader/u-boot.bin.sd.bin" of="$DISK" conv=fsync,notrunc bs=512 seek=1 >"$SAVE_ERROR" 2>&1 || show_error

    This should be enough to get the device booting into LE.


    I'd be happy to test the images you release for the NanoPi K2 as long as I have time. On the other hand, because of the other still-unresolved issue I have with playing widevine content, I cannot use these versions of LE with mainline 5.3 kernel on a daily basis, so my tests may not be thorough. Right now, I have compiled an older version of LE 9.0.2 running on outdated 3.14 kernel and everything works well enough for me (including widevine content). I'll post that in another thread shortly.


    Thanks :)

  • hi balbes150

    LibreELEC-AMLG12.arm-9.80-devel-20190924130320-60568a1-s905x2.img.gz

    and the latest Kodi 19 image for s905x2 have ethernet problems. The wrong ip with dhcp, and manual will not work too.

    no addons can be installed so.

  • hi balbes150

    LibreELEC-AMLG12.arm-9.80-devel-20190924130320-60568a1-s905x2.img.gz

    and the latest Kodi 19 image for s905x2 have ethernet problems. The wrong ip with dhcp, and manual will not work too.

    no addons can be installed so.

    after 4 times reinstall ethernet works fine!

  • I was about to try the two u-boot bin files you asked me to download when I notice you had them removed. Sorry I was busy with other things so I haven't had the time to try.

    Try the latest version image 20191008. Preferably with UART output.

  • I have panic kernel on the boot screen!

    After installing crazycat driver.

    Radio channels work!

    LIVE TV channels don't work!

    TBS5520SE and recognized on Tvheadend do the channel search to perfection.

    I tried 3 previous versions same problems.

    Thanks. balbes150


    dmesg.txt


    It is useless knowledge if not shared the world.

  • Any help you need, feel free here to ask!

    We are here to support you in everything without exception!

    It is a great joy and respect to know that you are working on it.

    Let us help you in some way; If not now it will be after solved for sure. CvH

    Thanks, balbes150

    It is useless knowledge if not shared the world.