@balbes150 LE images with Kodi-19 for S9xxx

hi Balbes

Thx for the img. Installation went fine.

LibreELEC-Khadas_VIM.aarch64-9.1-devel-20181009135135-f0f4c63.img

I am facing the same problem as e123enitan. Whenever i want to install a Libreelec Addon the system is not able to connect. I can see the traffic on my FW and I think it tries to communicate to the correct destination. Could it be possible that the latest User Agent from the Libreelec Version ist not known by the addon repository?

Thx a lot

Regards,

Dom

Hello.

I've installed your LE in emmc along Android and it's working fine.

The only problem I have is that "reboot from Android" menu is ok in estuary skin but not with other skins.

Which file should I edit in other skins to have this menu?

Quote from mm_half3

Installed v20180717 on a usb stick and used it on my tanix S912 device. After realizing the reason the keyboard was not working was because I did not delete the stock dtb.img file from the new test img, made it through the initial setup just fine.

Since I requested it, first thing tested was reading uhd ISO files, and this version is able to open them now, thanks Oleg . Had done some research on the problem and am in the process of setting up a development system to use to try and get a test build from your amLogic_S905-kernel, libreElec & xbmc repos on github (used to build my own development/custom openelec images for pi's & xbmc binaries for macOSX a few years back...but those development environments are long gone ). Thought the problem could be an older version of libbluray was used, and libbluray-1.0.2 was not in your xbmc source, but the kodi log file showed libbluray-1.0.2 was being used, or that j2me was not enabled, so was going to try and pass the --with-bdj-type=j2me config option in the libbluray-1.0.2 src compile and see if that helped..curious if that was the problem with reading uhd ISO's, or if it was something else.

Am having some audio issues with the UHD's, still trying to figure out an optimal setting. HDMI passthrough does not work very well for any Atmos tracks, but the default analog passthrough setting did work on the Saving Private Ryan UHD mkv file tested. The Oblivion UHD ISO was still having audio/video stuttering, and buffering issues, but was better using analog audio passthrough instead of HDMI. Now that there is an amLogic leia version that opens UHD ISO's available, will create some more ISOs and try more extensive testing of them. Will also begin testing the leia builds on my Minix U91 S912 device.

Also, I have my amLogic stable 8.2.4 version setup to only boot from its external device (sd card), with the data residing on a partition of the internal storage. Maybe setting up the leia test builds to do the same might help with the video/audio/buffering issues. Need to verify, but my guess is that if I do that it will wipe/overwrite the data from the stable 8.24 build on the internal storage, since they're both going to use the same data partition.

Oleg, your time & work on development for the amLogic devices is appreciated.

Thanks,

John

Display More

HI，my box is minix U9H

How can I boot and install with SD card???

Keep pressing the power button?

but I unsuccessful.

Thank you

My box is minix U9H

How to install with SD card?

Same as LE8.2.4?

Thank you

OK

I installed successful,but the IR remote controller failure.

gxm_q200_2g.dtb and gxm_q200_2g_minix_neo_u9.dtb are tried.

Detalhes

Quote from balbes150

@chwitt You yourself asked to disable the amlgx repository in m'y test images (4.18). Or can I enable it now ?

@chwitt mentioned that if necessary, I can use a share to host images or Addons. I plan to soon master the build of Addons for aarch64 (if I can't get kicked out of the community LE)

Here still waiting for some test image for S905 processor with 4.18 kernel

Are there plans for the same?

balbes150

Thank you if you can respond!

Do you have choppy playbacks adjusting audio offset to ahead of more than 150ms?

Hello, I have installed the LibreELEC-KVIM.arm-8.90.006.img.gz version in mscool ms8 pro. The keyboard works but the remote control and the wifi do not.

The version that used to work for me was this LibreELEC-S905.arm-8.2-8.2.3.1.img.gz

Quote from balbes150

Ok

... and the version of the image LE we need to guess ...

The 4.18 kernel version is available for testing and details are available in this thread earlier, or you can find more details on the Khadas forum.

LibreELEC-S912.arm-9.0-devel-20180920164743-905fd26.img.gz

U9H

IR remote controller failure.

gxm_q200_2g.dtb and gxm_q200_2g_minix_neo_u9.dtb are tried.

HI Balbes, I just used your new build 10/08 on Tronsmart Meta s95, I used the Wetek dtb.img. repacked to SD card, but it won't boot, screen is just black, this never happen before, is there any changes I need to make to any file inside build to boot.

This version LibreELEC-S905.aarch64-9.0-devel-20180920172249-905fd26.img works without issue, so what do I need to change in the current version to make it work

Quote from doemer

hi Balbes

Thx for the img. Installation went fine.

LibreELEC-Khadas_VIM.aarch64-9.1-devel-20181009135135-f0f4c63.img

I am facing the same problem as e123enitan. Whenever i want to install a Libreelec Addon the system is not able to connect. I can see the traffic on my FW and I think it tries to communicate to the correct destination. Could it be possible that the latest User Agent from the Libreelec Version ist not known by the addon repository?

Thx a lot

Regards,

Dom

Display More

HI Doemer, Have been able to resolve this issue and how? Please share your steps, I 'm still in a struggle to test my Live Tv and other several addons with connection to repo.

I hope Balbes will have a fix on a going forward as it essential for testing the stability and functionalities of the build.

Cheers!

Hi,

in HDMI passthrough mode, i have no sound for video with 2.0 channels.

I have missed something ?

(For information the same file works fine with LE 8.2.5 on rapsberry 1)

LibreELEC-LePotato.arm-8.90.006.img.gz (info)

Quote from chewitt

I don't remember that, but then I don't remember lots of things. I keep the arm repo up to date so no harm in using it. If you want to keep building aarch64 it's best to create another repo though. I can setup some webspace if you need it - ping me in Slack.

Is there way to side load the repos such as URL, or I my thinking wrong, I have find it difficult to test Kodi 18 with out access to repo PVR's such as DVBViewer and Stalker.