That´s it.
WIN 10 share connection isn´t working(most cases) if You try to play 4k videos - I can confirm it´s not working
You have to attach local HDD/SSD or an NAS using NFS protocol - I can confirm it works
not only some samples
Am I missing somthing her??? I have no problem playing 4k from windows sharer. I can even play the jellyfish demo at 140mbps 4k 10bit hdr.
Or move to an NAS system - cheap & easy to use
I have a 20TB storagespace setup on my dedicated windows 10 pro machine, so moving to freeNAS or Xpenology is not easy, beside I have a virtual instance of Xpenology, but sadly its not capable to reshare remote folder (windows share) via NFS.
Am I missing somthing her??? I have no problem playing 4k from windows sharer. I can even play the jellyfish demo at 140mbps 4k 10bit hdr.
I guess you have a 1 Gbit interface on your box otherwise the jelly demo wont be smooth on a 100 Mbit interface
I guess you have a 1 Gbit interface on your box otherwise the jelly demo wont be smooth on a 100 Mbit interface
Well, Yes... The MeCool has an internal Gbit, and on my NEXBOX i've got a cheep usb Gbit... So what i missed is that you want to play UHD with Mbit.... Well good luck with that:)
made some iperf3 test and it's seem that incoming connections are much more slower than the other way around.
and I've noticed the same when tested FTP using FileZilla Server when the speed was 3-4 MB/s which is ~24-32Mbit/s
LibreELEC:~/media/ # iperf3 -c 10.0.1.9
Connecting to host 10.0.1.9, port 5201
[ 4] local 10.0.1.19 port 52214 connected to 10.0.1.9 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 12.7 MBytes 106 Mbits/sec 0 252 KBytes
[ 4] 1.00-2.00 sec 11.1 MBytes 92.8 Mbits/sec 0 269 KBytes
[ 4] 2.00-3.00 sec 11.6 MBytes 97.3 Mbits/sec 0 271 KBytes
[ 4] 3.00-4.00 sec 11.1 MBytes 93.4 Mbits/sec 0 271 KBytes
[ 4] 4.00-5.00 sec 11.1 MBytes 93.3 Mbits/sec 0 271 KBytes
[ 4] 5.00-6.00 sec 11.7 MBytes 98.1 Mbits/sec 0 271 KBytes
[ 4] 6.00-7.00 sec 11.1 MBytes 93.1 Mbits/sec 0 271 KBytes
[ 4] 7.00-8.00 sec 11.2 MBytes 93.7 Mbits/sec 0 271 KBytes
[ 4] 8.00-9.00 sec 11.3 MBytes 94.8 Mbits/sec 0 271 KBytes
[ 4] 9.00-10.00 sec 11.3 MBytes 95.1 Mbits/sec 0 271 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 114 MBytes 95.8 Mbits/sec 0 sender
[ 4] 0.00-10.00 sec 113 MBytes 95.0 Mbits/sec receiver
iperf Done.
LibreELEC:~/media/ # iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 10.0.1.9, port 54481
[ 5] local 10.0.1.19 port 5201 connected to 10.0.1.9 port 54482
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-1.00 sec 610 KBytes 4.99 Mbits/sec
[ 5] 1.00-2.00 sec 4.33 MBytes 36.4 Mbits/sec
[ 5] 2.00-3.00 sec 2.96 MBytes 24.9 Mbits/sec
[ 5] 3.00-4.00 sec 2.94 MBytes 24.7 Mbits/sec
[ 5] 4.00-5.00 sec 4.06 MBytes 34.0 Mbits/sec
[ 5] 5.00-6.00 sec 4.19 MBytes 35.1 Mbits/sec
[ 5] 6.00-7.00 sec 3.01 MBytes 25.3 Mbits/sec
[ 5] 7.00-8.00 sec 3.00 MBytes 25.2 Mbits/sec
[ 5] 8.00-9.00 sec 4.18 MBytes 35.1 Mbits/sec
[ 5] 9.00-10.00 sec 4.00 MBytes 33.6 Mbits/sec
[ 5] 10.00-10.00 sec 0.00 Bytes 0.00 bits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-10.00 sec 0.00 Bytes 0.00 bits/sec sender
[ 5] 0.00-10.00 sec 33.3 MBytes 27.9 Mbits/sec receiverAm I missing somthing her??? I have no problem playing 4k from windows sharer. I can even play the jellyfish demo at 140mbps 4k 10bit hdr.
Try a 90min 4k HDR video.
My experience -> NFS is better than SMB
Just connected the internal Ethernet on my NEXBOX, and as long as the bitrate doesn't stay above 40mbits to long, I have no problem playing 4k HDR files. (the host has Gbit net)
ps. I've also got thees settings in advancedsettings.xml
<cache>
<memorysize>82428800</memorysize>
<buffermode>1</buffermode>
<readfactor>10.5</readfactor>
</cache>and as long as the bitrate doesn't stay above 40mbits to long, I have no problem playing 4k HDR files. (the host has Gbit net)
My movie bitrate ~65mbits
SMB host has Gbit net
NFS host(NAS) has bonded dual Gbit net
My conclusion:
Network protocol is very important if You want to play high bitrate video
My movie bitrate ~65mbits
SMB host has Gbit net
NFS host(NAS) has bonded dual Gbit net
My conclusion:
Network protocol is very important if You want to play high bitrate video
I agree, SMB sucks!! 
Yes
SMB suckz
AFP also bad
NFS rulez
It's (smb) like an old diesel, it works, but you'l always be driving in the slow lane;)
We can agree that SMB is not the best contender, but as you can see the speed using FTP is similar and the iperf3 test also show that limit around 30 Mbit. Regarding that any suggestion ?
made some iperf3 test and it's seem that incoming connections are much more slower than the other way around.
and I've noticed the same when tested FTP using FileZilla Server when the speed was 3-4 MB/s which is ~24-32Mbit/s
CodeLibreELEC:~/media/ # iperf3 -c 10.0.1.9 Connecting to host 10.0.1.9, port 5201 [ 4] local 10.0.1.19 port 52214 connected to 10.0.1.9 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 12.7 MBytes 106 Mbits/sec 0 252 KBytes [ 4] 1.00-2.00 sec 11.1 MBytes 92.8 Mbits/sec 0 269 KBytes [ 4] 2.00-3.00 sec 11.6 MBytes 97.3 Mbits/sec 0 271 KBytes [ 4] 3.00-4.00 sec 11.1 MBytes 93.4 Mbits/sec 0 271 KBytes [ 4] 4.00-5.00 sec 11.1 MBytes 93.3 Mbits/sec 0 271 KBytes [ 4] 5.00-6.00 sec 11.7 MBytes 98.1 Mbits/sec 0 271 KBytes [ 4] 6.00-7.00 sec 11.1 MBytes 93.1 Mbits/sec 0 271 KBytes [ 4] 7.00-8.00 sec 11.2 MBytes 93.7 Mbits/sec 0 271 KBytes [ 4] 8.00-9.00 sec 11.3 MBytes 94.8 Mbits/sec 0 271 KBytes [ 4] 9.00-10.00 sec 11.3 MBytes 95.1 Mbits/sec 0 271 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 114 MBytes 95.8 Mbits/sec 0 sender [ 4] 0.00-10.00 sec 113 MBytes 95.0 Mbits/sec receiver iperf Done. LibreELEC:~/media/ # iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 10.0.1.9, port 54481 [ 5] local 10.0.1.19 port 5201 connected to 10.0.1.9 port 54482 [ ID] Interval Transfer Bandwidth [ 5] 0.00-1.00 sec 610 KBytes 4.99 Mbits/sec [ 5] 1.00-2.00 sec 4.33 MBytes 36.4 Mbits/sec [ 5] 2.00-3.00 sec 2.96 MBytes 24.9 Mbits/sec [ 5] 3.00-4.00 sec 2.94 MBytes 24.7 Mbits/sec [ 5] 4.00-5.00 sec 4.06 MBytes 34.0 Mbits/sec [ 5] 5.00-6.00 sec 4.19 MBytes 35.1 Mbits/sec [ 5] 6.00-7.00 sec 3.01 MBytes 25.3 Mbits/sec [ 5] 7.00-8.00 sec 3.00 MBytes 25.2 Mbits/sec [ 5] 8.00-9.00 sec 4.18 MBytes 35.1 Mbits/sec [ 5] 9.00-10.00 sec 4.00 MBytes 33.6 Mbits/sec [ 5] 10.00-10.00 sec 0.00 Bytes 0.00 bits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 5] 0.00-10.00 sec 0.00 Bytes 0.00 bits/sec sender [ 5] 0.00-10.00 sec 33.3 MBytes 27.9 Mbits/sec receiver
905X using USB Gbit adapter -> PC WIN10pro
iperf -c 192.x.x.x -u -p 12345 -t 30 -b 250M
22.1 MBytes 185 Mbits/sec
Regarding that any suggestion ?
Are You sure using Gbit network ?
905X using USB Gbit adapter -> PC WIN10pro
iperf -c 192.x.x.x -u -p 12345 -t 30 -b 250M
22.1 MBytes 185 Mbits/sec
Are You sure using Gbit network ?
I never mentioned that I using Gbit connection my box (Mecool M8S Pro+) only has a 100 Mbit interface, but that should be enough for all regular 4K content.
My main concern why I got only around 30 Mbit speed ?
100 Mbit interface, but that should be enough for all regular 4K content.
My main concern why I got only around 30 Mbit speed ?
100Mbit is not enough for some 4k videos - we had a long thread about this in the forum
I don´t know why Your network speed is to slow - Know nothing about Your network hardware
I never mentioned that I using Gbit connection
My main concern why I got only around 30 Mbit speed ?
If you do a windows file copy of a big file from the windows pc to your box, at what speed dose windows copy the file?
If you do a windows file copy of a big file from the windows pc to your box, at what speed dose windows copy the file?
It's around 4 MB/s
edit: if i do the other way (copy file from the box to windows) its about 11+ MB/s
Hi, tried latest version. tvheadend not working, not possible to update.
I then wanted to revert to kzaq's or previous version, but I then get an error
failed to mount /dev/loop0 on /storage/.update/.tmp/mnt invalid argument
is there a way out of this without wiping the sdcard clean ?
Thanks a lot
same issue here, i placed the 1.08 build in update folder and restarted the 1.09 build
