Xbox One Controller - Bluetooth

Kodistan · September 15, 2017 at 7:13 PM

Hey,

My english is not the best but i am trying.

I have a problem with LibreElec (testet on 8.0.2 and 8.1.1) with Kodi 17.4 on a Raspberry Pi 3.

I want to connect a Xbox One Controller via Bluetooth (The Controller support this connection, connection with windows 10 no problem).

But it comes an Error "Input/Output Error".

I have tried it with the bluetooth on the raspberry pi and with a bluetooth usb dongle.

Can somebody help me ?

If this topic is not right here, please move it in the right topic.

Thank you for reading

**lrusak** · September 15, 2017 at 8:09 PM Official Post

IIRC the xbox one bluetooth controller requires extra config via SSH.

Code

echo 1 > /sys/module/bluetooth/parameters/disable_ertm

then try pairing

Kodistan · September 16, 2017 at 9:20 AM

Quote from lrusak
IIRC the xbox one bluetooth controller requires extra config via SSH.
Code
echo 1 > /sys/module/bluetooth/parameters/disable_ertm
then try pairing

I have try it, bit the problem is not solved

Same Error

**Saxnot** · December 8, 2017 at 10:01 PM

Quote from lrusak
IIRC the xbox one bluetooth controller requires extra config via SSH.
Code
echo 1 > /sys/module/bluetooth/parameters/disable_ertm
then try pairing

Hi Irusak,

thank you for this command. I also use the xbox one controller (Rev. 3). With your command I get the controller connected via bluetooth. But after a restart those "input/output errors" come again. Is there a way to get it working durable?

**Saxnot** · December 17, 2017 at 2:40 PM

I created a autostart.sh with this code:

Code

(
 echo 1 > /sys/module/bluetooth/parameters/disable_ertm
) &
nohup script.sh &

Now the controller is connecting automatically. But it takes 30 seconds after Kodi-Start. Any ideas to do it in a better way?

Cris_ · August 21, 2018 at 10:26 AM

Hi,

where/how can i disable_ertm on a RPi3/LibreElec 18? Can't edit disable_ertm file, (squashed system?)!

Trying to connect my Xbox Wireless Controller Modell 1708 per Bluetooth.

aneagoe · September 7, 2018 at 8:05 PM

Add a persistent module option like this:

Code

echo 'options bluetooth disable_ertm=1' > /storage/.config/modprobe.d/bluetooth-disable-ertm.conf

The modprobe.d files are loaded at boot time and apply module options.

Cris_ · September 10, 2018 at 10:19 AM

Thanks aneagoe!

But doesn't help for me. Gettin input/output error when i try to connect my Xbox Controller.

EDIT: Tried another BT Controller and it works now!

Edit2: Tried to config the Controller to navigate in Kodi and cant get it work. So needs more investigation now,,

update.freak · April 24, 2022 at 4:59 PM

I there an solution for the Xbox Controller modell 1914 with LibreELEC (9.2.8 or the current version) for RPi3 or RPi4?

I would like to play SNES games or GBA games with LibreELEC.

Currently still use the Gamestarter AddOn, but unfortunately with LibreELEC 10 should no longer work.

Are there alternatives?

Hellsgore · February 14, 2023 at 9:12 PM

Hi Guys,

I would like to thank the community by signing up here and describing my solution to the problem. Here is the problem I had:

- New Microsoft XBox Controller Model 1914

- Pairing failed all the time

- The connection kept switching between on and off to the controller

- The XBox icon has been flashing continuously

My system:

- LibreElec (official) 10.0.4 (kernel: Linux 5.10.161)

- New XBox controller model 1914 with latest firmware; Previously I updated the controller on a Windows PC with the XBox accessory software.

- TP Link USB Bluetooth Stick UB400

My steps to the solution:

1. Switch OFF the controller

2. Disable ERTM (type in the following line in command line)

Code

echo 'options bluetooth disable_ertm=Y' > /storage/.config/modprobe.d/bluetooth-disable-ertm.conf

2.1 After that a file "bluetooth-disable-ertm.conf" should be created in the directory and have the entry 'options bluetooth disable_ertm=Y'.

3. The problem is in the Kodi 18 switching to libinput. It handles keyboards and mice but doesn't handle joysticks so you need to tell the libinput to ignore this device by assigning the LIBINPUT_IGNORE_DEVICE flag to it. I don't know if it was solved in Kodi 19, that's why I did this step.

3.1 Create a file "99-gamepad.rules" with the following content in "/storage/.config/udev.rules.d/" (type in the following line in command line)

Code

echo -e 'SUBSYSTEM=="input", ATTRS{name}=="Xbox Wireless Controller", KERNEL=="event*", MODE="0666", ENV{LIBINPUT_IGNORE_DEVICE}="1"\nSUBSYSTEM=="input", ATTRS{name}=="Xbox Wireless Controller", KERNEL=="event*", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"' > /storage/.config/udev.rules.d/99-gamepad.rules

3.3 If your controller is not "Xbox Wireless Controller" then replace it with the controller name

3.3.1 You will see your controller name within bluetoothctl with the command "devices" after you switched the controller on.

Example:

Code

Media-PC:~ # bluetoothctl
Agent registered
[bluetooth]# devices
Device 68:XX:XX:XX:XX:E7 Xbox Wireless Controller
Device 10:XX:XX:XX:XX:56 AR
[bluetooth]#

4. Reboot the system

5. Open bluetoothctl via console: "bluetoothctl"

5.1 Check devices: Type "device" - You will get a list with all available Bluetooth devices. Search for the XBox controller.

5.2 If the XBox controller is present, delete it from the list: "remove AA:BB:CC:DD:EE:FF" (Replace the MAC address with the address of the controller)

5.3 Turn on the controller and hold the connection button on the top until the controller starts blinking faster.

5.4 Search for the controller in the console with "scan on".

5.5 Wait until you see the XBox controller on the screen.

5.6 End the search with "scan off"

5.7 Trust the controller with "trust AA:BB:CC:DD:EE:FF"

5.8 After that, try to pair the controller with "pair AA:BB:CC:DD:EE:FF". The step can take a little longer and you must not get an error in the console. Furthermore the controller should still be in pairing mode. If you get an error just start again at step 5.1.

5.9 After a while it will ask you if you want to allow the connection. Acknowledge this with "yes".

6. Now the XBox icon should light up permanently on the controller and the controller should be connected.

6.1 Now switch to the view in Kodi and press a button on the controller. A message should appear that a new controller has been found and that you can set it up now. Confirm it with "Yes". Otherwise you can also set up the controller again under System/Input/Controller.

6.2 In my case, the controller was displayed in the menu as "Kodi Standard Controller". I simply assigned the buttons and the sticks by following the menu entries.

Now the controller should be completely set up and you can use it to operate the menu. After a restart, the controller should connect again as soon as you turn it on. If this does not work, check step 2 again.

If there are any suggestions for improvement or if I am talking complete nonsense or if you have any questions, please let me know.

Thanks

Hellsgore

EDIT: Thx to 1postNghost for the suggestion. I have revised point 3.

1postNghost · February 17, 2023 at 9:32 PM

Quote from Hellsgore
Hi Guys,
I would like to thank the community by signing up here and describing my solution to the problem. Here is the problem I had:
- New Microsoft XBox Controller Model 1914
- Pairing failed all the time
- The connection kept switching between on and off to the controller
- The XBox icon has been flashing continuously
My system:
- LibreElec (official) 10.0.4 (kernel: Linux 5.10.161)
- New XBox controller model 1914 with latest firmware; Previously I updated the controller on a Windows PC with the XBox accessory software.
- TP Link USB Bluetooth Stick UB400
My steps to the solution:
1. Switch OFF the controller
2. Disable ERTM
Code
echo 'options bluetooth disable_ertm=Y' > /storage/.config/modprobe.d/bluetooth-disable-ertm.conf
2.1 After that a file "bluetooth-disable-ertm.conf" should be created in the directory and have the entry 'options bluetooth disable_ertm=Y'.
3. The problem is in the Kodi 18 switching to libinput. It handles keyboards and mice but doesn't handle joysticks so you need to tell the libinput to ignore this device by assigning the LIBINPUT_IGNORE_DEVICE flag to it. I don't know if it was solved in Kodi 19, that's why I did this step.
3.1 Create a file "99-gamepad.rules" in "/storage/.config/udev.rules.d/".
3.2 Insert the following lines:
Code
SUBSYSTEM=="input", ATTRS{name}=="Xbox Wireless Controller", KERNEL=="event*", MODE="0666", ENV{LIBINPUT_IGNORE_DEVICE}="1"
SUBSYSTEM=="input", ATTRS{name}=="Xbox Wireless Controller", KERNEL=="event*", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"
3.3 If your controller is not "Xbox Wireless Controller" then replace it with the controller name you see with bluetoothctl -> devices.
4. Reboot the system
5. Open bluetoothctl via console: "bluetoothctl"
5.1 Check devices: Type "device" - You will get a list with all available Bluetooth devices. Search for the XBox controller.
5.2 If the XBox controller is present, delete it from the list: "remove AA:BB:CC:DD:EE:FF" (Replace the MAC address with the address of the controller)
5.3 Turn on the controller and hold the connection button on the top until the controller starts blinking faster.
5.4 Search for the controller in the console with "scan on".
5.5 Wait until you see the XBox controller on the screen.
5.6 End the search with "scan off
5.7 Trust the controller with "trust AA:BB:CC:DD:EE:FF"
5.8 After that, try to pair the controller with "pair AA:BB:CC:DD:EE:FF". The step can take a little longer and you must not get an error in the console. Furthermore the controller should still be in pairing mode. If you get an error just start again at step 5.1.
5.9 After a while it will ask you if you want to allow the connection. Acknowledge this with "yes".
6. now the XBox icon should light up permanently on the controller and the controller should be connected.
6.1 Now switch to the view in Kodi and press a button on the controller. A message should appear that a new controller has been found and that you can set it up now. Confirm it with "Yes". Otherwise you can also set up the controller again under System/Input/Controller.
6.2 In my case, the controller was displayed in the menu as "Kodi Standard Controller". I simply assigned the buttons and the sticks by following the menu entries.
Now the controller should be completely set up and you can use it to operate the menu. After a restart, the controller should connect again as soon as you turn it on. If this does not work, check step 2 again.
If there are any suggestions for improvement or if I am talking complete nonsense or if you have any questions, please let me know.
Thanks
Hellsgore
Display More

Followed this and had success!

I'm somewhat of a beginner to doing things in the terminal as well as ssh so i wanted to make a post to make things easier for others. In my situation I didn't know how to open a visual app to enter the multi lines of code.

so...for steps 3-3.3 i used this command. ...also keep an eye on your current directory.

I CD'd into ~~root~~ "/storage/.config/udev.rules.d/" then ran this;

Code

echo -e 'SUBSYSTEM=="input", ATTRS{name}=="Xbox Wireless Controller", KERNEL=="event*", MODE="0666", ENV{LIBINPUT_IGNORE_DEVICE}="1"\nSUBSYSTEM=="input", ATTRS{name}=="Xbox Wireless Controller", KERNEL=="event*", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"' > 99-gamepad.rules

after that follow the rest of Hellsgore's guide. I had to go through the button binding process before the controller actually worked.

Thanks Hellsgore !

LeannLL · February 22, 2023 at 5:30 AM

Quote from Hellsgore

Hi Guys,
I would like to thank the community by signing up here and describing my solution to the problem. Here is the problem I had:
- New Microsoft XBox Controller Model 1914
- Pairing failed all the time
- The connection kept switching between on and off to the controller
- The XBox icon has been flashing continuously

Display More

these are very difficult steps for a linux beginner. Will this be integrated into LibreElec later? That is, that I no longer have to do this whole difficult tutorial? Why does this have to be done?

**chewitt** · February 22, 2023 at 7:54 AM

Quote from LeannLL

Will this be integrated into LibreElec later? Why does this have to be done?

It cannot be default bundled because the "disable_ertm" property being set is global for all USB devices; and that may cause problems for other devices owned by other users in our large userbase that don't want that to be set (hypothetical but highly-probable scenario).

The correct fix would be to ammend the upstrem kernel driver to set the property. Then the patch can be upstreamed; we can temporarily patch our kernel sources and later drop the patch when we bump the kernel to a version that already includes it. This requires someone to create and then usptream the patch though. Any volunteers?

Hellsgore · February 22, 2023 at 7:11 PM

Quote from LeannLL

these are very difficult steps for a linux beginner. Will this be integrated into LibreElec later? That is, that I no longer have to do this whole difficult tutorial? Why does this have to be done?

Hi LeannLL,

I know it's hard for beginners because you need some basic knowledge. At which step do you struggle?

Greetings

roxton · March 27, 2023 at 7:11 PM

TL;DR: update your XBOX wireless controller's firmware

On LibreELEC 11.0.1, both these things are still needed to connect your XBOX wireless controller via Bluetooth and use it:

Disable ERTM, lets the controller be paired and connected (1 command, pastable):
echo 'options bluetooth disable_ertm=1' > /storage/.config/modprobe.d/bluetooth-disable-ertm.conf
Ignore libinput, makes the controller's buttons work (2 commands, pastable):
echo 'SUBSYSTEM=="input", ATTRS{name}=="Xbox Wireless Controller", KERNEL=="event*", MODE="0666", ENV{LIBINPUT_IGNORE_DEVICE}="1"' > /storage/.config/udev.rules.d/99-gamepad.rules
echo 'SUBSYSTEM=="input", ATTRS{name}=="Xbox Wireless Controller", KERNEL=="event*", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"' >> /storage/.config/udev.rules.d/99-gamepad.rules

After running the above, you would reboot and try pairing your controller. Potentially you would fail to do so with a newer XBOX Series X/S controller or succeed with an older XBOX One controller.

If pairing worked, you would usually navigate to LibreELEC's Settings > System > Input and do Configure attached controllers. During configuration you probably would not be able to map the Back and Guide buttons.

The thing that has changed for me (why I'm posting this) is that all the buttons including Back and Guide (XBOX) started working on both my controllers - the older XBOX One controller and the newer XBOX Series S/X - after I updated their firmware via the Xbox Accessories app on my Windows 11 machine (for this, controllers should be connected with a USB-cable or using XBOX Wireless Adapter). So all buttons are now functional, yay!

leokaos · September 22, 2024 at 10:56 AM

Hello all!

I installed the LibreELEC 12 and I want to use my xbox controller....I follow all these instructions and tried several times, and the controller keeps on/off until timeout

Result of the attempted to connect:

Code

[bluetooth]# devices
[bluetooth]# scan on
[bluetooth]# SetDiscoveryFilter success
[bluetooth]# hci0 type 7 discovering on
[bluetooth]# Discovery started
[bluetooth]# [CHG] Controller XX:XX:XX:XX:XX:XX Discovering: yes
[bluetooth]# [NEW] Device YY:YY:YY:YY:YY:YY Xbox Wireless Controller
[bluetooth]# [NEW] Device XX:XX:XX:XX:XX:XX [LG] webOS TV OLED65CS6LA
[bluetooth]# hci0 type 7 discovering off
[bluetooth]# trust YY:YY:YY:YY:YY:YY
[bluetooth]# [CHG] Device YY:YY:YY:YY:YY:YY Trusted: yes
[bluetooth]# Changing YY:YY:YY:YY:YY:YY trust succeeded
[bluetooth]# hci0 type 7 discovering on
[bluetooth]# hci0 type 7 discovering off
[bluetooth]# pair YY:YY:YY:YY:YY:YY
Attempting to pair with YY:YY:YY:YY:YY:YY
[bluetooth]# hci0 YY:YY:YY:YY:YY:YY type LE Public connected eir_len 14
[CHG] Device YY:YY:YY:YY:YY:YY Connected: yes
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY Bonded: yes
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY UUIDs: 00000001-5f60-4c4f-9c83-a7953298d40d
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY UUIDs: 00001800-0000-1000-8000-00805f9b34fb
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY UUIDs: 00001801-0000-1000-8000-00805f9b34fb
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY UUIDs: 0000180a-0000-1000-8000-00805f9b34fb
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY UUIDs: 0000180f-0000-1000-8000-00805f9b34fb
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY UUIDs: 00001812-0000-1000-8000-00805f9b34fb
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY ServicesResolved: yes
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY Paired: yes
[Xbox Wireless Controller]# [NEW] Primary Service (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0008
00001801-0000-1000-8000-00805f9b34fb
Generic Attribute Profile
[Xbox Wireless Controller]# [NEW] Primary Service (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0009
0000180a-0000-1000-8000-00805f9b34fb
Device Information
[Xbox Wireless Controller]# [NEW] Characteristic (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0009/char000a
00002a29-0000-1000-8000-00805f9b34fb
Manufacturer Name String
[Xbox Wireless Controller]# [NEW] Characteristic (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0009/char000c
00002a50-0000-1000-8000-00805f9b34fb
PnP ID
[Xbox Wireless Controller]# [NEW] Characteristic (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0009/char000e
00002a26-0000-1000-8000-00805f9b34fb
Firmware Revision String
[Xbox Wireless Controller]# [NEW] Characteristic (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0009/char0010
00002a25-0000-1000-8000-00805f9b34fb
Serial Number String
[Xbox Wireless Controller]# [NEW] Primary Service (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0012
0000180f-0000-1000-8000-00805f9b34fb
Battery Service
[Xbox Wireless Controller]# [NEW] Characteristic (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0012/char0013
00002a19-0000-1000-8000-00805f9b34fb
Battery Level
[Xbox Wireless Controller]# [NEW] Descriptor (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0012/char0013/desc0015
00002902-0000-1000-8000-00805f9b34fb
Client Characteristic Configuration
[Xbox Wireless Controller]# [NEW] Primary Service (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0024
00000001-5f60-4c4f-9c83-a7953298d40d
Vendor specific
[Xbox Wireless Controller]# [NEW] Characteristic (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0024/char0025
00000002-5f60-4c4f-9c83-a7953298d40d
Vendor specific
[Xbox Wireless Controller]# [NEW] Characteristic (Handle 0x0000)
/org/bluez/hci0/ddev_YY_YY_YY_YY_YY_YY/service0024/char0027
00000003-5f60-4c4f-9c83-a7953298d40d
Vendor specific
[Xbox Wireless Controller]# [NEW] Characteristic (Handle 0x0000)
/org/bluez/hci0/dev_YY_YY_YY_YY_YY_YY/service0024/char0029
00000004-5f60-4c4f-9c83-a7953298d40d
Vendor specific
[Xbox Wireless Controller]# Pairing successful
[Xbox Wireless Controller]# hci0 device_flags_changed: YY:YY:YY:YY:YY:YY (LE Public)
[Xbox Wireless Controller]# supp: 0x00000001 curr: 0x00000000
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY Modalias: usb:v045Ep0B13d0509
[Xbox Wireless Controller]# hci0 type 7 discovering on
[Xbox Wireless Controller]# [NEW] Device BB:BB:BB:BB:BB:BB Mi Smart Band 4
[Xbox Wireless Controller]# hci0 type 7 discovering off
[Xbox Wireless Controller]# hci0 type 7 discovering on
[Xbox Wireless Controller]# [DEL] Device AA:AA:AA:AA:AA:AA [LG] webOS TV OLED65CS6LA
[Xbox Wireless Controller]# [NEW] Device AA:AA:AA:AA:AA:AA [LG] webOS TV OLED65CS6LA
[Xbox Wireless Controller]# hci0 type 7 discovering off
[Xbox Wireless Controller]# hci0 type 7 discovering on
[Xbox Wireless Controller]# [DEL] Device BB:BB:BB:BB:BB:BB Mi Smart Band 4
[Xbox Wireless Controller]# [CHG] Device AA:AA:AA:AA:AA:AA UUIDs: 0000110a-0000-1000-8000-00805f9b34fb
[Xbox Wireless Controller]# [CHG] Device AA:AA:AA:AA:AA:AA UUIDs: 0000110b-0000-1000-8000-00805f9b34fb
[Xbox Wireless Controller]# [CHG] Device AA:AA:AA:AA:AA:AA UUIDs: 0000110c-0000-1000-8000-00805f9b34fb
[Xbox Wireless Controller]# [CHG] Device AA:AA:AA:AA:AA:AA UUIDs: 0000110e-0000-1000-8000-00805f9b34fb
[Xbox Wireless Controller]# [CHG] Device AA:AA:AA:AA:AA:AA UUIDs: 00001200-0000-1000-8000-00805f9b34fb
[Xbox Wireless Controller]# [CHG] Device AA:AA:AA:AA:AA:AA UUIDs: 00000000-0000-0000-0000-000000000000
[Xbox Wireless Controller]# hci0 type 7 discovering off
[Xbox Wireless Controller]# hci0 type 7 discovering on
[Xbox Wireless Controller]# hci0 YY:YY:YY:YY:YY:YY type LE Public disconnected with reason 3
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY ServicesResolved: no
[CHG] Device YY:YY:YY:YY:YY:YY Connected: noh
[bluetooth]# hci0 type 7 discovering off
[bluetooth]# hci0 YY:YY:YY:YY:YY:YY type LE Public connected eir_len 19
[CHG] Device YY:YY:YY:YY:YY:YY Connected: yes
[Xbox Wireless Controller]# [CHG] Device YY:YY:YY:YY:YY:YY ServicesResolved: yes
[Xbox Wireless Controller]# hci0 type 7 discovering on
[Xbox Wireless Controller]# [NEW] Device BB:BB:BB:BB:BB:BB Mi Smart Band 4
[Xbox Wireless Controller]# hci0 type 7 discovering off
[Xbox Wireless Controller]# hci0 type 7 discovering on

Display More

Cris_ · September 22, 2024 at 2:51 PM

In LibreElec 13 nightly for rpi5 my Xbox BT controller is successfully connected and a i can control the Kodi UI with it but not the puae addon with a game loaded. I have successfully configured the blue hog controller profile with the Xbox BT Gamepad which comes with the puae addon already. Still controlling the Kodi UI.

Any hint?

Xbox One Controller - Bluetooth

Similar Threads

RetroELEC Kodi+Wayland+Emulationstation+RetroArch (x86/XU4/RPi)

[8.0.2e] LibreELEC 8.0 for S905/S905X