MXQ Pro no wifi

I successfully installed libreelec on my MXQ Pro yesterday. Then had issues installing it on a second both so I ended up swapping the second box for a new one. The new one had no issues flashing but I have no wifi. It's the MXQ Pro 1g ram so I tried the 100m and the 100m Realtek files but neither work. Is there anything else I can try? I'm assuming this MXQ Pro has some other Chinese wifi chip inside

Please let me know what additional info is required and if any special instructions to obtain that info
Thank you

Quote from kostaman

udevadm info /sys/bus/sdio/devices/sdio*

Run above command and report output

Thanks for the reply and instructions and I will do this right away. But can you please explain the best way to do this command? Since I have no wifi I cannot SSH into the box remotely. Can I do this from kodi?

Quote from kostaman

Just use ethernet. It will still be on the same network.

of course, silly me

I did the command but see below output

LibreELEC (community) Version: 8.0.0c-temp_sensor_disabled
LibreELEC git: e5a2b4eb5166ae2eae3e071bab75d3b7f06bdce1
LibreELEC2:~ # udevadm info /sys/bus/sdio/devices/sdio*
Unknown device, --name=, --path=, or absolute path in /dev/ or /sys expected.

also just noticed none of the 4 USB ports are working with this firmware

Quote from kszaq

I have told you in the other thread that your second device is probably a S905X. Use a device tree for it and at least USB should work.

Hi ksaq
The second device that I had issues flashing I returned to the seller and got a new one. This new one flashed the same as my first box , easy as pie. And I agree even though they are box MXQ Pro boxes who knows what internal boards and chips where used. And the fact that both the wifi and USB doesn't work confirms your theory. I'll try to flash with the S905X device tree and report back
Thanks again for your hard work and support and coffee money will be on the way

Just an off topic question since I don't want to keep having issues flashing these MXQ Pro boxes. Is there a few boxes that are better to be purchasing for flashing? I know the wetek are good but really expensive compared to these.

So I used the S905X from the device tree and WiFi still doesn't work but USB works now but also now the remote doesn't work

trying to follow your "no remote FAQ"

\\your_box_IP\Configuration (there is no folder called "Configuration") Searched windows and cannot find remote.conf and SSH cannot find directory "/system"

Update: I ended up flashing and tried multiple device tree files until finally both remote and USB work, still no WiFi but I can live with that for now
[hr]

Quote from kostaman

Just use ethernet. It will still be on the same network.

using one of the device trees for s905X the command worked

LibreELEC (community) Version: 8.0.0c
LibreELEC git: e5a2b4eb5166ae2eae3e071bab75d3b7f06bdce1
LibreELEC1:~ # udevadm info /sys/bus/sdio/devices/sdio*
P: /devices/http://d0070000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
E: DEVPATH=/devices/http://d0070000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:1
E: MODALIAS=sdio:c07v02E7d9082
E: SDIO_CLASS=07
E: SDIO_ID=02E7:9082
E: SUBSYSTEM=sdio

Quote from kszaq

You have an unsupported WiFi chip, more explanation in this thread: showthread.php?tid=5457

thanks, i'll use it as wired ..works great

is there any Amlogic boxes that you recommend? since some are a mixed bag of components