IMX6 V7.95.1 sound issues.

**Iridium** · January 31, 2017 at 7:07 PM Official Post

Upgrading from 7.90.010 to 7.95.1 videos are unplayable.

kodi log shows.

18:13:52.990 T:1271911328 NOTICE: Creating audio stream (codec id: 86018, channels: 2, sample rate: 48000, no pass-through)
18:13:53.480 T:1961781200 NOTICE: Using GL_TEXTURE_2D
18:13:53.481 T:1961781200 NOTICE: GL: Using IMXMAP render method
18:13:53.481 T:1961781200 NOTICE: GL: NPOT texture support detected
18:13:53.996 T:1444934560 WARNING: CRenderManager::WaitForBuffer - timeout waiting for buffer
18:13:54.197 T:1271911328 ERROR: CDVDAudio::AddPacketsRenderer - timeout adding data to renderer
18:13:54.512 T:1444934560 WARNING: CRenderManager::WaitForBuffer - timeout waiting for buffer
18:13:54.991 T:1939760032 ERROR: ActiveAE::FlushEngine - failed to flush
18:13:55.405 T:1271911328 ERROR: CDVDAudio::AddPacketsRenderer - timeout adding data to renderer
18:13:59.991 T:1939760032 ERROR: Previous line repeats 3 times.
18:13:59.992 T:1939760032 ERROR: ActiveAE::InitSink - failed to init
18:13:59.992 T:1939760032 WARNING: CActiveAE::StateMachine - signal: 10 from port: OutputControlPort not handled for state: 1
18:13:59.992 T:1939760032 WARNING: CActiveAE::StateMachine - signal: 11 from port: OutputControlPort not handled for state: 1
18:14:00.235 T:1271911328 ERROR: CDVDAudio::AddPacketsRenderer - timeout adding data to renderer
18:14:01.114 T:1929376672 ERROR: CAESinkALSA::HandleError(snd_pcm_writei(2)) - snd_pcm_writei returned -5 (Input/output error)
18:14:01.118 T:1929376672 ERROR: CActiveAESink::OutputSamples - failed
18:14:01.442 T:1271911328 ERROR: CDVDAudio::AddPacketsRenderer - timeout adding data to renderer

<Log ediited>
Resetting to 7.90.010 everything is fine

**chewitt** · February 1, 2017 at 2:05 AM Official Post

That's not a debug log, and worse it's not a compete debug log. Enable debug logging, clean reboot, demonstrate the problem, then use "cat /storage/.kodi/temp/kodi.log | paste" to pastebin the log and share the URL generated here.

**vpeter** · February 1, 2017 at 8:05 AM

The only known issue with sound is that there are no gui sounds immediately after boot. Still investigating what is the cause.

**Iridium** · February 1, 2017 at 3:02 PM Official Post

It seems to be related to the upgrade. I installed 7.95.1 and all worked as expected. I then downgraded to 7.90.10 and everything worked as expected. I then upgraded to 7.95.1.

When playing a video, the error occurs in the log and the screen goes black. However. if you then try and play the video again, it all works.

Rebooted: The first time you try to play a video it just hangs. Esc out and then go back to playing and it all works.

FbXG

**Iridium** · February 11, 2017 at 6:36 PM Official Post

Same issue with 7.95.2

I believe vpeter is looking at this.

I'll do a clean install of 7.95.2 and see if this eliminate the problem.

bastrzol · February 12, 2017 at 3:07 PM

Quote from Iridium

Same issue with 7.95.2

I believe vpeter is looking at this.

I'll do a clean install of 7.95.2 and see if this eliminate the problem.

Got this same problem, did anyone find a sollution?

**DaVu** · February 13, 2017 at 1:58 PM Official Post

Quote from bastrzol

Got this same problem, did anyone find a sollution?

Own problem, own thread, own debug log please.

**vpeter** · February 13, 2017 at 2:05 PM

Quote from DaVu

Own problem, own thread, own debug log please.

No need.
Seems for now only version with 3.14 kernel is not affected with this bug: LibreELEC-imx6.arm-7.95.3-sr-3.14.img.gz

IMX6 V7.95.1 sound issues.

Similar Threads

CEC / HDMI commands Cubox