remote.conf repository

Tap pro remote.conf ? Anyone have ?

Quote from Axee

Tap pro remote.conf ? Anyone have ?

What version of Libreelec do you have? the later versions, use a different remote config file

also, look at some of the pictures of remotes, in this thread, you may find one that is close

Kszaq last update version for S912 devices. Works good. Remote is on the picture, i didnt dind anyrhing similar remote.conf file.

you can try creating one from scratch, Create remote.conf from scratch

Quote from Ygdrassil

#

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

#

# This file can be used with Open/LibreElec for the configuration of a factory

# remote control for: T95x, QBOX, NEXBOX and possible other brands of

# Smart Android Tv Boxes using the Amlogic U2C remote controller

#

# Location of remote.conf: root of the Open/LibreElec startup disk (USB, MC, NaND)

#

# factory_code each device has it's unique factory code.

# pattern: custom_code(16bit) + index_code(16bit)

# examble: 0xff000001 = 0xff00(custom_code) + 0001(index_code)

#

# work_mode

# 0 : software mode

# 1 : hardware mode

#

# repeat_enable

# 0 : disable repeat

# 1 : enable repeat

#

# release_delay unit: ms

# release will report from kernel to user layer after this period

# of time from press or repeat triggered.

#

# debug_enable
# 0 : debug disable

# 1 : debug enable

#

# SW MODE:

#

# bit_count how many bits in each frame

# tw_leader_act time window for leader active

# tw_bit0 time window for bit0 time.

# tw_bit1 time window for bit1 time

# tw_repeat_leader time window for repeat leader

#

# REG:

#

# reg_base_gen set value for PREG_IR_DEC_BASE_GEN

# reg_control set value for PREG_IR_DEC_CONTROL

# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE

# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE

# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE

# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME

#

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

#

# KEY ASSIGNMENT FORMAT:

#

# KEY ACTION #COMMENT

#

# 0x00 000 #EXAMPLE

#

# ORIGINAL:

#

# 0x5f 45 #X-STOP (K-SQUARE)

#

# ADJUSTED:

#

# 0x5f 113 #MUTE (K-SQUARE)

#

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

#

# Amlogic U2C remote (Blue OK button and TV controls, red power button).

#

factory_code = 0xdf000001

work_mode = 0

repeat_enable = 1

repeat_delay = 40

repeat_peroid = 39

release_delay = 121

debug_enable = 1

#

fn_key_scancode = 0x03 #MOUSE

left_key_scancode = 0x47 #LEFT

right_key_scancode = 0x07 #RIGHT

up_key_scancode = 0x1a #UP

down_key_scancode = 0x48 #DOWN

ok_key_scancode = 0x06 #OK

#

mouse_begin

#

0 0x47 #LEFT

1 0x07 #RIGHT

2 0x1a #UP

3 0x48 #DOWN3

#

mouse_end

#

key_begin

#

0x1c 31 #S-POWERMENU (POWER)

0x01 164 #PLAYPAUSE (TV)

0x5f 113 #MUTE (KBUTTON)

0x4b 168 #REWIND (|<<)

0x4f 208 #FASTFORWARD (>>|)

#

0x47 105 #LEFT

0x07 106 #RIGHT

0x1a 103 #UP

0x48 108 #DOWN

0x06 28 #ENTER (OK)

#

0x42 102 #HOME (HOUSE)

0x0a 14 #BACKSPACE (BACK ARROW)

0x18 46 #CONTEXTMENU (DOCUMENT)

#

0x0c 11 #KEY No.0

0x54 2 #KEY No.1

0x16 3 #KEY No.2

0x15 4 #KEY No.3

0x50 5 #KEY No.4

0x12 6 #KEY No.5

0x11 7 #KEY No.6

0x4c 8 #KEY No.7

0x0e 9 #KEY No.8

0x0d 10 #KEY No.9

#

0x10 24 #O-CODEC INFO (BACKSPACE)

0x41 23 #INFO (GLOBE)

#

0x5c 114 #VOLUMEDOWN (VOL-)

0x5d 115 #VOLUMEUP (VOL+)

#

repeat_key_begin

#

0x47 105 #LEFT

0x07 106 #RIGHT

0x1a 103 #UP

0x48 108 #DOWN

0x5d 104 #PAGEUP (VOL+)

0x5c 109 #PAGEDOWN (VOL-)

#

repeat_key_end

#

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# #

## ##

### 0x52 nn #MOUSE (!!! NEVER !!! use this line, this key is mapped in fn_key_scancode) ###

## ##

# #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

#

# UNASSIGNED

#

# 0x5f 45 #X-STOP (THUMBS UP)

#

# 0x4d 113 #MUTE

# 0x09 364 #FAVORITES

# 0x42 102 #HOME

# 0x0a 14 #BACK

# 0x4f 171 #CONFIG

#

# 0x09 398 #RED

# 0x11 399 #GREEN

# 0x54 400 #YELLOW

# 0x4f 401 #BLUE

#

# 0x5d 104 #PAGEUP

# 0x5c 109 #PAGEDOWN

#

key_end

#

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

#

A95X_Remote_Blue.zip

Display More

So all I have to do is a simple drag and drop on to my MicroSD card to get this configuration file to work?

Quote from teeanderson90

So all I have to do is a simple drag and drop on to my MicroSD card to get this configuration file to work?

yes, into the correct location, then reboot

Old man need some help,remote config for the Venz pro v10,,,,

Thanx

Quote from theike

Old man need some help,remote config for the Venz pro v10,,,,

Thanx

By googling I found this How to install LibreELEC Kodi on Venz V10 Pro around 10 mintutes using USB boot stick you need to join & log in to download the attachment, not sure if it will work.

Thanks all working except the context menu is going back to system.

try reading Create remote.conf from scratch

Thanks but is it nothing else than change a line like c# contexmenu.

Not good on shh things….63 and mi eyes are bad..

Never mind used the kodi keymap editor,ok now.

Hi guys!

I would need some help.

I have Xtreamer Whizz:

SoC: Amlogic S905-H

CPU: quad-core Cortex A53

GPU: penta-core Mali 450

RAM: 2GB DDR3

ROM: 16GB eMMC

LAN: Gigabit

Wi-fi: Dual band 2x2 MIMO 802.11ac

I flash it with USB to LE-S905.arm-8.2-8.2.3.1.img and device tree gxbb_p200_2G_1Gbit.dtb.

After few tries it flash up, but now I stuck in LE configuration, because remote is not working.

I read a lot at this forum and download several remote.conf.

With computer I access Whizz, found Configfiles folder and copy remote.conf one after another in that folder.

I unplug Whizz from outlet and plug it back every time to make restart.

I can't make my remote to work.

Can anybody help?

Regards

Quote from bubblegum57

did you copy the remote.conf to \storage\config ?

to get access to that, you need to enable ssh in the initial Libreelec settings on first boot use a keyboard if neccessary

Just tried this with LibreELEC 8.2 for S912 and T95Z with no success

Quote from Ygdrassil

#

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

#

# This file can be used with Open/LibreElec for the configuration of a factory

# remote control for: T95x, QBOX, NEXBOX and possible other brands of

# Smart Android Tv Boxes using the Amlogic U2C remote controller

#

# Location of remote.conf: root of the Open/LibreElec startup disk (USB, MC, NaND)

#

# factory_code each device has it's unique factory code.

# pattern: custom_code(16bit) + index_code(16bit)

# examble: 0xff000001 = 0xff00(custom_code) + 0001(index_code)

#

# work_mode

# 0 : software mode

# 1 : hardware mode

#

# repeat_enable

# 0 : disable repeat

# 1 : enable repeat

#

# release_delay unit: ms

# release will report from kernel to user layer after this period

# of time from press or repeat triggered.

#

# debug_enable
# 0 : debug disable

# 1 : debug enable

#

# SW MODE:

#

# bit_count how many bits in each frame

# tw_leader_act time window for leader active

# tw_bit0 time window for bit0 time.

# tw_bit1 time window for bit1 time

# tw_repeat_leader time window for repeat leader

#

# REG:

#

# reg_base_gen set value for PREG_IR_DEC_BASE_GEN

# reg_control set value for PREG_IR_DEC_CONTROL

# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE

# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE

# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE

# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME

#

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

#

# KEY ASSIGNMENT FORMAT:

#

# KEY ACTION #COMMENT

#

# 0x00 000 #EXAMPLE

#

# ORIGINAL:

#

# 0x5f 45 #X-STOP (K-SQUARE)

#

# ADJUSTED:

#

# 0x5f 113 #MUTE (K-SQUARE)

#

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

#

# Amlogic U2C remote (Blue OK button and TV controls, red power button).

#

factory_code = 0xdf000001

work_mode = 0

repeat_enable = 1

repeat_delay = 40

repeat_peroid = 39

release_delay = 121

debug_enable = 1

#

fn_key_scancode = 0x03 #MOUSE

left_key_scancode = 0x47 #LEFT

right_key_scancode = 0x07 #RIGHT

up_key_scancode = 0x1a #UP

down_key_scancode = 0x48 #DOWN

ok_key_scancode = 0x06 #OK

#

mouse_begin

#

0 0x47 #LEFT

1 0x07 #RIGHT

2 0x1a #UP

3 0x48 #DOWN3

#

mouse_end

#

key_begin

#

0x1c 31 #S-POWERMENU (POWER)

0x01 164 #PLAYPAUSE (TV)

0x5f 113 #MUTE (KBUTTON)

0x4b 168 #REWIND (|<<)

0x4f 208 #FASTFORWARD (>>|)

#

0x47 105 #LEFT

0x07 106 #RIGHT

0x1a 103 #UP

0x48 108 #DOWN

0x06 28 #ENTER (OK)

#

0x42 102 #HOME (HOUSE)

0x0a 14 #BACKSPACE (BACK ARROW)

0x18 46 #CONTEXTMENU (DOCUMENT)

#

0x0c 11 #KEY No.0

0x54 2 #KEY No.1

0x16 3 #KEY No.2

0x15 4 #KEY No.3

0x50 5 #KEY No.4

0x12 6 #KEY No.5

0x11 7 #KEY No.6

0x4c 8 #KEY No.7

0x0e 9 #KEY No.8

0x0d 10 #KEY No.9

#

0x10 24 #O-CODEC INFO (BACKSPACE)

0x41 23 #INFO (GLOBE)

#

0x5c 114 #VOLUMEDOWN (VOL-)

0x5d 115 #VOLUMEUP (VOL+)

#

repeat_key_begin

#

0x47 105 #LEFT

0x07 106 #RIGHT

0x1a 103 #UP

0x48 108 #DOWN

0x5d 104 #PAGEUP (VOL+)

0x5c 109 #PAGEDOWN (VOL-)

#

repeat_key_end

#

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

# #

## ##

### 0x52 nn #MOUSE (!!! NEVER !!! use this line, this key is mapped in fn_key_scancode) ###

## ##

# #

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

#

# UNASSIGNED

#

# 0x5f 45 #X-STOP (THUMBS UP)

#

# 0x4d 113 #MUTE

# 0x09 364 #FAVORITES

# 0x42 102 #HOME

# 0x0a 14 #BACK

# 0x4f 171 #CONFIG

#

# 0x09 398 #RED

# 0x11 399 #GREEN

# 0x54 400 #YELLOW

# 0x4f 401 #BLUE

#

# 0x5d 104 #PAGEUP

# 0x5c 109 #PAGEDOWN

#

key_end

#

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

#

A95X_Remote_Blue.zip

Display More

I have this blue remote for the T95Z Plus and I put it in the root folder but it does not work.

Is this for LibreELEC-S912.arm-8.2xxx?

Quote from youjean

I have this blue remote for the T95Z Plus and I put it in the root folder but it does not work.

Is this for LibreELEC-S912.arm-8.2xxx?

You need to put it in \storage\config I can't see that from your picture. I use coreftp lite to copy files

Now I put it in storage\.config and rebooted… But it is still not working

Quote from youjean

Now I put it in storage\.config and rebooted… But it is still not working

Then all I can suggest is youread this Create remote.conf from scratch