Hyperion

// Automatically generated configuration file for 'Hyperion daemon'
// Generated by: HyperCon (The Hyperion deamon configuration file builder


{
    /// Device configuration contains the following fields:
    /// * 'name'       : The user friendly name of the device (only used for display purposes)
    /// * 'type'       : The type of the device or leds (known types for now are 'ws2801', 'ldp8806',
    ///                  'lpd6803', 'sedu', 'adalight', 'lightpack', 'test' and 'none')
    /// * 'output'     : The output specification depends on selected device. This can for example be the
    ///                  device specifier, device serial number, or the output file name
    /// * 'rate'       : The baudrate of the output to the device
    /// * 'colorOrder' : The order of the color bytes ('rgb', 'rbg', 'bgr', etc.).
    "device" :
    {
        "name"       : "MyOdroidC2",
        "type"       : "philipshue",
        "output"     : "192.168.178.195",
        "username"   : "username",
        "colorOrder" : "rgb",
        "switchOffOnBlack" : true,
        "lightIds"   : [15,17]
    },


    /// Color manipulation configuration used to tune the output colors to specific surroundings.
    /// The configuration contains a list of color-transforms. Each transform contains the
    /// following fields:
    ///  * 'id'   : The unique identifier of the color transformation (eg 'device_1')    ///  * 'leds' : The indices (or index ranges) of the leds to which this color transform applies
    ///             (eg '0-5, 9, 11, 12-17'). The indices are zero based.    ///  * 'hsv' : The manipulation in the Hue-Saturation-Value color domain with the following
    ///            tuning parameters:
    ///            - 'saturationGain'  The gain adjustement of the saturation
    ///            - 'valueGain'       The gain adjustement of the value
    ///  * 'red'/'green'/'blue' : The manipulation in the Red-Green-Blue color domain with the
    ///                           following tuning parameters for each channel:
    ///            - 'threshold'       The minimum required input value for the channel to be on
    ///                                (else zero)
    ///            - 'gamma'           The gamma-curve correction factor
    ///            - 'blacklevel'      The lowest possible value (when the channel is black)
    ///            - 'whitelevel'      The highest possible value (when the channel is white)
    ///
    /// Next to the list with color transforms there is also a smoothing option.
    ///  * 'smoothing' : Smoothing of the colors in the time-domain with the following tuning
    ///                  parameters:
    ///            - 'type'            The type of smoothing algorithm ('linear' or 'none')
    ///            - 'time_ms'         The time constant for smoothing algorithm in milliseconds
    ///            - 'updateFrequency' The update frequency of the leds in Hz
    "color" :
{
"channelAdjustment" :
[
{
"id"   : "device2",
"leds" : "15,17",
"pureRed" :
{
"redChannel" : 58,
"greenChannel" : 0,
"blueChannel" : 0
},
"pureGreen" :
{
"redChannel" : 0,
"greenChannel" : 94,
"blueChannel" : 0
},
"pureBlue" :
{
"redChannel" : 0,
"greenChannel" : 0,
"blueChannel" : 15
}
}
],
"temperature" :
[
{
"id"   : "default",
"leds" : "*",
"correctionValues" :
{
"red" : 255,
"green" : 255,
"blue" : 255
}
}
],
"transform" :
[
{
"id"   : "default",
"leds" : "*",
"hsl" :
{
"saturationGain" : 1.2500,
"luminanceGain" : 1.1000,
"luminanceMinimum" : 1.0000
},
"red" :
{
"threshold" : 0.0000,
"gamma"     : 2.5000
},
"green" :
{
"threshold" : 0.0000,
"gamma"     : 2.5000
},
"blue" :
{
"threshold" : 0.0000,
"gamma"     : 2.5000
}
}
],
// SMOOTHING CONFIG
"smoothing" :
{
"type"            : "none",
"time_ms"         : 200,
"updateFrequency" : 30.0000,
"updateDelay"     : 0
}
},


    ///  The configuration for each individual led. This contains the specification of the area
    ///  averaged of an input image for each led to determine its color. Each item in the list
    ///  contains the following fields:
    ///  * index: The index of the led. This determines its location in the string of leds; zero
    ///           being the first led.
    ///  * hscan: The fractional part of the image along the horizontal used for the averaging
    ///           (minimum and maximum inclusive)
    ///  * vscan: The fractional part of the image along the vertical used for the averaging
    ///           (minimum and maximum inclusive)
    "leds" :
    [
        {
            "index" : 0,
            "hscan" : { "minimum" : 0.0000, "maximum" : 0.1000 },
            "vscan" : { "minimum" : 0.0000, "maximum" : 1.0000 }
        },
        {
            "index" : 1,
            "hscan" : { "minimum" : 0.9000, "maximum" : 1.0000 },
            "vscan" : { "minimum" : 0.0000, "maximum" : 1.0000 }
        }
    ],


    /// The black border configuration, contains the following items:
    ///  * enable    : true if the detector should be activated
    ///  * threshold : Value below which a pixel is regarded as black (value between 0.0 and 1.0)
    "blackborderdetector" :
    {
        "enable" : true,
        "threshold" : 0.01
    },


    /// The configuration of the effect engine, contains the following items:
    ///  * paths        : An array with absolute location(s) of directories with effects
    ///  * bootsequence : The effect selected as 'boot sequence'
    "effects" :
    {
        "paths" :
        [
            "/storage/.kodi/addons/service.hyperion/effects"
        ]
    },


    "bootsequence" :
    {
        "effect" : "Rainbow swirl fast",
        "duration_ms" : 4000
    },


    ///  The configuration for the frame-grabber, contains the following items:
    ///   * width        : The width of the grabbed frames [pixels]
    ///   * height       : The height of the grabbed frames [pixels]
    ///   * frequency_Hz : The frequency of the frame grab [Hz]


       "amlgrabber" : 
   {
      "width" : 64,
      "height" : 64,
      "frequency_Hz" : 5.0,
      "priority" : 799
   },










    /// The configuration of the XBMC connection used to enable and disable the frame-grabber. Contains the following fields:
    ///  * xbmcAddress       : The IP address of the XBMC-host
    ///  * xbmcTcpPort       : The TCP-port of the XBMC-server
    ///  * grabVideo         : Flag indicating that the frame-grabber is on(true) during video playback
    ///  * grabPictures      : Flag indicating that the frame-grabber is on(true) during picture show
    ///  * grabAudio         : Flag indicating that the frame-grabber is on(true) during audio playback
    ///  * grabMenu          : Flag indicating that the frame-grabber is on(true) in the XBMC menu
    ///  * grabScreensaver   : Flag indicating that the frame-grabber is on(true) when XBMC is on screensaver
    ///  * enable3DDetection : Flag indicating that the frame-grabber should switch to a 3D compatible modus if a 3D video is playing


       // KODI CHECK CONFIG
"xbmcVideoChecker" : 
{
"xbmcAddress" : "192.168.178.20",
"xbmcTcpPort" : 9090,
"grabVideo" : true,
"grabPictures" : true,
"grabAudio" : true,
"grabMenu" : true,
"grabPause" : true,
"grabScreensaver" : true,
"enable3DDetection" : false
},


    /// The configuration of the Json server which enables the json remote interface
    ///  * port : Port at which the json server is started
    "jsonServer" :
    {
        "port" : 19446
    },


    /// The configuration of the Proto server which enables the protobuffer remote interface
    ///  * port : Port at which the protobuffer server is started
    "protoServer" :
    {
        "port" : 19447
    },


    /// The configuration of the boblight server which enables the boblight remote interface
    ///  * port : Port at which the boblight server is started
//     "boblightServer" :
//     {
//         "port" : 19333
//     },


    "endOfJson" : "endOfJson"
}