RetroELEC Kodi+Wayland+Emulationstation+RetroArch (x86/XU4/RPi)

Okay so getting closer.
Xbox controller works in kodi menu and emulation station menus but not in game?

Also this is output from alsa -L what should conf file be

##############################################
# LibreELEC #
# LibreELEC – Just enough OS for KODI #
##############################################

LibreELEC (community) Version: devel-20170108
LibreELEC git: f5dd3bf0f25d600072fa0d355dfe2650c9dac047
LibreELEC:~ # aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=PCH
HDA Intel PCH, ALC269VB Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
LibreELEC:~ #

Sent from my SM-G925F using Tapatalk

Quote from escalade

Unfortunately, the Emulationstation mappings are only used for ES. RetroArch has it's own controller config, so does FS-UAE, VICE and Dolphin.

You should use hdmi:CARD=PCH,DEV=0 or hdmi:CARD=PCH,DEV=1 in asound.conf if you want sound through HDMI.

Thanks got the sound cheers, so how do I start doing retroarch mappings?

Sent from my iPad using Tapatalk

Quote from escalade

In the menus, shortcuts are on the first page.

Thanks I ssh'd in and ran retroarch.sh and configured input there. Happy days awesome work thanks a bunch, will send a donation when I've finished playing.

Sent from my iPad using Tapatalk

Quote from jayfkay

When i had this problem, my "smart" tv automatically overscanned, so i calibrated it in Kodi, but then ES resolution was butched.

When i fixed the TV panning, Kodi and ES resolution were normal (i gues they always were...)

TY. I check my TV settings and changed resolution to by size (dont know how it right in english). Now all is ok.

Отправлено с моего Nexus 5X через Tapatalk

Quote from Thomas233

If I install it from scratch, after booting into the system, I can see the LE logo and then it switches to a blank black screen.
Then I can see the cursor coming up but after some time it dissapears and then comes back again.
This happens ages of time, the display stays black and the cursor keeps blinking. I can hear the hard disk working all the time.
I`ve been waiting for minutes.
It looks like a boot loop.

I`ve used the "LibreELEC-Generic.x86_64-8.0-devel-20170108.img.gz" image.

Display More

I have the same issue after upgrading from 20170102. Had to downgrade back to solve the boot loop.

Guys, when i try to change language in retroarch nothing occurend. How i can change language in retroarch. and the second question how (or where) i can set a gamepad button combination to easy exit from retroarch?

Quote from escalade

No logs no error.

Will try and get a log at some point. The Mrs will kill me if kill the tv again where would I locate the kernel log just in case it's not a kodi issue.
[hr]

Quote from a855

Guys, when i try to change language in retroarch nothing occurend. How i can change language in retroarch. and the second question how (or where) i can set a gamepad button combination to easy exit from retroarch?

Look for hot keys in retroarch input. Set a button to act as the hokey and then set a button to exit.

I need help. With controllers. I have: 1 DS3, 1 DS3 compatible (Tracer Trooper BLUETOOTH PS3) and Steam Controller. This 2 DS3 works perfectly. But I can't make to SC to work in Moonlights (so also in Steam Big Picture). I need to notice that all of them works quite well in Kodi.

I know Moonlight have maping function, but I don't know how to attach this map files to an icon in Kodi, which actually starts my Moonlight add-on? Also I think problem is with config in Moonlight. In its options you can pick a *.map file profile for controllers, but only one. So in my case, Moonlight is trying to map DS3 profile to all my controllers. As of that there is a problem with SC.

PS. In Steam run by Moonlight I am able to use all buttons, triggers, joysticks on DS3 pads, but on SC, only analog joystick works.

Any help?

Hi,

Tried to install your version on my tronsmart iz37 based om recomendation from tronsmart forum

I already have the base libreelec installed with grub and all, and try to use your version as update from tar
This is based or piotrasd said:
2607-libreelec-8-special-build-for-iz37-by-tronsmart?limitstart=0#15996

But I get this, with all atom versions I tried: (latest i tried is 0108 - LibreELEC-Generic.Atom.x86_64-8.0-devel-20170108)

*** Error in mount_flash: mount_common: Could not mount /dev/ mmcblk0p1 ***
### Starting debugging shell ... type exit to quit ###
sh: can not access tty: job control turned off
#

Can you help me understand and fix the issue?

maybe this is because the drive is called mmcblk0 ??? (when i install the libreelec base)

Quote from lefty420

[hr]

Look for hot keys in retroarch input. Set a button to act as the hokey and then set a button to exit.

Ok ty. i find this setting and set a button. Now its work perfectly.

My machine is iz37.

How do I mount manually?

alon24

mount -o remount,ro /flash

Cannot find /flash in /proc/mounts